Caffeoyl shikimate esterase (CSE) was recently shown to play an essential role in lignin biosynthesis in Arabidopsis (Arabidopsis thaliana) and later in Medicago truncatula. However, the general function of this enzyme was recently questioned by the apparent lack of CSE activity in lignifying tissues of different plant species. Here, we show that down-regulation of CSE in hybrid poplar (Populus tremula 3 Populus alba) resulted in up to 25% reduced lignin deposition, increased levels of p-hydroxyphenyl units in the lignin polymer, and a relatively higher cellulose content. The transgenic trees were morphologically indistinguishable from the wild type. Ultra-high-performance liquid chromatography-mass spectrometry-based phenolic profiling revealed a reduced abundance of several oligolignols containing guaiacyl and syringyl units and their corresponding hydroxycinnamaldehyde units, in agreement with the reduced flux toward coniferyl and sinapyl alcohol. These trees accumulated the CSE substrate caffeoyl shikimate along with other compounds belonging to the metabolic classes of benzenoids and hydroxycinnamates. Furthermore, the reduced lignin amount combined with the relative increase in cellulose content in the CSE down-regulated lines resulted in up to 62% more glucose released per plant upon limited saccharification when no pretreatment was applied and by up to 86% and 91% when acid and alkaline pretreatments were used. Our results show that CSE is not only important for the lignification process in poplar but is also a promising target for the development of improved lignocellulosic biomass crops for sugar platform biorefineries.

SUMMARYBrachypodium distachyon (Brachypodium) has been proposed as a model for grasses, but there is limited knowledge regarding its lignins and no data on lignin-related mutants. The cinnamyl alcohol dehydrogenase (CAD) genes involved in lignification are promising targets to improve the cellulose-to-ethanol conversion process. Down-regulation of CAD often induces a reddish coloration of lignified tissues. Based on this observation, we screened a chemically induced population of Brachypodium mutants (Bd21-3 background) for red culm coloration. We identified two mutants (Bd4179 and Bd7591), with mutations in the BdCAD1 gene. The mature stems of these mutants displayed reduced CAD activity and lower lignin content. Their lignins were enriched in 8-O-4-and 4-O-5-coupled sinapaldehyde units, as well as resistant inter-unit bonds and free phenolic groups. By contrast, there was no increase in coniferaldehyde end groups. Moreover, the amount of sinapic acid ester-linked to cell walls was measured for the first time in a lignin-related CAD grass mutant. Functional complementation of the Bd4179 mutant with the wild-type BdCAD1 allele restored the wild-type phenotype and lignification. Saccharification assays revealed that Bd4179 and Bd7591 lines were more susceptible to enzymatic hydrolysis than wild-type plants. Here, we have demonstrated that BdCAD1 is involved in lignification of Brachypodium. We have shown that a single nucleotide change in BdCAD1 reduces the lignin level and increases the degree of branching of lignins through incorporation of sinapaldehyde. These changes make saccharification of cells walls pre-treated with alkaline easier without compromising plant growth.

Lignin is an abundant aromatic plant cell wall polymer consisting of phenylpropanoid units in which the aromatic rings display various degrees of methoxylation. Tricin [5,7-dihydroxy-2-(4-hydroxy-3,5-dimethoxyphenyl)-4H-chromen-4-one], a flavone, was recently established as a true monomer in grass lignins. To elucidate the incorporation pathways of tricin into grass lignin, the metabolites of maize (Zea mays) were extracted from lignifying tissues and profiled using the recently developed 'candidate substrate product pair' algorithm applied to ultra-high-performance liquid chromatography and Fourier transform-ion cyclotron resonance-mass spectrometry. Twelve tricin-containing products (each with up to eight isomers), including those derived from the various monolignol acetate and p-coumarate conjugates, were observed and authenticated by comparisons with a set of synthetic tricin-oligolignol dimeric and trimeric compounds. The identification of such compounds helps establish that tricin is an important monomer in the lignification of monocots, acting as a nucleation site for starting lignin chains. The array of tricincontaining products provides further evidence for the combinatorial coupling model of general lignification and supports evolving paradigms for the unique nature of lignification in monocots.Lignin is one of the major components in plant cell walls and is deposited predominantly in the walls of secondarily thickened cells. It is a complex phenylpropanoid polymer composed primarily of p-hydroxyphenyl (H), guaiacyl (G), and syringyl (S) units derived from the monolignols p-coumaryl 2H, coniferyl 2G, and sinapyl 2S alcohols, respectively (Fig. 1;Freudenberg and Neish, 1968). These monolignols are biosynthesized in the cytoplasm and translocated to the cell wall, where they are oxidized by laccases and peroxidases to monolignol radicals (Boerjan et al

Lignin is a phenolic heteropolymer that is deposited in secondary-thickened cell walls, where it provides mechanical strength. A recent structural characterization of cell walls from monocot species showed that the flavone tricin is part of the native lignin polymer, where it is hypothesized to initiate lignin chains. In this study, we investigated the consequences of altered tricin levels on lignin structure and cell wall recalcitrance by phenolic profiling, nuclear magnetic resonance, and saccharification assays of the naturally silenced maize (Zea mays) C2-Idf (inhibitor diffuse) mutant, defective in the CHALCONE SYNTHASE Colorless2 (C2) gene. We show that the C2-Idf mutant produces highly reduced levels of apigenin-and tricin-related flavonoids, resulting in a strongly reduced incorporation of tricin into the lignin polymer. Moreover, the lignin was enriched in b-b and b-5 units, lending support to the contention that tricin acts to initiate lignin chains and that, in the absence of tricin, more monolignol dimerization reactions occur. In addition, the C2-Idf mutation resulted in strikingly higher Klason lignin levels in the leaves. As a consequence, the leaves of C2-Idf mutants had significantly reduced saccharification efficiencies compared with those of control plants. These findings are instructive for lignin engineering strategies to improve biomass processing and biochemical production.

BackgroundCaffeoyl shikimate esterase (CSE) was recently characterized as an enzyme central to the lignin biosynthetic pathway in Arabidopsis thaliana. The cse-2 loss-of-function mutant shows a typical phenotype of lignin-deficient mutants, including collapsed vessels, reduced lignin content, and lignin compositional shift, in addition to a fourfold increase in cellulose-to-glucose conversion when compared to the wild type. However, this mutant exhibits a substantial developmental arrest, which might outweigh the gains in fermentable sugar yield. To restore its normal growth and further improve its saccharification yield, we investigated a possible cause for the yield penalty of the cse-2 mutant. Furthermore, we evaluated whether CSE expression is under the same multi-leveled transcriptional regulatory network as other lignin biosynthetic genes and analyzed the transcriptional responses of the phenylpropanoid pathway upon disruption of CSE.ResultsTransactivation analysis demonstrated that only second-level MYB master switches (MYB46 and MYB83) and lignin-specific activators (MYB63 and MYB85), but not top-level NAC master switches or other downstream transcription factors, effectively activate the CSE promoter in our protoplast-based system. The cse-2 mutant exhibited transcriptional repression of genes upstream of CSE, while downstream genes were mainly unaffected, indicating transcriptional feedback of CSE loss-of-function on monolignol biosynthetic genes. In addition, we found that the expression of CSE under the control of the vessel-specific VND7 promoter in the cse-2 background restored the vasculature integrity resulting in improved growth parameters, while the overall lignin content remained relatively low. Thus, by restoring the vascular integrity and biomass parameters of cse-2, we further improved glucose release per plant without pretreatment, with an increase of up to 36 % compared to the cse-2 mutant and up to 154 % compared to the wild type.ConclusionsOur results contribute to a better understanding of how the expression of CSE is regulated by secondary wall-associated transcription factors and how the expression of lignin genes is affected upon CSE loss-of-function in Arabidopsis. Moreover, we found evidence that vasculature collapse is underlying the yield penalty found in the cse-2 mutant. Through a vessel-specific complementation approach, vasculature morphology and final stem weight were restored, leading to an even higher total glucose release per plant.Electronic supplementary materialThe online version of this article (doi:10.1186/s13068-016-0551-9) contains supplementary material, which is available to authorized users.

In grasses, leaf growth is often monitored to gain insights in growth processes, biomass accumulation, regrowth after cutting, etc. To study the growth dynamics of the grass leaf, its length is measured at regular time intervals to derive the leaf elongation rate (LER) profile over time. From the LER profile, parameters such as maximal LER and leaf elongation duration (LED), which are essential for detecting inter-genotype growth differences and/or quantifying plant growth responses to changing environmental conditions, can be determined. As growth is influenced by the circadian clock and, especially in grasses, changes in environmental conditions such as temperature and evaporative demand, the LER profiles show considerable experimental variation and thus often do not follow a smooth curve. Hence it is difficult to quantify the duration and timing of growth. For these reasons, the measured data points should be fitted using a suitable mathematical function, such as the beta sigmoid function for leaf elongation.In the context of high-throughput phenotyping, we implemented the fitting of leaf growth measurements into a user-friendly Microsoft Excel-based macro, a tool called LEAF-E. LEAF-E allows to perform non-linear regression modeling of leaf length measurements suitable for robust and automated extraction of leaf growth parameters such as LER and LED from large datasets. LEAF-E is particularly useful to quantify the timing of leaf growth, which forms an important added value for detecting differences in leaf growth development. We illustrate the broad application range of LEAF-E using published and unpublished data sets of maize, Miscanthus spp. and Brachypodium distachyon, generated in independent experiments and for different purposes. In addition, we show that LEAF-E could also be used to fit datasets of other growth-related processes that follow the sigmoidal profile, such as cell length measurements along the leaf axis.Given its user-friendliness, ability to quantify duration and timing of leaf growth and broad application range, LEAF-E is a tool that could be routinely used to study growth processes following the sigmoidal profile.Electronic supplementary materialThe online version of this article (doi:10.1186/1746-4811-10-37) contains supplementary material, which is available to authorized users.

SummaryIncreased biomass yield and quality are of great importance for the improvement of feedstock for the biorefinery. For the production of bioethanol, both stem biomass yield and the conversion efficiency of the polysaccharides in the cell wall to fermentable sugars are of relevance. Increasing the endogenous levels of gibberellic acid (GA) by ectopic expression of GA20‐OXIDASE1 (GA20‐OX1), the rate‐limiting step in GA biosynthesis, is known to affect cell division and cell expansion, resulting in larger plants and organs in several plant species. In this study, we examined biomass yield and quality traits of maize plants overexpressing GA20‐OX1 (GA20‐OX1). GA20‐OX1 plants accumulated more vegetative biomass than control plants in greenhouse experiments, but not consistently over two years of field trials. The stems of these plants were longer but also more slender. Investigation of GA20‐OX1 biomass quality using biochemical analyses showed the presence of more cellulose, lignin and cell wall residue. Cell wall analysis as well as expression analysis of lignin biosynthetic genes in developing stems revealed that cellulose and lignin were deposited earlier in development. Pretreatment of GA20‐OX1 biomass with NaOH resulted in a higher saccharification efficiency per unit of dry weight, in agreement with the higher cellulose content. On the other hand, the cellulose‐to‐glucose conversion was slower upon HCl or hot‐water pretreatment, presumably due to the higher lignin content. This study showed that biomass yield and quality traits can be interconnected, which is important for the development of future breeding strategies to improve lignocellulosic feedstock for bioethanol production.

Lignocellulosic biomass is an abundant byproduct from cereal crops that can potentially be valorized as a feedstock to produce biomaterials. Zea mays CINNAMYL ALCOHOL DEHYDROGENASE 2 (ZmCAD2) is involved in lignification, and is a promising target to improve the cellulose-to-glucose conversion of maize stover. Here, we analyzed a field-grown zmcad2 Mutator transposon insertional mutant. Zmcad2 mutant plants had an 18% lower Klason lignin content, whereas their cellulose content was similar to that of control lines. The lignin in zmcad2 mutants contained increased levels of hydroxycinnamaldehydes, i.e. the substrates of ZmCAD2, ferulic acid and tricin. Ferulates decorating hemicelluloses were not altered. Phenolic profiling further revealed that hydroxycinnamaldehydes are partly converted into (dihydro)ferulic acid and sinapic acid and their derivatives in zmcad2 mutants. Syringyl lactic acid hexoside, a metabolic sink in CAD-deficient dicot trees, appeared not to be a sink in zmcad2 maize. The enzymatic cellulose-to-glucose conversion efficiency was determined after 10 different thermochemical pre-treatments. Zmcad2 yielded significantly higher conversions compared with controls for almost every pre-treatment. However, the relative increase in glucose yields after alkaline pre-treatment was not higher than the relative increase when no pre-treatment was applied, suggesting that the positive effect of the incorporation of hydroxycinnamaldehydes was leveled off by the negative effect of reduced p-coumarate levels in the cell wall. Taken together, our results reveal how phenolic metabolism is affected in CAD-deficient maize, and further support mutating CAD genes in cereal crops as a promising strategy to improve lignocellulosic biomass for sugar-platform biorefineries.