We report a simple and practical method for creating colloidal patchy particles with a variety of three-dimensional shapes via the evaporation-induced assembly of polystyrene-b-poly(4-vinylpyridine) (PS-b-P4VP) block copolymer (BCP) in an oil-in-water emulsion. Depending on the particle volume, a series of patchy particles in the shapes of snowmen, dumbbells, triangles, tetrahedra, and raspberry can be prepared, which are then precisely tuned by modulating the interfacial interaction at the particle/water interface using a mixture of two different surfactants. Moreover, for a given interfacial interaction, the stretching penalty of the BCPs in the patchy particles can be systematically controlled by adding P4VP homopolymers, which decreases the number of patches of soft particles from multiple patches to a single patch but increases the size of the patch. Calculations based on the strong segregation theory supported the experimental observation of various soft patchy particles and identified the underlying principles of their formation with tunable 3D structures.

Block copolymers (BCPs) confined in evaporative emulsions can assemble into ellipsoidal particles when solvent evaporation is faster than polymer diffusion within the droplet. Here, we report the synthesis of monodisperse, ellipsoidal polystyrene-block-1,4-polybutadiene (PS-b-PB) BCP particles with tunable aspect ratios (ARs) ranging from 1.0 to 2.2 and particle sizes ranging from 0.1 to 5 μm by membrane emulsification and subsequent solvent evaporation. The ratio of the propagation distance (l p) of ordered BCP domains perpendicular to the particle surface to the particle size (r BCP), or l p/r BCP, was found to be a critical parameter dictating the particle shape, where l p/r BCP > 1 yielded ellipsoids. We show that the AR of colloidal BCP ellipsoids can be precisely controlled by varying particle size (i.e., membrane pore size) and BCP molecular weight, as predicted by theoretical calculations of the free energy of particle elongation including three terms: (1) the interfacial energy between the two blocks of the BCP, (2) the entropic penalty associated with stretching of the BCP chains upon elongation of the particles, and (3) the surface energy between the BCP particles and the surrounding medium. Finally, using the resulting AR-controlled and highly monodisperse colloidal ellipsoids, we systematically investigated the effects of AR on the homogeneity of colloidal coatings obtained by drop-casting the ellipsoids into films.

Control of the shape, size, internal structure, and uniformity of block copolymer (BCP) particles is crucial for determining their utility and functionality in practical applications. Here, we demonstrate a particle restructuring by solvent engineering (PRSE) strategy that combines membrane emulsification and solvent annealing processes to produce monodisperse BCP particles with controlled size, shape, and internal structure. A major advantage of the PRSE approach is the general applicability to different families of functional BCPs, including polystyrene-block-poly­(1,4-butadiene) (PS-b-PB), polystyrene-block-poly­(dimethylsiloxane) (PS-b-PDMS), and polystyrene-block-poly­(4-vinylpyridine) (PS-b-P4VP). PRSE starts with the production of monodisperse BCP spheres in a wide range of particle sizes (from hundreds of nanometers to several tens of microns) using membrane emulsification, followed by successful transformation to shape-anisotropic BCP particles by solvent annealing under neutral wetting conditions. Particle size monodispersity was maintained during the PRSE process with shape transformations from sphere to ellipsoids (i.e., oblate and prolate). The approach was effective in controlling the aspect ratio (AR) of both prolate and oblate ellipsoids over wide ranges. These ARs were well-supported by free energy calculations based on a theoretical model describing particle elongation. Further investigation of the shape-transformation kinetics during the PRSE process revealed that the morphology transformation was driven by reorientation of BCP microdomains, with kinetics being strongly associated with the overall molecular weight of the BCP as well as the annealing time.

The directed self-assembly (DSA) of block copolymers (BCPs) has been suggested as a promising nanofabrication solution. However, further improvements of both the pattern quality and manufacturability remain as critical challenges. Although the use of BCPs with a high Flory-Huggins interaction parameter ( χ ) has been suggested as a potential solution, this practical self-assembly route has yet to be developed due to their extremely slow selfassembly kinetics. In this study, it is reported that warm solvent annealing (WSA) in a controlled environment can markedly improve both the selfassembly kinetics and pattern quality. A means of avoiding the undesirable trade-off between the quality and formation throughput of the self-assembled patterns, which is a dilemma which arises when using the conventional solvent vapor treatment, is suggested. As a demonstration, the formation of well-defi ned 13-nm-wide self-assembled patterns (3σ line edge roughness of ≈2.50 nm) in treatment times of 0.5 min (for 360-nm-wide templates) is shown. Self-consistent fi eld theory (SCFT) simulation results are provided to elucidate the mechanism of the pattern quality improvement realized by WSA.

Background Electrospinning is a simple and effective method for fabricating micro- and nanofiber matrices. Electrospun fibre matrices have numerous advantages for use as tissue engineering scaffolds, such as high surface area-to-volume ratio, mass production capability and structural similarity to the natural extracellular matrix (ECM). Therefore, electrospun matrices, which are composed of biocompatible polymers and various biomaterials, have been developed as biomimetic scaffolds for the tissue engineering applications. In particular, graphene oxide (GO) has recently been considered as a novel biomaterial for skeletal muscle regeneration because it can promote the growth and differentiation of myoblasts. Therefore, the aim of the present study was to fabricate the hybrid fibre matrices that stimulate myoblasts differentiation for skeletal muscle regeneration.ResultsHybrid fibre matrices composed of poly(lactic-co-glycolic acid, PLGA) and collagen (Col) impregnated with GO (GO-PLGA-Col) were successfully fabricated using an electrospinning process. Our results indicated that the GO-PLGA-Col hybrid matrices were comprised of randomly-oriented continuous fibres with a three-dimensional non-woven porous structure. Compositional analysis showed that GO was dispersed uniformly throughout the GO-PLGA-Col matrices. In addition, the hydrophilicity of the fabricated matrices was significantly increased by blending with a small amount of Col and GO. The attachment and proliferation of the C2C12 skeletal myoblasts were significantly enhanced on the GO-PLGA-Col hybrid matrices. Furthermore, the GO-PLGA-Col matrices stimulated the myogenic differentiation of C2C12 skeletal myoblasts, which was enhanced further under the culture conditions of the differentiation media.ConclusionsTaking our findings into consideration, it is suggested that the GO-PLGA-Col hybrid fibre matrices can be exploited as potential biomimetic scaffolds for skeletal tissue engineering and regeneration because these GO-impregnated hybrid matrices have potent effects on the induction of spontaneous myogenesis and exhibit superior bioactivity and biocompatibility.

We report the self-assembly of monolayer vesicles from Janus core–shell bottlebrush polymers. A route was developed to synthesize doubly grafted bottlebrush copolymers (DGBCPs) possessing A-b-B and B′-b-C side chains on a single repeating unit. Graft-through ring-opening metathesis polymerization of a norbornene moiety installed by single unit monomer insertion allowed us to place the backbone on any repeating unit of the core (B and B′) block. By decorating each core chain end with different chains via reversible addition–fragmentation chain transfer polymerization, we can obtain nanoobjects with an asymmetric B core and a phase-separated A/C shell. We demonstrate that polystyrene-branch-polystyrene′ and polylactide-b-polystyrene-branch-polystyrene′-b-poly­(n-butyl acrylate) macromonomers can be successfully synthesized and polymerized to produce DGBCPs in high yields (81–94% conversion) with an absolute molar mass of 149–395 kg mol–1 and a dispersity of 1.18–1.38. In a solvent slightly more selective to A than C, self-assembly of monolayer vesicles with diameter of <100 nm was observed by transmission electron microscopy. Dissipative particle dynamics simulations suggest that increasing the backbone length and moving the backbone toward the B′/C interface increases the backbone bending energy and favors a lower curvature. The spontaneous curvature appears to prefer a particular layer radius, avoiding bilayer formation.

Ultrafine, uniform nanostructures with excellent functionalities can be formed by self-assembly of block copolymer (BCP) thin films. However, extension of their geometric variability is not straightforward due to their limited thin film morphologies. Here, we report that unusual and spontaneous positioning between host and guest BCP microdomains, even in the absence of H-bond linkages, can create hybridized morphologies that cannot be formed from a neat BCP. Our self-consistent field theory (SCFT) simulation results theoretically support that the precise registration of a spherical BCP microdomain (guest, B-b-C) at the center of a perforated lamellar BCP nanostructure (host, A-b-B) can energetically stabilize the blended morphology. As an exemplary application of the hybrid nanotemplate, a nanoring-type Ge2Sb2Te5 (GST) phase-change memory device with an extremely low switching current is demonstrated. These results suggest the possibility of a new pathway to construct more diverse and complex nanostructures using controlled blending of various BCPs.

Angpt-Tie2 is essential for choriocapillary maintenance, and Tie2 activation could be a therapeutic avenue for fundamental treatment of NV-AMD.