In the era of technological advancements, security systems are not only required to provide safe conditions but also provide easy access, monitors and remote control. Room insecurity such as theft or fire cases can occur especially in rooms that are not equipped with security systems and special safeguards. Based on this, it is necessary to develop a security system that can be accessed and monitored remotely and provides early warning of early indications of danger through a smartphone. System development is done through the stages of making software and hardware. The hardware consists of Arduino Mega 2560 to regulate the system, MySQL Server Database, CC3000 Wi-Fi Shield as a communication device between Arduino and the server, Limit Switch to detect forced push on the door, MQ-2 measures the presence of indoor gas leak, sensor DHT-11 to measure room temperature, the camera is VC0706 to capture images in the door area. Android application as a system interface to change key status and monitor the condition of the room. A warning notification of the gas leak danger indication is sent to the user's smartphone by displaying the gas content value. A warning message has a forced push on the door equipped with a feature to display the camera capture results. The final result of this research is that a room security system has been successfully established where door lock access and room monitoring can be done through an android application installed on a smartphone. The system can provide hazard warning messages properly.
Patients with arrhythmia symptoms must undergo a healthy lifestyle and routinely conduct consultations and heart rate control with the doctor. The most important thing about this is the integrated health monitoring tool. In this study a portable heart rate monitoring tool is proposed for patients at risk of low-cost IoT-based with SMS alert system utilizing the OpenSID database. . Module ESP8266 Wi-Fi is used to communicate the web server gateway and pulse sensor to detect the heart rate which converted to Bit per Minute (BPM). Heart rate data is saved to the database server using TCP IP communications. Patients and doctors can see heart rate information trough the website in real-time. Alert system will send notification information via short message service (SMS ) to doctors, person in charge and family if heart rate below 60 BPM and above 100 BPM. the time needed for sending SMS is about 7 to 8 seconds. Test results show the whole system is running well. This tool is expected can accompany the risk patients do their activities safely and both doctors and families easier to supervise the patients.
Website sekolah saat ini tengah menjadi trend di dunia pendidikan dan website memperoleh perhatian, tanggapan yang sangat bagus dari berbagai pihak baik dari tenaga kependidikan, siswa serta masyarakat. Website sekolah adalah website yang khusus diperuntukkan untuk instansi sekolah. Website ini bisa digunakan sebagai media siswa-siswi dalam mencari informasi seputar sekolah maupun sebagai salah satu sarana pendukung kegiatan belajar mengajar. Sekolah Menengah Kejuruan (SMK) Dhuafa Padang adalah salah satu sekolah kejuruan di Kota Padang yang menyediakan pendidikan gratis bagi siswanya. Saat ini SMK Dhuafa Padang belum memiliki website sekolah. Oleh karena itu tim pelaksana melakukan pengabdian dengan membuatkan sebuah website sekolah serta melaksanakan pelatihan tata kelola website. Pelaksanaan pengabdian terdiri atas dua tahap kegiatan yaitu pembuatan website sekolah SMK Dhuafa Padang dan pelaksanaan bimbingan teknis pengelolaan website sekolah. Setelah pelaksanaan pengabdian, SMK Dhuafa Padang telah memiliki sebuah website sekolah yang dapat menjadi sarana promosi sekolah bagi masyarakat. Website dapat diakses pada alamat https://smkdhuafapadang.sch.id.
Keberadaan sistem minimum berbasis mikrokontroler dapat digunakan untuk sistem penguncian bertingkat melalui pabrikasi dan perakitan untuk keterwujudan sebuah purwarupa perangkat tertanam berbasis chip mikrokontroler AVR ATmega2560 dan modul Radio Frequency Identification (RFID). Penetapan sasaran penelitian dilakukan setelah tahapan perancangan dan pembuatan perangkat tertanam, yaitu membuat motherboard mini dan mengintegrasikan sejumlah perangkat elektronika dan memrogram sistem mikrokontroler. Sasaran penelitian, yaitu melaksanakan uji verifikasi berupa simulasi dan melakukan uji validasi berupa pengukuran kinerja terhadap purwarupa perangkat tertanam. Metode penelitian dilaksanakan dengan pentahapan, yaitu simulasi dilaksanakan dengan bantuan aplikasi Proteus dan pengukuran kinerja dilaksanakan dengan tahapan sesuai urutan pada simulasi. Hasil penelitian berupa simulasi dalam bentuk pemberian 4 (empat) kondisi buatan dan pengukuran kinerja dilakukan juga dalam bentuk pemberian 4 (empat), tetapi dengan kondisi sesungguhnya. Kesimpulan utama penelitian ini berkaitan dengan saat uji verifikasi dan validasi. Pemaksimalan terhadap uji verifikasi wajib ditindaklanjuti dengan uji validasi. Pertama, ketika kartu tidak terdeteksi modul RFID, ketika kartu terdeteksi modul RFID, ketika sistem penguncian dibuka secara paksa dan buzzer “ON”. Kedua, ketika kartu tidak terdeteksi saat di tag pada antena dan ketika sistem penguncian dibuka secara paksa dan buzzer “ON”, dan kartu terdeteksi saat di tag pada antena.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.