Synchronous reference frame (SRF) phase-locked loop (PLL) is a critical component for the control and grid synchronization of three-phase grid-connected power converters. The PLL behaviors, especially its low-frequency dynamics, influenced by different grid and load impedances as well as operation mode have not been investigated yet, which may not be captured by conventional linear PLL models. In this paper, we propose a state-feedback quasi-static SRF-PLL model, which can identify and quantify the inherent frequency self-synchronization mechanism in the converter control system. This self-synchronization effect is essentially due to the converter interactions with grid impedance and power flow directions. The low-frequency nonlinear behaviors of the PLL under different grid impedance conditions are then analyzed, which forms the framework of evaluating the impacts of the large penetration level of distributed generation units, weak grid, microgrid, and large reactive power consumption in terms of the frequency stability of PLL. Specifically, the PLL behavior of the converter system under islanded condition is investigated to explain the PLL instability issues and the related islanding-detection methods in early publications and industry reports

No abstract

No abstract

The current-fed dual active bridge (CF-DAB) dc-dc converter gains growing applications in photovoltaic (PV) and energy storage systems due to its advantages, e.g., a wide input voltage range, a high step-up ratio, a low input current ripple, and a multiport interface capability. In addition, the direct input current controllability and extra control freedom of the CF-DAB converter make it possible to buffer the double-line-frequency energy in gridinteractive PV systems without using electrolytic capacitors in the dc link. Therefore, a PV system achieves high reliability and highly efficient maximum power point tracking. This paper studies the optimized operation of a CF-DAB converter for a PV application in order to improve the system efficiency. The operating principle and soft-switching conditions over the wide operating range are thoroughly analyzed with phase-shift control and duty-cycle control, and an optimized operating mode is proposed to achieve the minimum root-mean-square transformer current. The proposed operating mode can extend the soft-switching region and reduce the power loss, particularly under a heavy load and a high input voltage. Moreover, the efficiency can be further improved with a higher dc-link voltage. A 5-kW hardware prototype was built in the laboratory, and experimental results are provided for verification. This paper provides a design guideline for the CF-DAB converter applied to PV systems, as well as other applications with a wide input voltage variation.Index Terms-Current-fed dual active bridge (CF-DAB), optimized operation, photovoltaic (PV), root-mean-square (RMS) current, soft switching. I. INTRODUCTIOND UAL active bridge (DAB) dc-dc converters have been popular for various applications over the past two decades due to the advantages of high-frequency galvanic isolation, Manuscript

No abstract

to 2008, he was a NSERC Postgraduate (Doctor) scholar at the University of New Brunswick. Since 2009, he has been with Siemens Corporate Technology in USA as a power electronics manager. His current research interests include multilevel topologies and controls for utility and industry applications.

No abstract

No abstract