 HTS prototype conductor sample achieved 100 kA for 1 hour  Mechanical lap-joint confirms low joint resistance (2 nW)  "Joint-winding" of helical coils technically feasible

DOI to the publisher's website. • The final author version and the galley proof are versions of the publication after peer review. • The final published version features the final layout of the paper including the volume, issue and page numbers. Link to publication General rights Copyright and moral rights for the publications made accessible in the public portal are retained by the authors and/or other copyright owners and it is a condition of accessing publications that users recognise and abide by the legal requirements associated with these rights. • Users may download and print one copy of any publication from the public portal for the purpose of private study or research. • You may not further distribute the material or use it for any profit-making activity or commercial gain • You may freely distribute the URL identifying the publication in the public portal. If the publication is distributed under the terms of Article 25fa of the Dutch Copyright Act, indicated by the "Taverne" license above, please follow below link for the End User Agreement:

No abstract

In this paper, we reported design, fabrication and test of a prototype 100-kA-class high-temperature superconducting (HTS) conductor, especially for joint section, to be used for segmented HTS helical coils in the FFHR-d1 heliotron-type fusion reactor. The conductor has a geometry of three rows and fourteen layers of Gadolinium Barium Copper Oxide HTS (GdBCO) tapes embedded in copper and stainless steel jackets and has a joint section with bridge-type mechanical lap joint. We introduced improved method to fabricate the joint based on pilot experiments and we were able to apply a current of ∼ 120 kA at 4.2 K, 0.45 T to the sample without quench at joint. The obtained joint resistance was ∼ 2 nΩ, which was lower than our previous data. Though joint resistance increased with a rise in current and magnetic field, predicted joint resistance in the environment of actual helical coil in the FFHR-d1 was small enough to properly run the cryoplant of the reactor.

No abstract

No abstract

No abstract

No abstract