Diverse electromagnetic (EM) responses of a programmable metasurface with a relatively large scale have been investigated, where multiple functionalities are obtained on the same surface. The unit cell in the metasurface is integrated with one PIN diode, and thus a binary coded phase is realized for a single polarization. Exploiting this anisotropic characteristic, reconfigurable polarization conversion is presented first. Then the dynamic scattering performance for two kinds of sources, i.e. a plane wave and a point source, is carefully elaborated. To tailor the scattering properties, genetic algorithm, normally based on binary coding, is coupled with the scattering pattern analysis to optimize the coding matrix. Besides, inverse fast Fourier transform (IFFT) technique is also introduced to expedite the optimization process of a large metasurface. Since the coding control of each unit cell allows a local and direct modulation of EM wave, various EM phenomena including anomalous reflection, diffusion, beam steering and beam forming are successfully demonstrated by both simulations and experiments. It is worthwhile to point out that a real-time switch among these functionalities is also achieved by using a field-programmable gate array (FPGA). All the results suggest that the proposed programmable metasurface has great potentials for future applications.

No abstract

No abstract

This study provides Class III evidence that 4D-flow MRI accurately identifies patients with venous PT.

We theoretically and experimentally proposed a new structure of ultra-wideband and thin perfect metamaterial absorber loaded with lumped resistances. The thin absorber was composed of four dielectric layers, the metallic double split ring resonators (MDSRR) microstructures and a set of lumped resistors. The mechanism of the ultra-wideband absorption was analyzed and parametric study was also carried out to achieve ultra-wideband operation. The features of ultra-wideband, polarization-insensitivity, and angle-immune absorption were systematically characterized by the angular absorption spectrum, the near electric-field, the surface current distributions and dielectric and ohmic losses. Numerical results show that the proposed metamaterial absorber achieved perfect absorption with absorptivity larger than 80% at the normal incidences within 4.52~25.42 GHz (an absolute bandwidth of 20.9GHz), corresponding to a fractional bandwidth of 139.6%. For verification, a thin metamaterial absorber was implemented using the common printed circuit board method and then measured in a microwave anechoic chamber. Numerical and experimental results agreed well with each other and verified the desired polarization-insensitive ultra-wideband perfect absorption.

These results indicate that DVS stenosis is the cause of pulsatile tinnitus in these cases and that angioplasty and stenting are an effective and safe treatment for intractable pulsatile tinnitus caused by DVS stenosis.

Stretchable electronics has emerged as a new class of electronic technology to expand the applications of conventional electronics built on rigid wafers. Among various systems, liquid-state devices utilize electronically active liquids to achieve excellent stretchability and durability. The widespread adaption to such attractive form of device is hindered by the lack of robust fabrication approach to precisely and efficiently assemble liquid-state materials into functional systems. In this study, an additive manufacturing platform for digital fabrication of three-dimensional elastomeric structures is reported. The shear-thinning ink is formulated to enable omnidirectional printing process. Various elastic features with complex architectures are generated without using sacrificial materials, which consist of overhanging parts, suspended structures, and embedded channels. Harnessing the unique printability allows facile creation of elastomeric sensors with strain-and pressure-sensing capabilities by simply filling the embedded microchannels with liquid metal. A smart glove to capture hand gestures is also demonstrated as a fully integrated electronic system with liquid-state components. The liquid-state stretchable electronics developed here may find potential applications in biomedical instruments, wearable devices, and soft robotics.

The simultaneous improvement of radiating and scattering performance of an antenna is normally considered as a contradiction. In this study, wideband radar cross‐section (RCS) reduction and gain enhancement are both achieved for a conventional patch antenna by loading metamaterial in an improved way. First, two artificial magnetic conductor units are selected to construct a chessboard‐like metamaterial surface (CLMS) which has wideband low RCS property. Then the CLMS is applied to a conventional patch antenna for the purpose of RCS reduction. Through a detailed investigation of three loading manners, a metamaterial‐based patch antenna with both improved RCS and gain is proposed and experimentally validated. Both simulated and measured results show that, compared with the original antenna, the gain of the proposed antenna is enhanced almost over the whole operation band, and the wideband (in‐band and out‐of‐band) RCS reduction is achieved concurrently.