Resumo: Neste trabalho avaliou-se a influência do tratamento alcalino das fibras de curauá, nas concentrações de 1, 5 e 10%(m/v) de NaOH, nas propriedades dos compósitos com matriz de PHBV e 20% m/m de fibras de curauá. Os compósitos foram moldados por extrusão e injeção e avaliadas suas as propriedades morfológicas, térmicas e mecânicas. Os resultados de FTIR mostraram que o tratamento alcalino promoveu modificações na estrutura das fibras de curauá, comprovadas pela remoção da hemicelulose e da lignina, evidenciadas pela ausência das bandas típicas destes compostos. Nos compósitos com fibras de curauá tratadas com solução de NaOH na concentração de 5% apresentaram um aumento de 30% na resistência à flexão e 12% na resistência ao impacto, quando comparados aos compósitos com fibras sem tratamento. Estes resultados indicam que o tratamento alcalino promoveu uma melhoria na adesão das fibras na matriz, o que melhorou significativamente as propriedades mecânicas dos compósitos. Palavras-chave: Compósitos, PHBV, fibras de curauá, tratamento alcalino.
Effect of the Alkaline Treatments of Curauá Fiber on the Properties of Biodegradable Matrix CompositesAbstract: This study investigate the influence of alkaline treatment applied to Curauá fibers, at concentrations of 1, 5 and 10% (w/v) NaOH, on the properties of the composite of PHBV matrix with 20 wt % Curauá fiber. The composites were molded by extrusion and injection and their morphological, thermal and mechanical properties were evaluated. The results showed that alkali treatment caused modifications in the structure of the Curauá fibers by the removal of hemicellulose and lignin, as evidenced by the absence of the typical bands of these compounds in FTIR analysis. It was found an increase of 30% in flexural strength and 12% in impact resistance for the composites with fibers treated in 5% NaOH solution, in relation to composites with fibers without treatment. These results indicate that the alkaline treatment promoted an improvement in the adhesion of the fibers to the matrix, which significantly improved the mechanical properties of the composites. However, concentrations of NaOH solution different from 5% may have a deleterious effect on the mechanical properties of the fibers and composites.
O objetivo deste trabalho é utilizar fibras de algodão como material de reforço em materiais compósitos poliméricos utilizando o poliestireno como matriz e o poli(estireno-co-anidrido maleico) como agente compatibilizante. Os compósitos foram desenvolvidos em uma extrusora dupla-rosca co-rotacional, precedidos de uma pré-mistura em extrusora mono-rosca e moldados por injeção. Os compósitos foram avaliados mediante ensaios mecânicos, térmicos, termo dinâmico-mecânico e de morfologia dos compósitos produzidos. Os ensaios de flexão e tração mostram que a adição de 20% de fibra de algodão faz com que essas propriedades aumentem, sendo esse efeito intensificado em presença de compatibilizante. Observou-se aumento da resistência ao impacto com adição de carga; porém, os compósitos com compatibilizante apresentaram resultados inferiores. A HDT para os compósitos com 20% de fibra de algodão foi de aproximadamente 7 ºC. Por meio do TGA, observa-se que a adição de fibras de algodão desloca o início da perda de massa para temperaturas próximas a 200 ºC. Na análise de DMTA, observa-se que, com a adição da fibra de algodão, ocorre aumento na rigidez e no módulo de armazenamento. As micrografias mostram redução no pull-out das fibras, devido a uma maior adesão fibra/matriz, com a utilização do agente compatibilizante.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.