The ball shear strength of BGA solder joints during isothermal aging was studied with Sn-3.5Ag-0.75Cu solder on three different pads (Cu, electroless Ni-P/Cu, immersion Au/Ni-P/Cu) at temperature between 70 and 170 • C for times ranging from 1 to 100 days. The reliability of solder ball attachment was characterized by mechanical ball shear tests. As a whole, the shear strength of BGA joints decreased with increasing temperature and time. The shear strength for both the immersion Au/Ni-P/Cu and electroless Ni-P/Cu pads was consistently higher than that of the Cu pad for all isothermal aging conditions. The fracture surface showed various characteristics depending on aging temperature, time, and the types of BGA pad. The P-rich Ni layer formed at the interface between (Cu, Ni) 6 Sn 5 and Ni-P deposits layer after aging, but fracture at this interface was not the dominant site for immersion Au/Ni-P/Cu and electroless Ni-P/Cu pad.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.