We present the microfabrication and characterization of a ball valve micropump in glass, which is magnetically actuated using the sinusoidal current of an external electromagnet. We employ the use of a simple powder blasting technology for microstructuring the glass substrates and fusion bonding for assembly of the multi-layered microfluidic chip. The use of a polymer membrane with embedded permanent magnet gives rise to a large actuation stroke, making the micropump bubble-tolerant and self-priming. The micropump exhibits a backpressure as high as 280 mbar and water flow rates up to 5 mL/min thanks to the large magnetic actuation force and the use of high-efficiency ball valves. The frequency-dependent characteristics are in excellent agreement with a hydrodynamic damped oscillator model.

No abstract

We present two types of oscillating diaphragm micropumps configured with passive ball valves and using electromagnetic actuation. One type is made out of poly(methyl methacrylate) (PMMA), while the other one is made out of borosilicate glass. Both were produced using the powder blasting microfabrication method. The pumping resonant frequency was measured to be within the range of 20 -30 Hz for both prototypes. At the resonance, a maximum backpressure of 280 mbar and a maximum water flow rate of about 5 mL/min were obtained. The experimental results can be well described by a simple hydrodynamic model of the system.