Design and Realization of Compact Microstrip Antenna Using Fractal Sierpenski Carpet For Wireless Fidelity Application

Alam, Syah; Surjati, Indra; Ferawan, Awang

doi:10.11591/ijeei.v6i1.390

Cited by 10 publications

(9 citation statements)

References 9 publications

Supporting

Mentioning

Contrasting

Unclassified

Order By: Relevance

“…The MMA is a type of the radio antenna formed by replacing one half of a dipole antenna with a ground plane at right angles to the remaining half. If the ground plane is large enough, the monopole behaves exactly like a dipole, as if its reflection in the ground plane formed the missing half of the dipole [8].…”

Section: Monopole Microstrip Antennamentioning

confidence: 99%

Simulation and manufacturing of modified circular monopole microstrip antenna for UWB applications

Taha¹,

Marhoon²

2021

IJAAS

View full text Add to dashboard Cite

Ultra-wideband (UWB) technology is one of the most promising wireless communication solutions to be developed quickly because of the high-speed data, wide bandwidth and excellent immunity to multipath interference. In this work, the compact design of a modified circular monopole microstrip antenna is simulated and manufactured for the UWB applications. The simulation process of the proposed antenna was done based on the finite integration of the Computer Simulation Technology (CST) Microwave Studio (MWS). The proposed antenna comprises a copper radiating patch, Roger’s Kappa-438 substrate, and a single stub act as a reflector. The simulation results showed a reasonable agreement with the results of the measurement and good performance was achieved in the range from 1.8 to 10 GHz with VSWR less than 2.0.

show abstract

Section: Monopole Microstrip Antennamentioning

confidence: 99%

Simulation and manufacturing of modified circular monopole microstrip antenna for UWB applications

Taha¹,

Marhoon²

2021

IJAAS

View full text Add to dashboard Cite

show abstract

“…Where ( , ) and ( , ) is are the basic functions on the patch and on the probe respectively and, ( ℎ ) is the attachment mode [14] For more information on the subject see Refrence [2,[15][16][17][18][19][20][21][22].…”

Section: Geometry Elliptical Antenna Array Factormentioning

confidence: 99%

Enhancement gain of broadband elliptical microstrip patch array antenna with mutual coupling for wireless communication

Jassim

Thaher

2019

IJEECS

View full text Add to dashboard Cite

The paper is presented analysis, design and manufacturing single optimize parameters of a new broadband elliptical patch antenna with microstrip center feed line and the array has been implemented to improve gain antenna. The antenna array dimension of mm3 and fabricated on an FR-4 epoxy substrate having relative dielectric constant =4.3, loss tangent tan (δ) =0.002 and the feed line used has characteristic impedance of 50Ω and added the triangle notch structure .Thus notch can achieve maximal additional enhancement impedance bandwidth are (3.679- 6.578) GHz, (13.84-25.142) GHz, (29.807-37.618) GHz and the gain 8dBi. The antenna array performance was modified by inserting stubs transition in feeding Microstrip line to reducing mutual coupling achieve impedance bandwidth (when S11-10dB). The modified antenna was designed to be used for wireless communication application. The simulation results are obtained using CST software.

show abstract

“…To determine the dimensions of W and L of the initial design antenna we can use the equations below (1), (2), (3) and (4) [16]. The width dimension of the microstrip line feeder of 50 Ohm (Wf) is obtained using equations (6) and (7) [17]. The design of the rectangular microstrip antenna can be seen in Figure 1.…”

Section: Design Of Antennamentioning

confidence: 99%

Design Of Array and Circular Polarization Microstrip Antenna For LTE Communication

et al. 2018

Self Cite

View full text Add to dashboard Cite

This paper proposes a high gain microstrip antenna with circular polarization for LTE applications at a working frequency of 2300 MHz. Gain of antenna is optimized by using an array method with 4 elements arranged in plannar using feed line of 50 Ohm, 100 Ohm and 70.7 Ohm. The proposed antenna designed using FR-4 substrate with (Ɛr) = 4.3, substrate thickness (h) of 1.6 mm and loss tangent (tan δ) of 0.0265. Gain of antenna can be optimized by increasing the number of elements in the array of the antenna. Circular polarization can be obtained by cutting the edge of a rectangular patch antenna with an angle of 45 0 . From the simulation results obtained reflection coefficient value of -20.02 dB and VSWR of 1.22 at the working frequency of 2300 MHz. The gain of proposed microstrip antenna is 10.56 dB with an impedance bandwidth value of 714 MHz (1925( -2639. The proposed antenna obtained a circular polarization with axial ratio of 1.745 dB at working frequency of 2300 MHz. Array method with four elements increased the gain of antena until 45.07% compared to the single element antenna.

show abstract

Design and Realization of Compact Microstrip Antenna Using Fractal Sierpenski Carpet For Wireless Fidelity Application

Cited by 10 publications

References 9 publications

Simulation and manufacturing of modified circular monopole microstrip antenna for UWB applications

Simulation and manufacturing of modified circular monopole microstrip antenna for UWB applications

Enhancement gain of broadband elliptical microstrip patch array antenna with mutual coupling for wireless communication

Design Of Array and Circular Polarization Microstrip Antenna For LTE Communication

Contact Info

Product

Resources

About