ResumoA siderurgia gera grandes volumes de escória de aciaria como coproduto e precisa incrementar o aproveitamento desse material em novos processos para evitar a disposição em aterros, aumentando a competitividade do setor. Este estudo tem como objetivo caracterizar a escória de aciaria LD da Usiminas em Ipatinga-MG, buscando avaliar o seu potencial para uso como corretivo agrícola e fonte de nutrientes para agricultura. Foram utilizadas técnicas analíticas tradicionais e microscopia para determinar suas principais características. Os resultados mostraram que uma etapa a mais de separação por peneira (2 mm) no processo rotineiro de remoção de metálicos é possível produzir um produto com características químicas e granulométricas estáveis para se constituir um corretivo agrícola comercial. O material apresenta características superiores aos corretivos tradicionais, pois além de corrigir o pH, fornece nutrientes importantes para a agricultura. O processo mais lento de hidratação dos silicatos e de liberação dos nutrientes pode ser interessante para o fornecimento progressivo desses compostos dando longevidade ao corretivo, reduzindo potencialmente o custo de aplicação. Palavras-chave: Escória LD; Corretivo agrícola; Escória de aciaria; Resíduos siderúrgicos LD SLAG AS SOIL ACIDITY CORRECTIVE Abstract Steelmaking industry generates large volumes of LD slag as co-product and needs to increase their usage to avoid landfilling, increasing the sector's competitiveness. The aim of this study is to characterize LD slag from Ipatinga site of Usiminas in order to evaluate its potential as soil acidity corrective and as source of nutrient in agriculture. It was used traditional analytical methods and microscopy to extract main features of LD slag. Additional separation process using a 2 mm sieve in ordinary process of metal removal from slag can be possible to produce a commercial product with adequate chemistry and stable particle size distribution to be used as soil acidity corrective. In addition, this product can be an important source of nutrients for plants. The slow kinetics of silicates hydration, with a gradual release of nutrients, should be interesting for increasing the longevity of the corrective, potentially reducing application costs.
Steelmaking slag (SS) is one of the largest generation waste in the integrated and semi-integrated plants, but it has application restrictions due to its high expansibility. To overcome these constraints, this research had as its main objective the reactions is kinetics parameters estimation that result in the expansion of SS using the Arrhenius global equation. It was obtained 12.5 kJ/mol for activation energy and 260.42% for the pre-exponential factor. It was also noted that the temperature significantly impacts the final expansion values, increasing them exponentially. Furthermore the time of expansion of the slag obey an asymptotic equation (Exp = a -b.c t ) whose results presented initially having a large expansion velocity, which tends to zero at times very long when the material has stabilized.
A review of the importance of controlling the aluminium content in liquid steel is made, and the various methods used for the determination of soluble aluminium are discussed. A recently developed and patented instrument, using a special electrolysis cell for rapid dissolution of the solid steel samples, and a computer‐controlled flow injection analyzer (FIA) also developed to produce results directly in % concentration, are described. Typical analysis time for duplicate determination is 150 s. Accuracy ranges from 0.003 to 0.005% in the range from 0.005 to 0.300% sol. aluminium in steel.
Resumo A geração de escória de aciaria (EAC) nas siderúrgicas é bastante significativa. Atualmente, na Usiminas, apenas 2,5% do agregado siderúrgico é vendido para a indústria cimenteira. Este trabalho visou caracterizar a escória e avaliar seu incremento na substituição à escória de alto-forno (EAF) na mistura do clínquer. Foram testados dois tipos de EAC e duas receitas distintas. As principais fases encontradas foram a larnita, portlandita, calcita, cal, ferritadicálcio e wustita, sendo a larnita em maior proporção. O teor de amorfo das amostras de EAC foi baixo, entre 24 e 30%. No entanto, a atividade pozolânica ficou acima de 75%. As amostras EAC não apresentaram diferença estatística significativa nos resultados de resistência à compressão em relação à referência, apresentando em alguns casos, ganho para os níveis de substituição (6 e 10%) após 180 dias de cura. Entre as receitas avaliadas, os maiores valores obtidos de resistência à compressão foram os da receita com maior proporção de EAF. Os resultados também mostraram que a resistência à compressão aumentou com o tempo de cura com tendência de estabilização após 180 dias. O estudo mostrou que é possível aumentar o percentual de uso de EAC substituindo a EAF na fabricação de cimento. Palavras-chave:Escória de Convertedor; Aplicação; Cimento.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.