No abstract

Studies dealing with the development of edible/biodegradable packaging have been gaining popularity since these commodities are marked as being ecofriendly, especially when byproducts are incorporated. Consequently, this study aimed at the development of chitosan-based coatings with plant byproducts. Their sensory properties, colour attributes, occurrence of cracks in microstructure and biodegradability were analysed. Coatings containing grape and blueberry pomace had statistically significantly (p < 0.05) higher levels of colour intensity. Coating samples were characterised by lower aroma intensity (3.46–4.77), relatively smooth surface (2.40–5.86), and low stickiness (2.11–3.14). In the overall hedonic evaluation, the samples containing parsley pomace in all concentrations and a sample containing 5% grape pomace achieved a statistically significantly (p < 0.05) better evaluation (5.76–5.93). The lowest values of the parameter ΔE2000 were recorded for the sample containing 5% parsley pomace (3.5); the highest was for the sample with 20% blueberry pomace (39.3). An analysis of the coating surface microstructure showed the presence of surface cracks at an 80 K magnification but the protective function of the edible coating was not disrupted by the added plant pomace. The produced samples can be considered to have a high biodegradability rate. The results of our experimentally produced coatings indicate their possible application on a commercial scale.

Respondents' perception about the possible changes of best before date (BBD) to the date of the highest quality was the main aim of the survey. The survey consisted out of 1,107 respondents who were grouped according to their demographic characteristics and food labelling preferences. The results of the survey are indicating high acceptance rate towards new labelling, but without clear connection with their preferences. Another aspect of the research emphasised the respondents' perception towards the price of healthier food commodities and revealed that education level has high impact (P < 0.05) on their opinion and considerations. The survey gave important answers on possibility of changes of food labelling by which it would be affected food waste quantities. Certainly, each food type shelf life should be checked and labelled according to food perishability and consumers safeness. The changing of the BBD to the date of the highest quality according to our survey would be broadly accepted among all socio-demographic groups.

One of the options to determine botanical origin of trees or honey is the analysis of pollen grains. The characteristics of pollen grains in Czech flora has not been sufficiently described yet. Within this work, fruit trees pollen of Czech origin was characterized on the basis of morphological and spectral description of pollen grains produced by fruit species of M. domestica, P. armenica, P. persica, P. domestica, P. avium and P. cerasus. The morphological characterization results of the studied fruit species are consistent with results by other authors, but certain differences between the pollen grains of some fruit trees were confirmed. Most morphological differences were confirmed among the Malus and Prunus genera. Results of morphological and spectral analyzes further confirmed the differences between some types of fruit trees, but homogeneity remained for individual species even in mixed samples. Morphological and spectral analysis can therefore be used for botanical identification of pollen. If this knowledge is applied to pollen analysis in honey, these methods can also be used to verify the botanical origin of honey.

Melissopalynology is an important analytical method to identify botanical origin of honey. Pollen grain recognition is commonly performed by visual inspection by a trained person. An alternative method for visual inspection is automated pollen analysis based on the image analysis technique. Image analysis transfers visual information to mathematical descriptions. In this work, the suitability of three microscopic techniques for automatic analysis of pollen grains was studied. 2D and 3D morphological characteristics, textural and colour features, and extended depth of focus characteristics were used for the pollen discrimination. In this study, 7 botanical taxa and a total of 2482 pollen grains were evaluated. The highest correct classification rate of 93.05% was achieved using the phase contrast microscopy, followed by the dark field microscopy reaching 91.02%, and finally by the light field microscopy reaching 88.88%. The most significant discriminant characteristics were morphological (2D and 3D) and colour characteristics. Our results confirm the potential of using automatic pollen analysis to discriminate pollen taxa in honey. This work provides the basis for further research where the taxa dataset will be increased, and new descriptors will be studied.

Geographical and botanical origin of honeys can be characterized on the basis of physico-chemical composition, sensory properties and on the basis of melissopalynological analysis. No comprehensive description of the characteristics of Czech honey has been published so far. This study provides insights that are important for correct classification. The study analysed 317 samples of authentic honey from randomly selected localities. Due to the diversity of the landscape, the typical honey of the region is blend honey with a predominance of blossom honey. According to the pollen profile and electric conductivity, the honeys were sorted into the following: Brassica honey (BH), Floral honey (FH), Fruit tree honey (PH), Honeydew (HD), Lime tree honey (LH), Robinia pseudoacacia honey (RH), and Trifolium honey (TH). Physico-chemical properties, including higher carbohydrates, were determined for the honeys and their pollen profiles were examined. The physico-chemical properties and pollen profile are partially in compliance with the description of European monofloral honeys, except for RH and TH. Although they had the highest proportion of acacia pollen, amounting to >10% of all the Czech honeys, these RH honeys differ from the European standard, so they cannot be considered acacia honey. Further, PH honeys and FH polyfloral honeys were described. Most honeys contained a significant proportion of rapeseed pollen, which is one of the common agricultural crops grown in the Czech Republic. All the analysed honeys met the parameters defined by the legislation. Due to direct on-site sampling, honeys were characterized by a low 5-(hydroxymethyl)furfural (HMF) content (3.0 mg/kg) and high diastase activity (24.4 DN). Honeydew honeys had the highest proportion of higher carbohydrates, primarily of Melezitose (4.8 g/100 g) and Trehalose (1.3 g/100 g). The presence of higher carbohydrates was also confirmed in LH for Maltose (4.6 g/100 g) and Turanose (2.4 g/100 g).

The aim of the study was to analytically evaluate quantum dots in immunohistofluorescence (IHF-QD) microscopic imaging as detectors of food allergens—peanut and wheat. The experiment was designed as two in silico experiments or simulations: (a) models of pastry samples were prepared with the addition of allergenic components (peanut and wheat protein components) and without the addition of allergenic components, and (b) positive and negative commercial samples underwent food allergen detection. The samples from both simulations were tested by the ELISA and IHF-QD microscopic methods. The primary antibodies (secondary antibodies to a rabbit Fc fragment with labeled CdSe/ZnS QD) were labelled at 525, 585, and 655 nm emissions. The use of quantum dots (QDs) has expanded to many science areas and they are also finding use in food allergen detection, as shown in the study. The study indicated that differences between the ELISA and IHF-QD microscopic methods were not observable among experimentally produced pastry samples with and without allergenic components, although differences were observed among commercial samples. The important value of the study is certainly the differences found in the application of different QD conjugates (525, 585, and 655). The highest contrast was found in the application of 585 QD conjugates that can serve for the possible quantification of present food allergens—peanuts and wheat. The study clearly emphasized that QD can be used for the qualitative detection of food allergens and can represent a reliable analytical method for food allergen detection in different food matrixes.

The study aimed to verify whether the addition of selected herbs and spices will affect the content of polyphenols in biscuits and their antioxidant capacity, as well as what impact it will have on their sensory properties and attractiveness to consumers. Ground cloves, cinnamon, mint, and grape flour were added to the biscuits in concentrations of 1.0, 3.0, 5.0, and 10.0%. The total content of polyphenols in spices and biscuit samples was determined using the Folin–Ciocalteau solution and, subsequently, the antioxidant capacity was measured by FRAP (ferric ion reducing antioxidant power) and DPPH (2,2-diphenyl-1-picrylhydrazyl inhibition). Polyphenols were transferred through spices and herbs into the biscuits in all samples and thus their antioxidant capacity was increased. The antioxidant capacity of the control sample measured by the DPPH method was 15.41%, and by the FRAP method 1.02 μmol Trolox/g. There was an increase in antioxidant capacity in all samples with the addition of spices and herbs. The highest increase was recorded in the sample with cloves, namely with the addition of 10% of cloves there was an increase measured by the DPPH method to 92.6% and by the FRAP method to 208.42 μmol Trolox/g. This also corresponds to the measured TPC (Total Polyphenol Content) in the pure clove, which was 219.09 mg GAE/g, and in the samples where the content gradually grew up to 4.51 mg GAE/g in the sample with the addition of 10%, while the polyphenol content of the control sample was 0.2 mg GAE/g. For other parameters, changes were also observed, depending on the addition of spices/herbs. There was a reduction in both texture parameters, hardness and fracturability, depending on the addition of spices/herbs, which was confirmed by both instrumental measurements and sensory analysis. Colour measurements clearly separated the control from the fortified samples, thus confirming the colour changes. The addition of grape flour shows the smallest difference from the control when the overall impression does not change with the addition. In terms of the combination of increased antioxidant capacity and overall consumer acceptability, the addition of cloves at a concentration of 3.0% appears to be the best option.