Purpose This report proposes a life-cycle analysis (LCA)-oriented methodology for systematic inventory analysis of the use phase of manufacturing unit processes providing unit process datasets to be used in life-cycle inventory (LCI) databases and libraries. The methodology has been developed in the framework of the CO 2 PE! collaborative research programme (CO2PE! 2011a) and comprises two approaches with different levels of detail, respectively referred to as the screening approach and the in-depth approach. Methods The screening approach relies on representative, publicly available data and engineering calculations for energy use, material loss, and identification of variables for improvement, while the in-depth approach is subdivided into four modules, including a time study, a power consumption study, a consumables study and an emissions study, in which all relevant process in-and outputs are measured and analysed in detail. The screening approach provides the first insight in the unit process and results in a set of approximate LCI data, which also serve to guide the more detailed and complete in-depth approach leading to more accurate LCI data as well as the identification of potential for energy and resource efficiency improvements of the manufacturing unit process. To ensure optimal Responsible editor: Martin Baitz Preamble. The CO 2 PE! UPLCI-Initiative aims to document and improve the environmental impact created during the use phase of a wide range of discrete part manufacturing processes. This article is the first of two and describes the developed methodology comprising two approaches with different levels of detail. The second paper provides for both approaches a case study of the Life Cycle Inventory step.Electronic supplementary material The online version of this article (

No abstract

Graphical abstract

Industrial X-ray computed tomography (XCT) is seen as a potentially effective tool for industrial inspection of complex parts. In particular, XCT is an attractive solution for the measurement of internal geometries, which are inaccessible by conventional coordinate measuring systems (CMSs). While the technology is available and the benefits are recognized, methods to establish measurement assurance of XCT systems are lacking. More specifically, assessment of measurement uncertainty and the subsequent establishment of measurement traceability is a largely unknown process. This paper is a review of research that contributes to the development of a geometrical calibration procedure for XCT systems. A brief introduction to the geometry of cone-beam tomography systems is given, after which the geometrical influence factors are outlined. Mathematical measurement models play a significant role in understanding how geometrical offsets and misalignments contribute to error in measurements; therefore, the application of mathematical models in simulating geometrical errors is discussed and the corresponding literature is presented. Then, the various methods that have been developed to measure certain geometrical errors are reviewed. The findings from this review are discussed and suggestions are provided for future work towards the development of a comprehensive and practical geometrical calibration procedure.

Abstract

No abstract

No abstract

No abstract