An integrated, selective interlayer structure is developed to further mitigate the diffusion of polysulfides, simply by coating the surface of a C–S cathode with a graphene/TiO2 film. It is found that the application of the graphene/TiO2 film as an interlayer enables the porous carbon nanotubes–S cathode to exhibit a high reversible specific capacity and extraordinarily excellent cycling stability.
Despite the good progress in developing doped carbon catalysts for oxygen-reduction reaction (ORR), the current metal-free carbon catalysts are still far from satisfactory for large-scale applications of fuel cell. Developing new metal free doped carbon materials with abundance active sites as well as excellent electron transfer and reactant transport rate towards ORR may be a potential solution. Herein, we develop a novel three-dimensional (3D) sulfur-nitrogen co-doped carbon foams (S-N-CF) with hierarchical pore structures, using a convenient, economical, and scalable method. The experimental results have demonstrated that the obtained 3D S-N-CF exhibited better catalytic activity, longer-term stability and higher methanol tolerance than a commercial Pt/C catalyst. Such excellent performances may be attributed to the synergistic effect, which includes high catalytic sites for ORR provided by high S-N heteroatom loading, excellent reactant transport caused by hierarchical pore structures and high electron transfer rate provided by 3D continuous networks. Our results not only develop a new type of catalysts with excellent electrocatalytic performance by a commercially valid route, but also provide useful information for further clarification of the relationship between the microstructures of metal-free carbon materials and catalyst properties for ORR. More importantly, the idea to design hierarchical pore structures could be applied to other catalytic materials and serve as a general strategy for improving the activity of various ORR catalysts.
Driven by increasing demand for high‐energy‐density batteries for consumer electronics and electric vehicles, substantial progress is achieved in the development of long‐life lithium–sulfur (Li–S) batteries. Less attention is given to Li–S batteries with high volume energy density, which is crucial for applications in compact space. Here, a series of elastic sandwich‐structured cathode materials consisting of alternating VS2‐attached reduced graphene oxide (rGO) sheets and active sulfur layers are reported. Due to the high polarity and conductivity of VS2, a small amount of VS2 can suppress the shuttle effect of polysulfides and improve the redox kinetics of sulfur species in the whole sulfur layer. Sandwich‐structured rGO–VS2/S composites exhibit significantly improved electrochemical performance, with high discharge capacities, low polarization, and excellent cycling stability compared with their bare rGO/S counterparts. Impressively, the tap density of rGO–VS2/S with 89 wt% sulfur loading is 1.84 g cm−3, which is almost three times higher than that of rGO/S with the same sulfur content (0.63 g cm−3), and the volumetric specific capacity of the whole cell is as high as 1182.1 mA h cm−3, comparable with the state‐of‐the‐art reported for energy storage devices, demonstrating the potential for application of these composites in long‐life and high‐energy‐density Li–S batteries.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.