Three two-dimensional (2-D) conjugated polythiophenes with bi(thienylenevinylene) side chains (biTV-PTs), P1, P2, and P3, were designed and synthesized for application in polymer solar cells. The absorption spectral, electrochemical, and photovoltaic properties of the biTV-PTs were investigated and compared with those of poly(3-hexylthiophene) (P3HT). The biTV-PTs show a broad absorption band from 350 to 650 nm; especially, the absorption spectrum of P3 displays a broad plateau and much stronger absorbance than that of P3HT in the wavelength range from 350 to 480 nm. Cyclic voltammograms reveal that the onset oxidation and reduction potentials of the biTV-PTs positively shifted by ca. 0.2 V in comparison with those of P3HT, indicating that the HOMO energy level of the biTV-PTs is ca. 0.2 eV lower than that of P3HT. Polymer solar cells (PSCs) were fabricated based on the blend of the polymers and 1-(3-methoxycarbonyl)propyl-1-phenyl-[6,6]-C-61 (PCBM) with a weight ratio of 1:1. The open circuit voltage of the PSCs based on the biTV-PTs is ca. 0.1 V higher than that of P3HT, which is benefited from the lower HOMO levels of the biTV-PTs. The maximum power conversion efficiency (PCE) of the PSCs based on P3 reached 3.18% under AM 1.5, 100 mW/cm2, which is 38% increased in comparison with that (2.41%) of the devices based on P3HT under the same experimental conditions. The results indicate that the 2-D conjugated biTV-PTs are promising polymer photovoltaic materials.

To develop electronic devices with novel functionalities and applications, various non-silicon-based materials are currently being explored. Nanoparticles have unique characteristics due to their small size, which can impart functions that are distinct from those of their bulk counterparts. The use of semiconductor nanoparticles has already led to improvements in the efficiency of solar cells, the processability of transistors and the sensitivity of photodetectors, and the optical and catalytic properties of metal nanoparticles have led to similar advances in plasmonics and energy conversion. However, metals screen electric fields and this has, so far, prevented their use in the design of all-metal nanoparticle circuitry. Here, we show that simple electronic circuits can be made exclusively from metal nanoparticles functionalized with charged organic ligands. In these materials, electronic currents are controlled by the ionic gradients of mobile counterions surrounding the 'jammed' nanoparticles. The nanoparticle-based electronic elements of the circuitry can be interfaced with metal nanoparticles capable of sensing various environmental changes (humidity, gas, the presence of various cations), creating electronic devices in which metal nanoparticles sense, process and ultimately report chemical signals. Because the constituent nanoparticles combine electronic and chemical sensing functions, we term these systems 'chemoelectronic'. The circuits have switching times comparable to those of polymer electronics, selectively transduce parts-per-trillion chemical changes into electrical signals, perform logic operations, consume little power (on the scale of microwatts), and are mechanically flexible. They are also 'green', in the sense that they comprise non-toxic nanoparticles cast at room temperature from alcohol solutions.

Resin specimens were prepared for Fourier transform infrared (FTIR) spectroscopy and microhardness testing to determine the DC and Vickers hardness (VH), respectively. The lightcured materials or mixed pastes of the dualcured materials were irradiated with a light-curing unit (Elipar TriLight) through a precured composite overlay for 40 seconds. The FTIR spectra and microhardness readings were taken at specified times: 1, 2, 5, 10, 15, 30 and 60 minutes; 24 hours and after two days and seven days. YL Yan • YK Kim K-H Kim • T-Y Kwon Clinical RelevanceChemical-and dual-cured resin cements, as well as light-cured resin cements, appear to be cured within the first 24 hours post-mix or post-light activation with no further significant changes in the degree of conversion or microhardness.According to the FTIR study, most of the curing reaction of Choice 2 and RelyX Veneer occurred within 10 and 30 minutes, respectively. Multilink, C&B Cement and Calibra exhibited gradual increases in the DC up to 24 hours, with no further statistically significant increase (p>0.05). RelyX ARC attained a DC value within five minutes, similar to that at seven days (p>0.05). Choice 2 and RelyX ARC showed gradual increases in the VH, up to 15 minutes, with no further significant change over the remaining observation time (p>0.05). For RelyX Veneer, Multilink, C&B Cement and Calibra, there were no significant increases in the VH value after 24 hours (p>0.05). The light-cured materials produced significantly higher DC values than the chemicalcured materials (p<0.05). The DC values of the two dual-cured resin cements were significantly different from each other (p<0.001). The results suggest that the significant polymerization reaction was finished within 24 hours post-mix or post-light activation for all resin cements tested.

Dopant‐induced helical conformations of polyaniline (PANI) nanofibers are presented. Right‐ and left‐handed helical nanofibers of conducting PANI are produced using respectively D‐ and L‐camphorsulfonic acid as the dopant, it is reported, as proved by the mirror‐image chiral dichroism spectra (see figure). The authors suggest a mechanism for the formation of nanofibrillar bundles of helical nanofibers.

No abstract

Monitoring and manipulating the physical and chemical behavior of single molecules is an important development direction of molecular electronics that aids in understanding the molecular world at the single-molecule level. The electrical detection platform based on single-molecule junctions can monitor physical and chemical processes at the singlemolecule level with a high temporal resolution, stability, and signal-to-noise ratio. Recently, the combination of singlemolecule junctions with different multimodal control systems has been widely used to explore significant physical and chemical phenomena because of its powerful monitoring and control capabilities. In this review, we focus on the applications of singlemolecule junctions in monitoring molecular physical and chemical processes. The methods developed for characterizing single-molecule charge transfer and spin characteristics as well as revealing the corresponding intrinsic mechanisms are introduced. Dynamic detection and regulation of single-molecule conformational isomerization, intermolecular interactions, and chemical reactions are also discussed in detail. In addition to these dynamic investigations, this review discusses the open challenges of single-molecule detection in the fields of physics and chemistry and proposes some potential applications in this field.

Switchable nanomaterials--materials that can change their properties and/or function in response to external stimuli-have potential applications in electronics, sensing and catalysis. Previous efforts to develop such materials have predominately used molecular switches that can modulate their properties by means of conformational changes. Here, we show that electrical conductance through films of gold nanoparticles coated with a monolayer of charged ligands can be controlled by dynamic, long-range gradients of both mobile counterions surrounding the nanoparticles and conduction electrons on the nanoparticle cores. The internal gradients and the electric fields they create are easily reconfigurable, and can be set up in such a way that electric currents through the nanoparticles can be modulated, blocked or even deflected so that they only pass through select regions of the material. The nanoion/counterion hybrids combine the properties of electronic conductors with those of ionic gels/polymers, are easy to process by solution-casting and, by controlling the internal gradients, can be reconfigured into different electronic elements (current rectifiers, switches and diodes).

Chiral amplification and discrimination are great challenges in both scientific and technological research fields such as chemical synthesis, chiral catalysis, and biomedicine. By mimicking protein superstructures in nature, chiral conducting polyaniline (PANI) molecules induced by chiral dopants were self-assembled to ultra-ordered superhelical microfibers. The induced homochirality is observed to be amplified into different hierarchies, from chiral molecules to helical nanostructures, and to superhelical microstructures. Furthermore, both experimental and theoretical results indicated that the gas sensor made from a single PANI helical microfiber showed enantioselective discrimination to chiral aminohexane, giving it great potential for applications in online chiral discrimination.