is greatly decreased or even eliminated. For instance, the widely used cyanoacrylate adhesives exhibit strong adhesion in air, but when applied in water environment, they are hardened quickly to form a layer of stiff plastics, eventually resulting in the loss of adhesion. [9] The commercially available epoxy resins [10] and polyurethanes [11] are reported to demonstrate strong underwater adhesion, but long time of curing is usually required. Recently, host-guest chemistry strategy was reportedly employed to prepare underwater adhesives; however, the substrate surface needs to be modified in advance. [5,12] In addition, electrostatic and hydrophobic interactions were also proved to contribute to enhanced underwater adhesion, but the adhesion strength was relatively poor. [13,14] In nature, many organisms, such as mussels, barnacles, and castle worms, have evolved an unparalleled mechanism to perfectly tackle the underwater adhesion problem. [15][16][17] The finding of universality of catechol chemistry for wet adhesion has provided a valuable biomimetic source to develop diverse adhesives for use in aqueous environments. However, several problems, such as the complexity of administration, release of harmful organic solvents, [18,19] long-term curing, [2] need for oxidant addition, [20,21] and low adhesion strength, [18,22] may hamper the actual applications of these bioinspired adhesives. Although numerous dopamine-based adhesives have been reported and shown to bond various material surfaces, strong adhesion in water and particularly blood environment, remains nonexistent so far.Increasing studies on bioadhesives secreted by molluscs and insects have suggested that liquid coacervation plays a critical role in achieving underwater adhesion. [13] In this process, phase separation and concurrently increased hydrophobicity induced by coacervation can dispel the hydrated water on the interface, leading to much enhanced interaction of adhesive groups with the adherent and thus stable underwater adhesion. Up to date, several complex coacervate adhesives with linear structure have been reported, but the occurrence of those coacervations in water needs external triggers, such as temperature, [13] pH, [20,23] and iron strength. [24] Compared to linear counterparts, hyperbranched polymer (HBP) has a unique highly branched Despite recent advance in bioinspired adhesives, achieving strong adhesion and sealing hemostasis in aqueous and blood environments is challenging. A hyperbranched polymer (HBP) with a hydrophobic backbone and hydrophilic adhesive catechol side branches is designed and synthesized based on Michael addition reaction of multi-vinyl monomers with dopamine.It is demonstrated that upon contacting water, the hydrophobic chains selfaggregate to form coacervates quickly, displacing water molecules on the adherent surface to trigger increased exposure of catechol groups and thus rapidly strong adhesion to diverse materials from low surface energy to high energy in various environments, such as deionized water, sea ...
The emerging 3D printing technique allows for tailoring hydrogel‐based soft structure tissue scaffolds for individualized therapy of osteochondral defects. However, the weak mechanical strength and uncontrollable swelling intrinsic to conventional hydrogels restrain their use as bioinks. Here, a high‐strength thermoresponsive supramolecular copolymer hydrogel is synthesized by one‐step copolymerization of dual hydrogen bonding monomers, N‐acryloyl glycinamide, and N‐[tris(hydroxymethyl)methyl] acrylamide. The obtained copolymer hydrogels demonstrate excellent mechanical properties—robust tensile strength (up to 0.41 MPa), large stretchability (up to 860%), and high compressive strength (up to 8.4 MPa). The rapid thermoreversible gel ⇔ sol transition behavior makes this copolymer hydrogel suitable for direct 3D printing. Successful preparation of 3D‐printed biohybrid gradient hydrogel scaffolds is demonstrated with controllable 3D architecture, owing to shear thinning property which allows continuous extrusion through a needle and also immediate gelation of fluid upon deposition on the cooled substrate. Furthermore, this biohybrid gradient hydrogel scaffold printed with transforming growth factor beta 1 and β‐tricalciumphosphate on distinct layers facilitates the attachment, spreading, and chondrogenic and osteogenic differentiation of human bone marrow stem cells (hBMSCs) in vitro. The in vivo experiments reveal that the 3D‐printed biohybrid gradient hydrogel scaffolds significantly accelerate simultaneous regeneration of cartilage and subchondral bone in a rat model.
The high locoregional breast cancer recurrence rate poses a significant risk for patients' survival. Injecting theranostic drugs‐laden soft tissue‐like hydrogels into the resected breast cavity is a promising strategy to achieve both precisely local therapy of breast cancer and reconstructive mammoplasty. In this work, a robust injectable thermoresponsive supramolecular poly(N‐acryloyl glycinamide‐co‐acrylamide) (PNAm) hydrogel bearing polydopamine (PDA) coated‐gold nanoparticles (AuNPs) and doxorubicin (DOX) is fabricated. The supramolecular polymer nanocomposite (SPN) hydrogels exhibit an excellent photothermal effect arising from PDA‐AuNPs that are tightly fixed to the hydrogel matrix via PDA and amide moieties in the network, built‐in near infrared (NIR) light‐triggered gel–sol transition as well as tunable drug delivery. The PNAm‐PDAAu‐DOX sol driven by prior heating is injected into the cavity of resected cancerous breasts of rats where gelation occurred rapidly while the temperature decreased to body temperature, thereby finely serving as a breast filler. During 4 week of implantation, interval NIR light irradiation can mediate photothermal effect and concertedly controllable DOX release, thus collectively preventing the recurrence of breast cancer. Remarkably, this stable remoldable SPN hydrogel facilitates the breast reconstruction and can be tracked by computed tomography (CT) imaging owing to the intrinsic X‐ray attenuation property of the loaded AuNPs.
Self-assembled nanofibers are ubiquitous in nature and serve as inspiration for the design of supramolecular hydrogels. A multicomponent approach offers the possibility of enhancing the tunability and functionality of this class of materials. We report on the synergistic multicomponent self-assembly involving a peptide amphiphile (PA) and a 1,3:2,4-dibenzylidene-d-sorbitol (DBS) gelator to generate hydrogels with tunable nanoscale morphology, improved stiffness, enhanced self-healing, and stability to enzymatic degradation. Using induced circular dichroism of Thioflavin T (ThT), electron microscopy, small-angle neutron scattering, and molecular dynamics approaches, we confirm that the PA undergoes self-sorting, while the DBS gelator acts as an additive modifier for the PA nanofibers. The supramolecular interactions between the PA and DBS gelators result in improved bulk properties and cytocompatibility of the two-component hydrogels as compared to those of the single-component systems. The tunable mechanical properties, self-healing ability, resistance to proteolysis, and biocompatibility of the hydrogels suggest future opportunities for the hydrogels as scaffolds for tissue engineering and drug delivery vehicles.
Although antibiotics have been widely used in clinical applications to treat pathogenic infections at present, the problem of drug-resistance associated with abuse of antibiotics is becoming a potential threat to human beings. We report a biohybrid nanomaterial consisting of antibiotics, enzyme, polymers, hyaluronic acid (HA), and mesoporous silica nanoparticles (MSNs), which exhibits efficient in vitro and in vivo antibacterial activity with good biocompatibility and negligible hemolytic side effect. Herein, biocompatible layer-by-layer (LBL) coated MSNs are designed and crafted to release encapsulated antibiotics, e.g., amoxicillin (AMO), upon triggering with hyaluronidase, produced by various pathogenic Staphylococcus aureus (S. aureus). The LBL coating process comprises lysozyme (Lys), HA, and 1,2-ethanediamine (EDA)-modified polyglycerol methacrylate (PGMA). The Lys and cationic polymers provided multivalent interactions between MSN-Lys-HA-PGMA and bacterial membrane and accordingly immobilized the nanoparticles to facilitate the synergistic effect of these antibacterial agents. Loading process was characterized by dynamic light scattering (DLS), transmission electron microscopy (TEM), thermogravimetric analysis (TGA), and X-ray diffraction spectroscopy (XRD). The minimal inhibition concentration (MIC) of MSN-Lys-HA-PGMA treated to antibiotic resistant bacteria is much lower than that of isodose Lys and AMO. Especially, MSN-Lys-HA-PGMA exhibited good inhibition for pathogens in bacteria-infected wounds in vivo. Therefore, this type of new biohybrid nanomaterials showed great potential as novel antibacterial agents.
Wu YJ, Muldoon LL, Varallyay C, Markwardt S, Jones RE, Neuwelt EA. In vivo leukocyte labeling with intravenous ferumoxides/protamine sulfate complex and in vitro characterization for cellular magnetic resonance imaging. Am J Physiol Cell Physiol 293: C1698-C1708, 2007. First published September 26, 2007; doi:10.1152/ajpcell.00215.2007.-Cellular labeling with ferumoxides (Feridex IV) superparamagnetic iron oxide nanoparticles can be used to monitor cells in vivo by MRI. The objective of this study was to use histology and MRI to evaluate an in vivo, as opposed to in vitro, technique for labeling of mononuclear leukocytes as a means of tracking inflammatory processes in the brain. Long-Evans rats were intravenously injected with 20 mg/kg ferumoxides, ferumoxtran-10, or ferumoxytol with or without protamine sulfate. Leukocytes and splenocytes were evaluated by cell sorting and iron histochemistry or were implanted into the brain for MRI. Injection of ferumoxides/ protamine sulfate complex IV resulted in iron labeling of leukocytes (ranging from 7.4 Ϯ 0.5% to 12.5 Ϯ 0.9% with average 9.2 Ϯ 0.8%) compared with ferumoxides (ranging from 3.9 Ϯ 0.4% to 6.3 Ϯ 0.5% with average 5.0 Ϯ 0.5%) or protamine sulfate alone (ranging from 0% to 0.9 Ϯ 0.7% with average 0.3 Ϯ 0.3%). Cell sorting analysis indicated that iron-labeled cells were enriched for cell types positive for the myelomonocytic marker (CD11b/c) and the B lymphocyte marker (CD45RA) and depleted in the T cell marker (CD3). Neither ferumoxtran-10 nor ferumoxytol with protamine sulfate labeled leukocytes. In vivo ferumoxides/protamine sulfate-loaded leukocytes and splenocytes were detected by MRI after intracerebral injection. Ferumoxides/protamine complex labeled CD45RA-positive and CD11b/c-positive leukocytes in vivo without immediate toxicity. The dose of feumoxides in this report is much higher than the approved human dose, so additional animal studies are required before this approach could be translated to the clinic. These results might provide useful information for monitoring leukocyte trafficking into the brain. leukocyte trafficking; brain; B lymphocyte; rat SUPERPARAMAGNETIC IRON OXIDE (SPIO) and ultra-small SPIO (USPIO) nanoparticle agents, consisting of an iron oxide core with a variable carbohydrate coating, are gaining use for MRI.
There is an urgent need for developing novel strategies for bacterial detection and inhibition. Herein, a multifunctional nanomaterial based on mesoporous silica nanoparticles (MSNs) is designed, loaded with amoxicillin (AMO), and surface-coated with 1,2-ethanediamine (EDA)-modified polyglycerol methacrylate (PGEDA), cucurbit[7]uril (CB[7]), and tetraphenylethylene carboxylate derivatives (TPE-(COOH)) by the layer-by-layer (LbL) self-assembly technique. When bacteria contacts with this nanoassembly, the binding of anionic bacterial surface toward the cationic PGEDA layer of this material can reduce or break the interactions between PGEDA layer and TPE-(COOH) layer, leading to attenuated TPE-(COOH) emission due to the weakening of aggregation-induced emission (AIE) effect. Furthermore, upon adding adamantaneamine (AD), the more stable AD⊂CB[7] complex forms and PGEDA is liberated through competitive replacement, thus leading to the release of AMO and resulting in much higher antibacterial ability of this nanomaterial. This newly designed nanomaterial possesses dual functions of controllable antibacterial activity against Gram-positive Staphylococcus aureus and Gram-negative Escherichia coli, and bacterial detection ability in aqueous media, suggesting that the design of this multifunctional antibacterial material will provide a simple, effective, and rapid way to control the activity of antimicrobial and open up an alternative new avenue for bacterial detection and elimination.
Recently, there has been a high expectation that high water absorbent hydrogels can be developed as an artificial vitreous body. However, the drawbacks associated with in vivo instability, biofouling, uncontrollable in situ reaction time, and injection‐induced precrosslinked fragmentation preclude their genuine use as vitreous substitutes. Here, a supramolecular binary copolymer hydrogel termed as PNAGA‐PCBAA by copolymerization of N‐acryloyl glycinamide (NAGA) and carboxybetaine acrylamide (CBAA) is prepared. This PNAGA‐PCBAA hydrogel physically crosslinked by dual amide hydrogen bonds of NAGA exhibits an ultralow solid content (1.6, 98.4 wt% water content), and shear‐thinning behavior, body temperature extrudability/self‐healability, rapid network recoverability, and very close key parameters (modulus, antifouling/antifibrosis, light transmittance, refractive index, ultrastability) to human vitreous body. It is demonstrated that the hydrogel can be readily injected by a 22G needle into the rabbits' eyes where the gelling network is rapidly recovered. After 16 weeks postoperation, the hydrogel acts as a very stable vitreous substitute without affecting the structure of soft tissues in eye, or eliciting adverse effects. This supramolecular binary copolymer hydrogel finds a broad application in ophthalmic fields as not only a self‐recoverable permanent vitreous substitute, but also transient intraocular filling for prevention of inner tissues in postsurgical eyes.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.