Since the discovery of size-selective metal-organic frameworks (MOFs), researchers have tried to incorporate these materials into gas separation membranes. Impressive gas selectivities were found, but these MOF membranes were mostly made on inorganic supports, which are generally too bulky and expensive for industrial gas separation. Forming MOF layers on porous polymer supports is industrially attractive but technically challenging. Two features to overcome these problems are described: 1) a metal chelating support polymer to bind the MOF layer, and 2) control of MOF crystal growth by contra-diffusion, aiming at a very thin nanocrystalline MOF layer. Using a metal chelating poly-thiosemicarbazide (PTSC) support and adjusting the metal and organic ligand concentrations carefully, a very compact ZIF-8 (ZIF=zeolitic imidazolate framework) layer was produced that displayed interference colors because of its smooth surface and extreme thinness-within the range of visible light. High performances were measured in terms of hydrogen/propane (8350) and propylene/propane (150) selectivity.

A variety of phosphorus(V) octaethylporphyrin derivatives of the type [P(OEP)(X)(Y)](+)Z(-) (OEP: octaethylporphyrin) (X = CH(3), CH(2)CH(3), C(6)H(5), F; Y = CH(3), CH(2)CH(3), OH, OCH(3), OCH(2)CH(3), On-Pr, Oi-Pr, Osec-Bu, NHBu, NEt(2), Cl, F, O(-); Z = ClO(4), PF(6)) were prepared. X-ray crystallographic analysis of eleven compounds reveals that the degree of ruffling of the porphyrin core becomes greater and the average P-N bond distance becomes shorter as the axial ligands become more electronegative. Therefore, the electronic effect of the axial substituents plays a major role in determining the degree of ruffling although the steric effect of the substituents plays some role. A comparison of the (1)H NMR chemical shifts for the series of [P(OEP)(CH(2)CH(3))(Y)](+)Z(-) complexes with those of the corresponding arsenic porphyrins, which possess a planar core, indicates a much smaller ring current effect of the porphyrin core in the severely ruffled phosphorus porphyrins. The electrochemistry, spectroelectrochemistry and ESR spectroscopy of the singly reduced compounds are also discussed. The OH protons of [P(OEP)(X)(OH)](+) are acidic enough to generate P(OEP)(X)(O) by treatment with aq dilute NaOH. X-ray analysis of P(OEP)(CH(2)CH(3))(O) reveals that the PO bond length is very short (1.475(7) A) and is comparable to that in triphenylphosphine oxide (1.483 A). The features of the quite unique hexacoordinate hypervalent compounds are investigated by density functional calculation of a model (Por)P(CH(2)CH(3))(O) and (Por)P(F)(O) (Por: unsubstituted porphyrin).

We theoretically predict and experimentally observe the two-dimensional (2-D) bright solitons in a nonconventionally biased strontium barium niobate (SBN) crystal. A theory describing light propagating in an SBN crystal with a bias field along an arbitrary direction is formulated. Then the existence of 2-D bright solitons in such a crystal is numerically verified. By employing digital holography, the index changes induced by Gaussian beams in an SBN crystal under different biasing conditions are visualized. Finally, skewed elliptical solitons are experimentally demonstrated.

No abstract

Since the discovery of size‐selective metal–organic frameworks (MOFs), researchers have tried to incorporate these materials into gas separation membranes. Impressive gas selectivities were found, but these MOF membranes were mostly made on inorganic supports, which are generally too bulky and expensive for industrial gas separation. Forming MOF layers on porous polymer supports is industrially attractive but technically challenging. Two features to overcome these problems are described: 1) a metal chelating support polymer to bind the MOF layer, and 2) control of MOF crystal growth by contra‐diffusion, aiming at a very thin nanocrystalline MOF layer. Using a metal chelating poly‐thiosemicarbazide (PTSC) support and adjusting the metal and organic ligand concentrations carefully, a very compact ZIF‐8 (ZIF=zeolitic imidazolate framework) layer was produced that displayed interference colors because of its smooth surface and extreme thinness—within the range of visible light. High performances were measured in terms of hydrogen/propane (8350) and propylene/propane (150) selectivity.

Mixed-matrix membranes (MMMs) have been investigated to render energy-intensive separations more efficiently by combining the selectivity and permeability performance, robustness, and nonaging properties of the filler with the easy processing, handling, and scaling up of the polymer. However, truly combining all in one single material has proven very challenging. In this work, we filled a commercial polyimide with ultrahigh loadings of a high–aspect ratio, CO 2 -philic Na-SSZ-39 zeolite with a three-dimensional channel system that precisely separates gas molecules. By carefully designing both zeolite and MMM synthesis, we created a gas-percolation highway across a flexible and aging-resistant (more than 1 year) membrane. The combination of a CO 2 -CH 4 mixed-gas selectivity of ~423 and a CO 2 permeability of ~8300 Barrer outperformed all existing polymer-based membranes and even most zeolite-only membranes.

No abstract

No abstract