Phase transitions can be used to alter the properties of a material without adding any additional atoms and are therefore of significant technological value. In a solid, phase transitions involve collective atomic displacements, but such atomic processes have so far only been investigated using macroscopic approaches. Here, we show that in situ scanning transmission electron microscopy can be used to follow the structural transformation between semiconducting (2H) and metallic (1T) phases in single-layered MoS2, with atomic resolution. The 2H/1T phase transition involves gliding atomic planes of sulphur and/or molybdenum and requires an intermediate phase (α-phase) as a precursor. The migration of two kinds of boundaries (β- and γ-boundaries) is also found to be responsible for the growth of the second phase. Furthermore, we show that areas of the 1T phase can be controllably grown in a layer of the 2H phase using an electron beam.

Surface contamination by polymer residues has long been a critical problem in probing graphene's intrinsic properties and in using graphene for unique applications in surface chemistry, biotechnology, and ultrahigh speed electronics. Poly(methyl methacrylate) (PMMA) is a macromolecule commonly used for graphene transfer and device processing, leaving a thin layer of residue to be empirically cleaned by annealing. Here we report on a systematic study of PMMA decomposition on graphene and of its impact on graphene's intrinsic properties using transmission electron microscopy (TEM) in combination with Raman spectroscopy. TEM images revealed that the physisorbed PMMA proceeds in two steps of weight loss in annealing and cannot be removed entirely at a graphene susceptible temperature before breaking. Raman analysis shows a remarkable blue-shift of the 2D mode after annealing, implying an anneal-induced band structure modulation in graphene with defects. Calculations using density functional theory show that local rehybridization of carbons from sp(2) to sp(3) on graphene defects may occur in the random scission of polymer chains and account for the blue-shift of the Raman 2D mode.

*Correspondence to: edman.tsang@chem.ox.ac.uk.The conversion of oxygen-rich biomass into hydrocarbon fuels requires efficient hydro-deoxygenation catalysts during the upgrading process. However, traditionally prepared Co-MoS 2 catalysts, although efficient for hydro-desulfurisation, are not appropriate due to their poor activity, sulfur loss and rapid deactivation at elevated temperature. Here, we report the synthesis of MoS 2 monolayer sheets decorated with isolated Co atoms through covalent bonding of Co to sulfur vacancies on the basal planes that, when compared to conventionally prepared samples, exhibit superior activity, selectivity and stability for the hydro-deoxygenation of 4-methylphenol to toluene. The higher activity, allows the reaction temperature to be reduced from the typically used 300 o C to 180 o C and thus allows the catalysis to proceed without sulfur loss and deactivation. Experimental analysis and density functional theory calculations reveal a large number of sites at the interface between the Co and Mo atoms on the MoS 2 basal surface and we ascribe the higher activity to the presence of sulfur vacancies that are created local to the observed Co-S-Mo interfacial sites.

Here we show that gas-phase doping by means of NH3 plasma exposure is a highly flexible and manufacturable process for graphene electronics. The nitrogen-containing radicals can readily form covalent bonds with the carbon lattice and keep stable in the postannealing for damage restoration. The amount of charge transfer can be fine tuned by controlling the exposure time and monitored by the systematic shift in the Raman G mode and the Gds−Vg curves in transport measurements. The maximum doping level can reach 1.5×1013 cm−2.

Rhenium disulfide (ReS2) and diselenide (ReSe2), the group 7 transition metal dichalcogenides (TMDs), are known to have a layered atomic structure showing an in-plane motif of diamond-shaped-chains (DS-chains) arranged in parallel. Using a combination of transmission electron microscopy and transport measurements, we demonstrate here the direct correlation of electron transport anisotropy in single-layered ReS2 with the atomic orientation of the DS-chains, as also supported by our density functional theory calculations. We further show that the direction of conducting channels in ReS2 and ReSe2 can be controlled by electron beam irradiation at elevated temperatures and follows the strain induced to the sample. Furthermore, high chalcogen deficiency can induce a structural transformation to a nonstoichiometric phase, which is again strongly direction-dependent. This tunable in-plane transport behavior opens up great avenues for creating nanoelectronic circuits in 2D materials.

Fabrication of large-area clean graphene sheets is the first step toward the development of high-performance applications in surface chemistry and biotechnology as well as in high-mobility electronics. Here we demonstrate the clean transfer of graphene grown by chemical vapor deposition on Cu foil, with surface cleanness defined by transmission electron microscopy (TEM) in combination with Raman scattering on the same position of suspended graphene sheets. For clean graphene, the Raman spectra exhibit distinctive features that can explicitly discriminate from that of graphene covered with a thin layer of amorphous carbon such as residual poly(methyl methacrylate) (PMMA). By applying this technique to graphene sheets with various degrees of surface cleanness, we show that the quantitative characterization of the thickness of surface contaminants is possible based on multiple reflections and interference of light in samples.

Single-layered MoS2 doped with Re (n-type) and Au (p-type) are investigated by in situ scanning transmission electron microscopy. Re atoms substituting Mo sites enhance the local chemical affinity, evidenced by agglomeration of other dopant/impurity atoms. Au atoms exist as adatoms and show larger mobility under the electron beam. These behaviors are consistent with density functional theory calculations.

Bilayer graphene is an intriguing material in that its electronic structure can be altered by changing the stacking order or the relative twist angle, yielding a new class of low-dimensional carbon system. Twisted bilayer graphene can be obtained by (i) thermal decomposition of SiC; (ii) chemical vapor deposition (CVD) on metal catalysts; (iii) folding graphene; or (iv) stacking graphene layers one atop the other, the latter of which suffers from interlayer contamination. Existing synthesis protocols, however, usually result in graphene with polycrystalline structures. The present study investigates bilayer graphene grown by ambient pressure CVD on polycrystalline Cu. Controlling the nucleation in early stage growth allows the constituent layers to form single hexagonal crystals. New Raman active modes are shown to result from the twist, with the angle determined by transmission electron microscopy. The successful growth of single-crystal bilayer graphene provides an attractive jumping-off point for systematic studies of interlayer coupling in misoriented few-layer graphene systems with well-defined geometry.