Metal halide perovskites attract significant attention because of their excellent optoelectronic and semiconducting properties. However, there are environmental concerns related to the toxicity of the lead metal that is mainly used in these perovskites. PEA2SnI4 perovskite is a potential candidate for lead-free perovskites because of its pure red emission. Although, undesired Sn4+ oxidation results in the deterioration of PEA2SnI4 perovskite. We demonstrate the two-step crystallization of PEA2SnI4 through the (i) reprecipitation and (ii) recrystallization processes. A film prepared using this method exhibits narrowed emission, with a full width at half-maximum from 30.0 to 26.1 nm, because of its homogeneous emission. Moreover, the Sn4+ content of two-step-crystallized PEA2SnI4 films is five times lower than that of a control film. Diffusion-ordered spectroscopy analysis indicates that the two-step precursor exhibits a smaller hydrodynamic radius crystal seed, which enhances crystallization during spin coating. The resulting two-step crystallized PEA2SnI4-based light-emitting diode (LED) exhibits a maximum external quantum efficiency (EQE) of 0.4% with an average of 0.2%, which is two times greater than that of the control device. This two-step approach may be generalized to synthesize other lead-free materials.

The characterization of photoexcited electrons on the surface of nanomaterial remains challenging. Herein, laser excitation mass spectrometry combined with a chemical thermometer and electron acceptor has been developed to characterize the energetics and population density of photoexcited electrons transferred from gold nanoparticles (AuNPs). In contrast to laser fluence and bias voltage, the hot spots of closely packed AuNPs play a more significant role in enhancing the average energetics of photoexcited electrons, which can be harvested effectively by the electron acceptor. By harvesting more energetic photoexcited electrons for the desorption and ionization process, it is anticipated that the sensitive detection of biomarkers can be achieved, which is beneficial to metabolomic studies and early disease diagnosis.

No abstract

Perovskite quantum dots (PQDs) are applicable in light-emitting diodes (LEDs) owing to their color tunability, high color purity, and excellent photoluminescence quantum yield (PLQY) in the solution state. However, a PQD film obtained through nonradiative recombination by concentration quenching and the formation of surface defects exhibited a low PLQY. In this study, we focused on the energy transfer between PQDs with different energy gaps (E g ) to reduce nonradiative recombination in the film state and consequently achieve high device performance. We prepared size-controlled PQDs measuring 10.7 nm (large-size QD; LQD) and 7.9 nm (small-size QD; SQD) with different E g values and observed a spectral overlap between SQD emission and LQD absorption. To investigate the Forster resonance energy transfer (FRET) from SQDs to LQDs, we prepared SQD−LQD mixed QDs (MQDs). The MQD film enhanced LQD emission and exhibited a higher PLQY (52%) with a longer PL decay time (7.4 ns) than those exhibited by the neat LQD film (38% and 6.2 ns). This energy transfer was determined to be FRET by photoluminescence excitation and PL decay times. Moreover, the external quantum efficiency of an MQD-based LED increased to 15%, indicating that the FRET process can enhance the PLQY of the film and LED efficiency.

No abstract

We report a novel DNA-programmed plasmonic enzyme-linked immunosorbent assay (ELISA) for the ultrasensitive detection of protein biomarkers with the naked eye.

The emergence of green materials has attracted considerable attention in the field of optoelectronics. Copper-based lead-free metal halide (with a near-unity quantum yield) obtained from Cs3Cu2I5 nanocrystals (NCs) can exhibit blue emission with a wavelength of 440 nm and provide outstanding stability for various applications. However, in practical applications, colloidal dispersion purity and film quality are inadequate toward a high-performance device. In this study, antisolvent-free gel permeation chromatography is used to purify Cs3Cu2I5 NCs. The purified Cs3Cu2I5 NCs exhibit a high photoluminescent quantum yield and provide a highly oriented single-crystal film. Density functional theory calculation results indicate that the iodide-rich surface in the NCs makes them highly stable. In addition, it has been demonstrated for the first time that the mixture of polymethyl methacrylate (PMMA) and Cs3Cu2I5 NCs has waterproofing capabilities. The composite film consisting of Cs3Cu2I5 NCs and PMMA can survive in water for several days. This result opens up more possibilities for the application of these green material.

A novel enzyme mediated AuNP assembly based colorimetric method for ultrasensitive detection of hepatitis C virus antibody.