A Physical Unclonable Function (PUF) can be used to provide authentication of devices by producing die-unique responses. In PUFs based on ring oscillators (ROs), the responses are derived from the oscillation frequencies of the ROs. However, RO PUFs can be vulnerable to attack due to the frequency distribution characteristics of the RO arrays. In this paper, in order to improve the design of RO PUFs for FPGA devices, the frequencies of RO arrays implemented on a large number of FPGA chips are statistically analyzed. Three RO frequency distribution (ROFD) characteristics are observed and discussed. Based on these ROFD characteristics, two RO comparison strategies are proposed that can be used to improve the design of RO PUFs. It is found that the symmetrical RO comparison strategy has the highest entropy density.

No abstract

A PUF is a physical security primitive that allows to extract intrinsic digital identifiers from electronic devices. It is a promising candidate to improve security in lightweight devices targeted at IoT applications due to its low cost nature. The Arbiter PUF or APUF has been widely studied in the technical literature. However it often suffers from disadvantages such as poor uniqueness and reliability, particularly when implemented on FPGAs due to physical layout restrictions. To address these problems, a new design known as FF-APUF has been proposed; it offers a compact architecture, combined with good uniqueness and reliability properties, and is well suited to FPGA implementation. Many PUF designs have been shown to be vulnerable to machine learning (ML) based modelling attacks. In this paper, initial tests show that to attack the FF-APUF design requires more effort for the adversary than a conventional APUF design. A comprehensive analysis of the experimental results for the FF-APUF design is presented to show this outcome. An improved APUF design with a balanced routing, and the proposed FF-APUF design are both implemented on an Xilinx Artix-7 FPGA at 28 nm technology. The empirical min-entropy of the FF-APUF design across different devices is shown to be more than twice that of the conventional APUF design.

No abstract

No abstract

Physical unclonable function (PUF) is a primary hardware security primitive that is suitable for lightweight applications. However, it is found to be vulnerable to modeling attacks using machine learning algorithms. In this paper, multiplexer (MUX)-based Multi-PUF (MMPUF) design is proposed to thwart modeling attacks. The proposed design uses a weak PUF to obfuscate the challenge of a strong PUF. A mathematical model of the proposed design is presented and analyzed. The three most widely used modeling attack techniques are used to evaluate the resistance of the proposed design. Experimental results show that the proposed MMPUF design is more resistant to the machine learning attack than the previously proposed XOR-based Multi-PUF (XMPUF) design. For a large sample size, the prediction rate of the proposed MMPUF is less than the conventional Arbiter PUF (APUF). Compared with existing attack-resistant PUF designs, the proposed MMPUF design demonstrates high resistance. To verify the proposed design, a hardware implementation on Xilinx 7 Series FPGAs is presented. The hardware experimental results show that the proposed MMPUF designs present good results of uniqueness and reliability.

Physical unclonable function (PUF) is a promising security primitive for IP protection and user authentication. As there are plenty of reconfigurable resources in a field programmable gate array (FPGA), configurable ring oscillator (CRO) PUF is one of the most hardware efficient PUF designs. Previous CRO PUF designs have relatively improved the yield of challenge and response pairs (CRPs). In this paper, a highly flexible CRO PUF based on FPGA, defined as Transformer PUF, is proposed. The proposed PUF design, which has multiple reconfigurability from XOR gates and multiplexers, can be deformable between different CRO PUFs. Compared with the traditional CRO PUFs, it is more resistant to two common machine learning attack techniques, logistic regression (LR) and covariance matrix adaptation evolutionary strategies (CMA-ES), with a small sample set size. Moreover, the Transformer PUF achieves the highest hardware efficiency among CRO PUFs. The results of the experiment carried out on Xilinx Artix-7 development board demonstrate that Transformer PUF has a good uniqueness of 49.44% and a high reliability of 98.12%.

A physical unclonable function (PUF) is a hardware security primitive, which can be used secure various hardware-based applications. As a type of PUFs, strong PUFs have a large number of challenge-response pairs (CRPs), which can be used for authentication. At present, most strong PUF structures follow a one-to-one input/output relationship, i.e. linear function. As such, strong PUF designs are vulnerable to machine learning (ML) based modeling attacks. To address the issue, a dynamically configurable PUF structure is proposed in this paper. A mathematical model of the proposed dynamic PUF is presented and the design is proposed against the effective ML based attacks, such as deep neural network (DNN), logistic regression (LR) and reliability-based covariance matrix adaptation evolution strategies (CMA-ES). Experimental results on field programmable gate arrays (FPGAs) show that the proposed dynamic structure has achived good uniqueness and reliability. It is also shown that the dynamic PUF has a strong resistance to the CMA-ES attack. Due to the dynamic nature of the proposed PUF structure, an authentication protocol is also designed to generate recognizable authentication bits string. The protocol shows strong resistance to classical machine learning attacks including the new variant of CMA-ES.