International audience
This work concerns the field of recycling of waste intobuilding materials. It reports on the possibility ofrecovering plastic waste and related products fromthe wood industry, in construction. The objective ofthe study is to give added value to wood-plasticcomposites produced using the cold compressionmolding process, by improving their mechanicalproperties. Through the bending test, the influence oftwo manufacturing parameters - compactionpressure and drying temperature after molding - onthe mechanical properties, was evaluated for the caseof a composite based on tropical wood sawdustcoming from Benin and recycled polystyrene (CBPo).It appears that the compaction pressure and thedrying temperature are essential factors to considerwhen evaluating the mechanical performance of thecomposite. Increasing the compaction pressure to alimit value significantly improves the properties of thematerial. The optimal properties of CBPo wereobtained at a pressure of 7 MPa. Post-forming dryingat 100 ° C also significantly improved the performanceof the composite. In addition, thanks to its enhancednew mechanical properties, the CBPo is repositionedrelatively to other existing materials, thus making itpossible to think about new applications inconstruction.
Ce travail concerne le domaine du recyclage dedéchets en matériaux. Il rend compte d’unepossibilité de valorisation de déchets plastiques et deproduits connexes de l’industrie du bois dans laconstruction. L’étude vise à donner une valeurajoutée à un composite bois-plastique élaborésuivant un procédé de moulage par compression àfroid, par l’amélioration de ses propriétésmécaniques. A travers un essai de flexion, l’influencede deux paramètres de fabrication - pression decompactage et température de séchage postmoulage- sur les propriétés mécaniques, a étéévaluée dans le cas d’un composite à base de sciuresde bois tropicaux venant du Bénin et de polystyrène(CBPo) recyclés. Il en ressort que la pression decompactage et la température de séchage, sont deuxfacteurs essentiels à considérer lors de l’évaluationdes performances mécaniques du composite.L’augmentation de la pression de compactage jusqu’àune valeur limite améliore significativement lespropriétés du matériau. Les propriétés optimales duCBPo ont été obtenues à la pression de 7 MPa. Leséchage post-moulage à 100°C, a également amélioréde façon significative les performances du composite.Aussi, par ses nouvelles performances mécaniques, leCBPo se repositionne par rapport à d’autresmatériaux existants permettant ainsi d’en envisagerde nouvelles applications dans la construction.