A series of five thermally and chemically stable functionalized covalent organic frameworks (COFs), namely, TpPa-NO2, TpPa-F4, TpBD-(NO2)2, TpBD-Me2, and TpBD-(OMe)2 were synthesized by employing the solvothermal aldehyde-amine Schiff base condensation reaction. In order to complete the series, previously reported TpPa-1, TpPa-2, and TpBD have also been synthesized, and altogether, eight COFs were fully characterized through powder X-ray diffraction (PXRD), Fourier transform IR (FT-IR) spectroscopy, (13)C solid-state NMR spectroscopy, and thermogravimetric analysis. These COFs are crystalline, permanently porous, and stable in boiling water, acid (9 N HCl), and base (3 N NaOH). The synthesized COFs (all eight) were successfully delaminated using a simple, safe, and environmentally friendly mechanical grinding route to transform into covalent organic nanosheets (CONs) and were well characterized via transmission electron microscopy and atomic force microscopy. Further PXRD and FT-IR analyses confirm that these CONs retain their structural integrity throughout the delamination process and also remain stable in aqueous, acidic, and basic media like the parent COFs. These exfoliated CONs have graphene-like layered morphology (delaminated layers), unlike the COFs from which they were synthesized.
Two new chemically stable functional crystalline covalent organic frameworkds (COFs) (Tp-Azo and Tp-Stb) were synthesized using the Schiff base reaction between triformylphloroglucinol (Tp) and 4,4'-azodianiline (Azo) or 4,4'-diaminostilbene (Stb), respectively. Both COFs show the expected keto-enamine form, and high stability toward boiling water, strong acidic, and basic media. H3PO4 doping in Tp-Azo leads to immobilization of the acid within the porous framework, which facilitates proton conduction in both the hydrous (σ = 9.9 × 10(-4) S cm(-1)) and anhydrous state (σ = 6.7 × 10(-5) S cm(-1)). This report constitutes the first emergence of COFs as proton conducting materials.
Storage of pure CO2 and CH4 and separation of their binary mixture in three different classes of nanostructured adsorbents--silicalite, C168 schwarzite, and IRMOF-1--have been compared at room temperature using atomistic simulation. CH4 is represented as a spherical Lennard-Jones molecule, and CO2 is represented as a rigid linear molecule with a quadrupole moment. For pure component adsorption, CO2 is preferentially adsorbed than CH4 in all the three adsorbents over the pressure range under this study, except in C168 schwarzite at high pressures. The simulated adsorption isotherms and isosteric heats match closely with available experimental data. A dual-site Langmuir-Freundlich equation is used to fit the isotherms satisfactorily. Compared to silicalite and C168 schwarzite, the gravimetric adsorption capacity of pure CH4 and CO2 separately in IRMOF-1 is substantially larger. This implies that IRMOF-1 might be a potential storage medium for CH4 and CO2. For adsorption from an equimolar binary mixture, CO2 is preferentially adsorbed in all three adsorbents. Predictions of mixture adsorption with the ideal-adsorbed solution theory on the basis of only pure component adsorption agree well with simulation results. Though IRMOF-1 has a significantly higher adsorption capacity than silicalite and C168 schwarzite, the adsorption selectivity of CO2 over CH4 is found to be similar in all three adsorbents.
The separation of ethane from ethylene is of prime importance in the purification of chemical feedstocks for industrial manufacturing. However, differentiating these compounds is notoriously difficult due to their similar physicochemical properties. High-performance porous adsorbents provide a solution. Conventional adsorbents trap ethylene in preference to ethane, but this incurs multiple steps in separation processes. Alternatively, high-purity ethylene can be obtained in a single step if the adsorbent preferentially adsorbs ethane over ethylene. We herein report a metal−organic framework, MUF-15 (MUF, Massey University Framework), constructed from inexpensive precursors that sequesters ethane from ethane/ethylene mixtures. The productivity of this material is exceptional: 1 kg of MOF produces 14 L of polymer-grade ethylene gas in a single adsorption step starting from an equimolar ethane/ethylene mixture. Computational simulations illustrate the underlying mechanism of guest adsorption. The separation performance was assessed by measuring multicomponent breakthrough curves, which illustrate that the separation performance is maintained over a wide range of feed compositions and operating pressures. MUF-15 is robust, maintains its performance in the presence of acetylene, and is easily regenerated by purging with inert gas or by placing under reduced pressure.
We report a molecular simulation study for the separation of industrially important gas mixtures (CO(2)/H(2), CO(2)/CH(4), and CO(2)/N(2)) in rho zeolite-like metal-organic framework (rho-ZMOF). Rho-ZMOF contains a wide-open anionic framework and charge-balancing extraframework Na(+) ions. Two types of binding sites for Na(+) ions are identified in the framework. Site I is in the single eight-membered ring, whereas site II is in the alpha-cage. Na(+) ions at site I have a stronger affinity for the framework and thus a smaller mobility. The binding sites in rho-ZMOF resemble those in its inorganic counterpart rho-zeolite. CO(2) is adsorbed predominantly over other gases because of its strong electrostatic interactions with the charged framework and the presence of Na(+) ions acting as additional adsorption sites. At ambient temperature and pressure, the CO(2) selectivities are 1800 for the CO(2)/H(2) mixture, 80 for the CO(2)/CH(4) mixture, and 500 for the CO(2)/N(2) mixture. Compared with other MOFs and nanoporous materials reported to date, rho-ZMOF exhibits unprecedentedly high selective adsorption for these gas mixtures. This work represents the first simulation study to characterize extraframework ions and examine gas separation in a charged ZMOF. The simulation results reveal that rho-ZMOF is a promising candidate for the separation of syngas, natural gas, and flue gas.
We report a molecular simulation study for CO2 storage in metal-organic frameworks (MOFs). As compared to the aluminum-free and cation-exchanged ZSM-5 zeolites and carbon nanotube bundle, IRMOF1 exhibits remarkably higher capacity. Incorporation of Na(+) cations into zeolite increases the capacity only at low pressures. By variation of the metal oxide, organic linker, functional group, and framework topology, a series of isoreticular MOFs (IRMOF1, Mg-IRMOF1, Be-IRMOF1, IRMOF1-(NH2)4, IRMOF10, IRMOF13, and IRMOF14) are systematically examined, as well as UMCM-1, a fluorous MOF (F-MOF1), and a covalent-organic framework (COF102). The affinity with CO2 is enhanced by addition of a functional group, and the constricted pore is formed by interpenetration of the framework; both lead to a larger isosteric heat and Henry's constant and subsequently a stronger adsorption at low pressures. The organic linker plays a critical role in tuning the free volume and accessible surface area and largely determines CO2 adsorption at high pressures. As a combination of high capacity and low framework density, IRMOF10, IRMOF14, and UMCM-1 are identified from this study to be the best for CO2 storage, even surpass the experimentally reported highest capacity in MOF-177. COF102 is a promising candidate with high capacity at considerably low pressures. Both gravimetric and volumetric capacities at 30 bar correlate well with the framework density, free volume, porosity, and accessible surface area. These structure-function correlations are useful for a priori prediction of CO2 capacity and for the rational screening of MOFs toward high-efficacy CO2 storage.
Defect concentrations and their compensating groups have been systematically tuned within UiO-66 frameworks by using modified microwave-assisted solvothermal methods. Both of these factors have a pronounced effect on CO2 and H2O adsorption at low and high pressure.
Efficient and sustainable methods for carbon dioxide capture are highly sought after. Mature technologies involve chemical reactions that absorb CO2, but they have many drawbacks. Energy-efficient alternatives may be realised by porous physisorbents with void spaces that are complementary in size and electrostatic potential to molecular CO2. Here, we present a robust, recyclable and inexpensive adsorbent termed MUF-16. This metal-organic framework captures CO2 with a high affinity in its one-dimensional channels, as determined by adsorption isotherms, X-ray crystallography and density-functional theory calculations. Its low affinity for other competing gases delivers high selectivity for the adsorption of CO2 over methane, acetylene, ethylene, ethane, propylene and propane. For equimolar mixtures of CO2/CH4 and CO2/C2H2, the selectivity is 6690 and 510, respectively. Breakthrough gas separations under dynamic conditions benefit from short time lags in the elution of the weakly-adsorbed component to deliver high-purity hydrocarbon products, including pure methane and acetylene.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.