Tailoring the electronic arrangement of graphene by doping is a practical strategy for producing significantly improved materials for the oxygen-reduction reaction (ORR) in fuel cells (FCs). Recent studies have proven that the carbon materials doped with the elements, which have the larger (N) or smaller (P, B) electronegative atoms than carbon such as N-doped carbon nanotubes (CNTs), P-doped graphite layers and B-doped CNTs, have also shown pronounced catalytic activity. Herein, we find that the graphenes doped with the elements, which have the similar electronegativity with carbon such as sulfur and selenium, can also exhibit better catalytic activity than the commercial Pt/C in alkaline media, indicating that these doped graphenes hold great potential for a substitute for Pt-based catalysts in FCs. The experimental results are believed to be significant because they not only give further insight into the ORR mechanism of these metal-free doped carbon materials, but also open a way to fabricate other new low-cost NPMCs with high electrocatalytic activity by a simple, economical, and scalable approach for real FC applications.
Molybdenum carbide (Mo2C) is recognized as an alternative electrocatalyst to noble metal for the hydrogen evolution reaction (HER). Herein, a facile, low cost, and scalable method is provided for the fabrication of Mo2C‐based eletrocatalyst (Mo2C/G‐NCS) by a spray‐drying, and followed by annealing. As‐prepared Mo2C/G‐NCS electrocatalyst displays that ultrafine Mo2C nanopartilces are uniformly embedded into graphene wrapping N‐doped porous carbon microspheres derived from chitosan. Such designed structure offer several favorable features for hydrogen evolution application: 1) the ultrasmall size of Mo2C affords a large exposed active sites; 2) graphene‐wrapping ensures great electrical conductivity; 3) porous structure increases the electrolyte–electrode contact points and lowers the charge transfer resistance; 4) N‐dopant interacts with H+ better than C atoms and favorably modifies the electronic structures of adjacent Mo and C atoms. As a result, the Mo2C/G‐NCS demonstrates superior HER activity with a very low overpotential of 70 or 66 mV to achieve current density of 10 mA cm−2, small Tafel slope of 39 or 37 mV dec−1, respectively, in acidic and alkaline media, and high stability, indicating that it is a great potential candidate as HER electrocatalyst.
Sandwich‐type hybrid carbon nanosheets (SCNMM) consisting of graphene and micro/mesoporous carbon layer are fabricated via a double template method using graphene oxide as the shape‐directing agent and SiO2 nanoparticles as the mesoporous guide. The polypyrrole synthesized in situ on the graphene oxide sheets is used as a carbon precursor. The micro/mesoporous strcutures of the SCNMM are created by a carbonization process followed by HF solution etching and KOH treatment. Sulfur is impregnated into the hybrid carbon nanosheets to generate S@SCNMM composites for the cathode materials in Li‐S secondary batteries. The microstructures and electrochemical performance of the as‐prepared samples are investigated in detail. The hybrid carbon nanosheets, which have a thickness of about 10–25 nm, high surface area of 1588 m2 g−1, and broad pore size distribution of 0.8–6.0 nm, are highly interconnected to form a 3D hierarchical structure. The S@SCNMM sample with the sulfur content of 74 wt% exhibits excellent electrochemical performance, including large reversible capacity, good cycling stability and coulombic efficiency, and good rate capability, which is believed to be due to the structure of hybrid carbon materials with hierarchical porous structure, which have large specific surface area and pore volume.
A lightweight multifunctional SNGE interlayer was developed, which enabled the PCNT–S cathode to deliver a high reversible specific capacity and extraordinarily excellent cycling stability at ultrahigh rates.
Rational design of hollow micro‐ and/or nano‐structured cathodes as sulfur hosts has potential for high‐performance lithium‐sulfur batteries. However, their further commercial application is hindered because infusing sulfur into hollow hosts is hard to control and the interactions between high loading sulfur and electrolyte are poor. Herein, we designed hierarchical porous hollow carbon nanospheres with radially inwardly aligned supporting ribs to mitigate these problems. Such a structure could aid the sulfur infusion and maximize sulfur utilization owing to the well‐ordered pore channels. This highly organized internal carbon skeleton can also enhance the electronic conductivity. The hollow carbon nanospheres with further nitrogen‐doping as the sulfur host material exhibit good capacity and excellent cycling performance (0.044 % capacity degradation per each cycle for 1000 cycles).
Single crystalline wurtzite ternary and quaternary semiconductor nanoribbons (CuInS(2), CuIn(x)Ga(1-x)S(2)) were synthesized through a solution-based method. The structure and composition of the nanoribbons were characterized by X-ray diffraction (XRD), high resolution transmission electron microscopy (HRTEM), the corresponding fast Fourier transform (FFT) and nanoscale-resolved elemental mapping. Detailed investigation of the growth mechanism by monitoring the structures and morphologies of the nanoribbons during the growth indicates that Cu(1.75)S nanocrystals are formed first and act as a catalyst for the further growth of the nanoribbons. The high mobility of Cu(+) promotes the generation of Cu(+) vacancies in Cu(1.75)S, which will facilitate the diffusion of Cu, In or Ga species from solution into Cu(1.75)S to reach supersaturated states. The supersaturated species in the Cu(1.75)S catalyst, Cu-In-S and Cu-In-Ga-S species, start to condense and crystallize to form wurtzite CuInS(2) or CuIn(x)Ga(1-x)S(2) phases, firstly resulting in two-sided nanoparticles. Successive crystallizations gradually impel the Cu(1.75)S catalyst head forward and prolong the length of the CuInS(2) or CuIn(x)Ga(1-x)S(2) body, forming heterostructured nanorods and thus nanoribbons. The optical band gaps of CuIn(x)Ga(1-x)S(2) nanoribbons can be continuously adjusted between 1.44 eV and 1.91 eV, depending on the Ga concentration in nanoribbons. The successful preparation of those ternary and quaternary semiconductor nanoribbons provide us an opportunity to study their photovoltaic properties. The primary photoresponsive current measurements demonstrate that wurtzite CuIn(x)Ga(1-x)S(2) nanoribbons are excellent photoactive materials. Furthermore, this facile method could open a new way to synthesize other various nano-structured ternary and quaternary semiconductors, such as CuInSe(2) and CuIn(x)Ga(1-x)Se(2), for applications in solar cells and other fields.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.