Water adsorption in porous materials is important for many applications such as dehumidification, thermal batteries, and delivery of drinking water in remote areas. In this study, we have identified three criteria for achieving high performing porous materials for water adsorption. These criteria deal with condensation pressure of water in the pores, uptake capacity, and recyclability and water stability of the material. In search of an excellently performing porous material, we have studied and compared the water adsorption properties of 23 materials, 20 of which are metal-organic frameworks (MOFs). Among the MOFs are 10 zirconium(IV) MOFs with a subset of these, MOF-801-SC (single crystal form), -802, -805, -806, -808, -812, and -841 reported for the first time. MOF-801-P (microcrystalline powder form) was reported earlier and studied here for its water adsorption properties. MOF-812 was only made and structurally characterized but not examined for water adsorption because it is a byproduct of MOF-841 synthesis. All the new zirconium MOFs are made from the Zr6O4(OH)4(-CO2)n secondary building units (n = 6, 8, 10, or 12) and variously shaped carboxyl organic linkers to make extended porous frameworks. The permanent porosity of all 23 materials was confirmed and their water adsorption measured to reveal that MOF-801-P and MOF-841 are the highest performers based on the three criteria stated above; they are water stable, do not lose capacity after five adsorption/desorption cycles, and are easily regenerated at room temperature. An X-ray single-crystal study and a powder neutron diffraction study reveal the position of the water adsorption sites in MOF-801 and highlight the importance of the intermolecular interaction between adsorbed water molecules within the pores.

Conversion of carbon dioxide (CO2) to carbon monoxide (CO) and other value-added carbon products is an important challenge for clean energy research. Here we report modular optimization of covalent organic frameworks (COFs), in which the building units are cobalt porphyrin catalysts linked by organic struts through imine bonds, to prepare a catalytic material for aqueous electrochemical reduction of CO2 to CO. The catalysts exhibit high Faradaic efficiency (90%) and turnover numbers (up to 290,000, with initial turnover frequency of 9400 hour(-1)) at pH 7 with an overpotential of -0.55 volts, equivalent to a 26-fold improvement in activity compared with the molecular cobalt complex, with no degradation over 24 hours. X-ray absorption data reveal the influence of the COF environment on the electronic structure of the catalytic cobalt centers.

No abstract

Superacids, defined as acids with a Hammett acidity function H0 ≤ -12, are useful materials, but a need exists for new, designable solid state systems. Here, we report superacidity in a sulfated metal-organic framework (MOF) obtained by treating the microcrystalline form of MOF-808 [MOF-808-P: Zr6O5(OH)3(BTC)2(HCOO)5(H2O)2, BTC = 1,3,5-benzenetricarboxylate] with aqueous sulfuric acid to generate its sulfated analogue, MOF-808-2.5SO4 [Zr6O5(OH)3(BTC)2(SO4)2.5(H2O)2.5]. This material has a Hammett acidity function H0 ≤ -14.5 and is thus identified as a superacid, providing the first evidence for superacidity in MOFs. The superacidity is attributed to the presence of zirconium-bound sulfate groups structurally characterized using single-crystal X-ray diffraction analysis.

The high porosity of metal-organic frameworks (MOFs) has been used to achieve exceptional gas adsorptive properties but as yet remains largely unexplored for electrochemical energy storage devices. This study shows that MOFs made as nanocrystals (nMOFs) can be doped with graphene and successfully incorporated into devices to function as supercapacitors. A series of 23 different nMOFs with multiple organic functionalities and metal ions, differing pore sizes and shapes, discrete and infinite metal oxide backbones, large and small nanocrystals, and a variety of structure types have been prepared and examined. Several members of this series give high capacitance; in particular, a zirconium MOF exhibits exceptionally high capacitance. It has the stack and areal capacitance of 0.64 and 5.09 mF cm(-2), about 6 times that of the supercapacitors made from the benchmark commercial activated carbon materials and a performance that is preserved over at least 10000 charge/discharge cycles.

The crystal structure of a new covalent organic framework, termed COF-320, is determined by single-crystal 3D electron diffraction using the rotation electron diffraction (RED) method for data collection. The COF crystals are prepared by an imine condensation of tetra-(4-anilyl)methane and 4,4'-biphenyldialdehyde in 1,4-dioxane at 120 °C to produce a highly porous 9-fold interwoven diamond net. COF-320 exhibits permanent porosity with a Langmuir surface area of 2400 m(2)/g and a methane total uptake of 15.0 wt % (176 cm(3)/cm(3)) at 25 °C and 80 bar. The successful determination of the structure of COF-320 directly from single-crystal samples is an important advance in the development of COF chemistry.

Preorganization in a covalent organic framework leads to the generation of a more conductive mixed-valence state upon doping.

The separation of ethane from ethylene is of prime importance in the purification of chemical feedstocks for industrial manufacturing. However, differentiating these compounds is notoriously difficult due to their similar physicochemical properties. High-performance porous adsorbents provide a solution. Conventional adsorbents trap ethylene in preference to ethane, but this incurs multiple steps in separation processes. Alternatively, high-purity ethylene can be obtained in a single step if the adsorbent preferentially adsorbs ethane over ethylene. We herein report a metal−organic framework, MUF-15 (MUF, Massey University Framework), constructed from inexpensive precursors that sequesters ethane from ethane/ethylene mixtures. The productivity of this material is exceptional: 1 kg of MOF produces 14 L of polymer-grade ethylene gas in a single adsorption step starting from an equimolar ethane/ethylene mixture. Computational simulations illustrate the underlying mechanism of guest adsorption. The separation performance was assessed by measuring multicomponent breakthrough curves, which illustrate that the separation performance is maintained over a wide range of feed compositions and operating pressures. MUF-15 is robust, maintains its performance in the presence of acetylene, and is easily regenerated by purging with inert gas or by placing under reduced pressure.