Tricin was recently discovered in lignin preparations from wheat (Triticum aestivum) straw and subsequently in all monocot samples examined. To provide proof that tricin is involved in lignification and establish the mechanism by which it incorporates into the lignin polymer, the 49-Ob-coupling products of tricin with the monolignols (p-coumaryl, coniferyl, and sinapyl alcohols) were synthesized along with the trimer that would result from its 49-O-b-coupling with sinapyl alcohol and then coniferyl alcohol. Tricin was also found to cross couple with monolignols to form tricin-(49-O-b)-linked dimers in biomimetic oxidations using peroxidase/hydrogen peroxide or silver (I) oxide. Nuclear magnetic resonance characterization of gel permeation chromatography-fractionated acetylated maize (Zea mays) lignin revealed that the tricin moieties are found in even the highest molecular weight fractions, ether linked to lignin units, demonstrating that tricin is indeed incorporated into the lignin polymer. These findings suggest that tricin is fully compatible with lignification reactions, is an authentic lignin monomer, and, because it can only start a lignin chain, functions as a nucleation site for lignification in monocots. This initiation role helps resolve a long-standing dilemma that monocot lignin chains do not appear to be initiated by monolignol homodehydrodimerization as they are in dicots that have similar syringyl-guaiacyl compositions. The term flavonolignin is recommended for the racemic oligomers and polymers of monolignols that start from tricin (or incorporate other flavonoids) in the cell wall, in analogy with the existing term flavonolignan that is used for the lowmolecular mass compounds composed of flavonoid and lignan moieties.Lignin, a complex phenylpropanoid polymer in the plant cell wall, is predominantly deposited in the cell walls of secondary-thickened cells (Vanholme et al., 2010). It is synthesized via oxidative radical coupling reactions from three prototypical monolignols, p-coumaryl, coniferyl, and sinapyl alcohols, differentiated by their degree of methoxylation ortho to the phenolic hydroxyl group. Considered within the context of the entire polymer, the main structural features of lignin can be defined in terms of its p-hydroxyphenyl (H), guaiacyl (G), and syringyl (S) units, derived respectively from these three monolignols (Ralph, 2010). Several novel monomers, all deriving from the monolignol biosynthetic pathway, have been found to incorporate into lignin in wild-type and transgenic plants. For example, monolignol acetate, p-hydroxybenzoate, and p-coumarate ester conjugates have all been shown to incorporate into lignin polymers and are the source of naturally acylated lignins (Ralph et al., 2004;Lu and Ralph, 2008); lignins derived solely from caffeyl alcohol were found in the seed coats of both monocot and dicot plants (Chen et al., 2012a(Chen et al., , 2012b; lignins derived solely from 5-hydroxyconiferyl alcohol were found in a cactus (for example, in a member of the genera Astrop...

Protection groups were introduced during biomass pretreatment to stabilizel ignins a,g-diol group during its extraction and prevent its condensation. Acetaldehyde and propionaldehyde stabilized the a,g-diol without any aromatic ring alkylation, whichs ignificantly increased final product selectivity.T he subsequent hydrogenolysis catalyzedb yP d/C generated lignin monomers at near-theoretical yields based on Klason lignin (48 %from birch,20% from spruce,70% from high-syringyl transgenic poplar), and with high selectivity to asingle 4-n-propanolsyringol product (80 %) in the case of the poplar.U nlike direct hydrogenation of native wood, hydrogenolysis of protected lignin with Ni/C also led to high selectivity to this single product (78 %), paving the way to highselectivity lignin upgrading with base metal catalysts.T he use of extracted lignin facilitated valorization of polysaccharides, leading to high yields of all three major biomass polymers to asingle major product.

SUMMARYTricin [5,7-dihydroxy-2-(4-hydroxy-3,5-dimethoxyphenyl)-4H-chromen-4-one], a flavone, was recently established as an authentic monomer in grass lignification that likely functions as a nucleation site. It is linked onto lignin as an aryl alkyl ether by radical coupling with monolignols or their acylated analogs. However, the level of tricin that incorporates into lignin remains unclear. Herein, three lignin characterization methods: acidolysis; thioacidolysis; and derivatization followed by reductive cleavage; were applied to quantitatively assess the amount of lignin-integrated tricin. Their efficiencies at cleaving the tricin-(4 0 -O-b)-ether bonds and the degradation of tricin under the corresponding reaction conditions were evaluated. A hexadeuterated tricin analog was synthesized as an internal standard for accurate quantitation purposes. Thioacidolysis proved to be the most efficient method, liberating more than 91% of the tricin with little degradation. A survey of different seed-plant species for the occurrence and content of tricin showed that it is widely distributed in the lignin from species in the family Poaceae (order Poales). Tricin occurs at low levels in some commelinid monocotyledon families outside the Poaceae, such as the Arecaceae (the palms, order Arecales) and Bromeliaceae (Poales), and the non-commelinid monocotyledon family Orchidaceae (Orchidales). One eudicotyledon was found to have tricin (Medicago sativa, Fabaceae). The content of lignin-integrated tricin is much higher than the extractable tricin level in all cases. Lignins, including waste lignin streams from biomass processing, could therefore provide a large and alternative source of this valuable flavone, reducing the costs, and encouraging studies into its application beyond its current roles.

Lignocellulose materials are potentially valuable resources for transformation into biofuels and bioproducts. However, their complicated structures make it difficult to fractionate them into cellulose, hemicelluloses, and lignin, which limits their utilization and economical conversion into value-added products. This study proposes a novel and feasible fractionation method based on complete dissolution of bagasse in 1-butyl-3-methylimidazolium chloride ([C(4)mim]Cl) followed by precipitation in acetone/water (9:1, v/v) and extraction with 3% NaOH solution. The ionic liquid [C(4)mim]Cl was easily recycled after concentration and treatment with acetonitrile. (1)H NMR analysis confirmed that there was no obvious difference between the recycled [C(4)mim]Cl and fresh material. Bagasse was fractionated with this method to 36.78% cellulose, 26.04% hemicelluloses, and 10.51% lignin, accounting for 47.17 and 33.85% of the original polysaccharides and 54.62% of the original lignin, respectively. The physicochemical properties of the isolated fractions were characterized by chemical analysis, high-performance anion exchange chromatography (HPAEC), gel permeation chromatography (GPC), Fourier transform infrared (FT-IR), and (1)H and 2D (13)C-(1)H correlation (HSQC) nuclear magnetic resonance spectroscopy. The results showed that the acetone-soluble lignin and alkaline lignin fractions had structures similar to those of milled wood lignin (MWL). The easy extraction of the noncellulose components from homogeneous bagasse solution and amorphous regenerated materials resulted in the relatively high purity of cellulosic fraction (>92%). The hemicellulosic fraction was mainly 4-O-methyl-D-glucuronoxylans with some α-L-arabinofuranosyl units substituted at C-2 and C-3.

Lignin is an abundant aromatic plant cell wall polymer consisting of phenylpropanoid units in which the aromatic rings display various degrees of methoxylation. Tricin [5,7-dihydroxy-2-(4-hydroxy-3,5-dimethoxyphenyl)-4H-chromen-4-one], a flavone, was recently established as a true monomer in grass lignins. To elucidate the incorporation pathways of tricin into grass lignin, the metabolites of maize (Zea mays) were extracted from lignifying tissues and profiled using the recently developed 'candidate substrate product pair' algorithm applied to ultra-high-performance liquid chromatography and Fourier transform-ion cyclotron resonance-mass spectrometry. Twelve tricin-containing products (each with up to eight isomers), including those derived from the various monolignol acetate and p-coumarate conjugates, were observed and authenticated by comparisons with a set of synthetic tricin-oligolignol dimeric and trimeric compounds. The identification of such compounds helps establish that tricin is an important monomer in the lignification of monocots, acting as a nucleation site for starting lignin chains. The array of tricincontaining products provides further evidence for the combinatorial coupling model of general lignification and supports evolving paradigms for the unique nature of lignification in monocots.Lignin is one of the major components in plant cell walls and is deposited predominantly in the walls of secondarily thickened cells. It is a complex phenylpropanoid polymer composed primarily of p-hydroxyphenyl (H), guaiacyl (G), and syringyl (S) units derived from the monolignols p-coumaryl 2H, coniferyl 2G, and sinapyl 2S alcohols, respectively (Fig. 1;Freudenberg and Neish, 1968). These monolignols are biosynthesized in the cytoplasm and translocated to the cell wall, where they are oxidized by laccases and peroxidases to monolignol radicals (Boerjan et al

Lignin oxidation offers ap otential sustainable pathway to oxygenated aromatic molecules.H owever,c urrent methods that use real lignin tend to have low selectivity and ay ield that is limited by lignin degradation during its extraction. We developed stoichiometric and catalytic oxidation methods using 2,3-dichloro-5,6-dicyano-1,4-benzoquinone (DDQ) as oxidant/catalyst to selectively deprotect the acetal and oxidizethe a-OH into aketone.The oxidized lignin was then depolymerized using af ormic acid/sodium formate system to produce aromatic monomers with a36mol %(in the case of stoichiometric oxidation) and 31 mol %(in the case of catalytic oxidation) yield (based on the original Klason lignin). The selectivity to as ingle product reached 80 %( syringyl propane dione,and 10-13 %toguaiacyl propane dione). These high yields of monomers and unprecedented selectivity are attributed to the preservation of the lignin structure by the acetal. 1015 Lausanne( Switzerland)

Lignin is a phenolic heteropolymer that is deposited in secondary-thickened cell walls, where it provides mechanical strength. A recent structural characterization of cell walls from monocot species showed that the flavone tricin is part of the native lignin polymer, where it is hypothesized to initiate lignin chains. In this study, we investigated the consequences of altered tricin levels on lignin structure and cell wall recalcitrance by phenolic profiling, nuclear magnetic resonance, and saccharification assays of the naturally silenced maize (Zea mays) C2-Idf (inhibitor diffuse) mutant, defective in the CHALCONE SYNTHASE Colorless2 (C2) gene. We show that the C2-Idf mutant produces highly reduced levels of apigenin-and tricin-related flavonoids, resulting in a strongly reduced incorporation of tricin into the lignin polymer. Moreover, the lignin was enriched in b-b and b-5 units, lending support to the contention that tricin acts to initiate lignin chains and that, in the absence of tricin, more monolignol dimerization reactions occur. In addition, the C2-Idf mutation resulted in strikingly higher Klason lignin levels in the leaves. As a consequence, the leaves of C2-Idf mutants had significantly reduced saccharification efficiencies compared with those of control plants. These findings are instructive for lignin engineering strategies to improve biomass processing and biochemical production.

No abstract