Transparent Semiconducting Oxide Technology for Touch Free Interactive Flexible Displays

Abstract

This paper reviews the current status of the ubiquitous oxide semiconductor technology for flexible and transparent interactive displays.ABSTRACT | Amorphous oxide semiconductor thin film transistors and sensors constitute fundamental building blocks for a new generation of applications ranging from interactive displays and imaging to future electronic systems that are unconstrained by form factor. This makes the quest for high mobility materials processed at low temperatures even more compelling, to enable the layering of circuits and systems on plastic and possibly even paper substrates. Transparency is also an attractive feature that enables seamless embedding of electronics for the immersive ambient. This paper reviews the current status of the ubiquitous oxide semiconductor technology for flexible and transparent interactive displays, along with demonstrated examples of continuous thin film and nanowire systems for the transistor and sensor. Issues related to photosensing and active matrix operation are discussed along with solutions addressing the problem of threshold voltage instability and its compensation for fast recovery, particularly after light stress. Physics-based compact models for expedient design and simulation of analog and digital circuits are reviewed along with examples of key system building blocks. Finally we attempt to conceptualize a thin film transistor (TFT)-based fully heterogeneously integrated and autonomous system that can be realized using a combination of oxide and other technological routes. KEYWORDS | Active matrix organic light emitting diode (AMOLED); amorphous oxide semiconductors (AOS); interactive displays; nanowire transistors; oxygen defects; thin film transistors (TFTs) Manuscript

Metal oxide semiconductor thin-film transistors for flexible electronics

“…Emerging new applications like smart labels 1 and intelligent packaging, 2 wearable 1-4 and textile integrated systems, [5][6][7] seamless and embedded patch-like electronics, 8,9 epidermal devices, [10][11][12][13][14][15][16] artificial skins for robots, [17][18][19] imperceptible [20][21][22] biomimetic 23 and transient [24][25][26] medical implants, as well as advanced surgical tools 13,15,27,28 promise to revolutionize our daily life. To enable all these applications, electronic devices have to become flexible, lightweight, transparent, conformable, stretchable, and even biocompatible and biodegradable.…”

Direct Printing of Capacitive Touch Sensors on Flexible Substrates by Additive E-Jet Printing With Silver Nanoinks

“…Flexible electronics have been rapidly developed in the last few years and have shown a good potential to be the next technology revolution in electronics; similar to the way integrated circuits was in the 1960s. Flexible electronics are not only flexible mechanically but also flexible in functionalities in all kinds of applications, ranging from personal devices (wearable devices [1,2]), electronic memory devices [3] to large area sensors (biomedical sensor arrays [4], solar cells [5,6], flexible displays [7,8]), and radio-frequency identification devices [9]. The flexible electronics began with single-crystalline silicon solar cells used in extraterrestrial satellites back to the 1960s [10,11].…”

Wavelength-dependent Optical Instability Mechanisms and Decay Kinetics in Amorphous Oxide Thin-Film Devices

“…So, the a-IGZO can be preferred for a channel layer for a higher performance thin-film transistor 5 . Despite those advantages, the AOS has issues associated with oxygen defects which influence electrical properties during illumination 6–9 . These oxygen defects are generally classified into two kinds, i.e.…”