A dual-band dual-mode button antenna for body centric communications is presented. At the lower band, a spiral inverted-F antenna is designed with omnidirectional radiation pattern for on-body communication. At the upper band, the high-order mode of the inverted-F antenna is utilized together with a metal reflector to realize broadside radiation for off-body communication. For demonstration, a prototype is implemented. The measured peak gains on the phantom at the lower and upper bands are -0.6 and 4.3 dBi, respectively. The antenna operating on the phantom has measured efficiencies of 46.3% at the lower band and 69.3% at the upper band. The issue of specific absorption rate (SAR) is studied. The maximum transmitted power under the SAR regulation of 1.6 W/kg is found to be 26.4 dB·m, which is high enough for body centric communications. In addition, the transmission performance between two proposed antennas mounted on the body is investigated by measuring the transmission loss. With an overall miniaturized size, the robust button antenna could be integrated in clothes and be a potential candidate for wireless body area network applications.

The design of a simple planar polarization reconfigurable monopole antenna for the Global Navigation Satellite System (GNSS) and Personal Communications System (PCS) is presented. The antenna consists of two meandered monopoles, a feeding network using the Wilkinson power divider, two switchable 90 -phase shifters implemented using -microstrip lines and a defected ground structure (DGS). The meandered monopoles resonating at about 1.55 GHz are placed perpendicular to each other. The input signal is divided into two signals with equal amplitude and phase by the power divider and fed to the meandered monopoles via the phase shifters. The two signals arriving at the two monopoles have a phase difference of 90 , or 0 , depending on the phase shifters controlled using six PIN-diode switches, hence generating a right/left-handed circularly polarized (CP) or linearly polarized (LP) signal. We propose a novel biasing technique to control the six PIN diodes using five voltages. Measurement results show that the antenna in CP has an impedance bandwidth of 1.06-1.64 GHz and an axial-ratio bandwidth of 1.43-1.84 GHz, and in LP has an impedance bandwidth of 1.63-1.88 GHz. Simulated and measured results on S11, AR, radiation pattern, and gains show good agreements.

No abstract

No abstract

No abstract

No abstract

No abstract

This paper presents a compact dual-band ±45 • dual-polarized base-station array based on embedded filtering elements. The proposed antenna array consists of 9 dual-band antenna units, which operate at the lower band (LB) of 790-862 MHz and the higher band (HB) of 880-960 MHz with a small frequency spacing. In each unit, one antenna element is embedded into the other one, featuring a very compact size. To alleviate the serious cross-band mutual coupling between the two elements, the LB patch antenna generates a boresight radiation null at its higher band edge, and the HB element is designed with a band-stop response at its lower band edge. In this way, high cross-band isolation between the two embedded elements can be obtained. For demonstration, a compact dual-band ±45 • dual-polarized filtering antenna array with 9 units is designed and fabricated to fit the specification of LB and HB bands (|S 11 | < −15 dB). The overall width of the array is only 280 mm, which is much narrower than that of typical industrial products using two side-by-side sub-arrays (∼576 mm). The measured performance of the antenna array can meet the requirement of base stations. INDEX TERMS Base-station antenna array, filtering antenna, dual band, mutual coupling reduction, compact size.