Solar and Shading Potential of Different Configurations of Building Integrated Photovoltaics Used as Shading Devices Considering Hot Climatic Conditions

Abstract

This study investigates the use of building-integrated photovoltaics (BIPVs) as shading devices in hot climates, with reference to the conditions of Saudi Arabia. It used parametric numerical modelling to critically appraise the potential of eight design configurations in this regard, including vertical and horizontal shading devices with different inclination angles. The study assumed that the examined shading devices could be entirely horizontal or vertical on the three exposed facades, which is common practice in architecture. The study found that the examined configurations offered different solar and shading potentials. However, the case of horizontal BIPV shading devices with a 45° tilt angle received the highest amount of annual total insolation (104 kWh/m2) and offered effective window shading of 96% of the total window area on average in summer. The study concluded that, unlike the common recommendation of avoiding horizontal shading devices on eastern and western facades, it is possible in countries characterised with high solar altitudes such as Saudi Arabia to use them effectively to generate electricity and provide the required window shading.

Performance Evaluation and Optimization of a Building-Integrated Photovoltaic/Thermal Solar Water Heating System for Exterior Shading: A Case Study in South China

“…Building-integrated photovoltaic (BIPV) systems consist of the integration of PV modules into building envelope [3]. In BIPV systems, PV modules simultaneously serve as building envelope material and power generator, and have been widely used for exterior shading [4,5]. There is a likelihood of performance degradation in a BIPV system due to various factors, including the increase of PV module temperature [6].…”

Review on Building-Integrated Photovoltaics Electrical System Requirements and Module-Integrated Converter Recommendations

“…The second category further distinguishes cold and warm façades, depending on whether the BIPV modules contain a ventilated air gap or not. Additionally, accessories exist such as parapets, balconies, and solar shadings not belonging directly to the building skin [42].…”

Performance Analysis of Photovoltaic Integrated Shading Devices (PVSDs) and Semi-Transparent Photovoltaic (STPV) Devices Retrofitted to a Prototype Office Building in a Hot Desert Climate

“…In the north-western province of Ha'il, domestic energy consumption has skyrocketed to unprecedented levels, leading to increasingly frequent power outages during the harsh summer months, and sometimes during the unusually cold winters as well, when power demands peak. At present, the Kingdom is in the midst of implementing its ambitious Saudi Vision 2030 programme; an undertaking that seeks to drive economic development by building a thriving, diversified, and sustainable economy [4,5]. However, satisfying increasing domestic and industrial electricity demands while keeping greenhouse gas emissions low is a major challenge.…”