These preliminary results support body CT dose index reductions of 32-65% when adaptive statistical iterative reconstruction is used. Studies with larger statistical samples are needed to confirm these findings.

Digital imaging provides an effective means to electronically acquire, archive, distribute, and view medical images. Medical imaging display stations are an integral part of these operations. Therefore, it is vitally important to assure that electronic display devices do not compromise image quality and ultimately patient care. The AAPM Task Group 18 (TG18) recently published guidelines and acceptance criteria for acceptance testing and quality control of medical display devices. This paper is an executive summary of the TG18 report. TG18 guidelines include visual, quantitative, and advanced testing methodologies for primary and secondary class display devices. The characteristics, tested in conjunction with specially designed test patterns (i.e., TG18 patterns), include reflection, geometric distortion, luminance, the spatial and angular dependencies of luminance, resolution, noise, glare, chromaticity, and display artifacts. Geometric distortions are evaluated by linear measurements of the TG18-QC test pattern, which should render distortion coefficients less than 2%/5% for primary/secondary displays, respectively. Reflection measurements include specular and diffuse reflection coefficients from which the maximum allowable ambient lighting is determined such that contrast degradation due to display reflection remains below a 20% limit and the level of ambient luminance (Lamb) does not unduly compromise luminance ratio (LR) and contrast at low luminance levels. Luminance evaluation relies on visual assessment of low contrast features in the TG18-CT and TG18-MP test patterns, or quantitative measurements at 18 distinct luminance levels of the TG18-LN test patterns. The major acceptable criteria for primary/ secondary displays are maximum luminance of greater than 170/100 cd/m2, LR of greater than 250/100, and contrast conformance to that of the grayscale standard display function (GSDF) of better than 10%/20%, respectively. The angular response is tested to ascertain the viewing cone within which contrast conformance to the GSDF is better than 30%/60% and LR is greater than 175/70 for primary/secondary displays, or alternatively, within which the on-axis contrast thresholds of the TG18-CT test pattern remain discernible. The evaluation of luminance spatial uniformity at two distinct luminance levels across the display faceplate using TG18-UNL test patterns should yield nonuniformity coefficients smaller than 30%. The resolution evaluation includes the visual scoring of the CX test target in the TG18-QC or TG18-CX test patterns, which should yield scores greater than 4/6 for primary/secondary displays. Noise evaluation includes visual evaluation of the contrast threshold in the TG18-AFC test pattern, which should yield a minimum of 3/2 targets visible for primary/secondary displays. The guidelines also include methodologies for more quantitative resolution and noise measurements based on MTF and NPS analyses. The display glare test, based on the visibility of the low-contrast targets of the TG18-GV test pattern or...

The ASIR reconstruction algorithm is a promising technique for providing diagnostic quality CT images at significantly reduced radiation doses.

Compared with routine-dose CT with FBP, abdominal low-dose CT with ASIR significantly reduces noise, thereby permitting diagnostic abdominal examinations with lower (by 23-66%) radiation doses. Despite reduced image sharpness in average and small patients, low-dose CT with ASIR had diagnostic acceptability comparable to that of routine-dose CT with FBP.

No abstract

Computed tomography (CT) is an imaging test that is widely used worldwide to establish medical diagnoses and perform image-guided interventions. More recently, concern has been raised about the risk of carcinogenesis from medical radiation, with a focus on CT. The purpose of this article is to (a) describe the importance of educating radiology personnel, patients, and referring clinicians about the concerns over CT radiation, (b) describe commonly used CT parameters and radiation units, (c) discuss the importance of establishing a dedicated radiology team to manage CT radiation, and (d) describe specific CT techniques to minimize radiation while providing diagnostic examinations.

Sixty-five patients were examined with magnetic resonance imaging (MR) to determine what combination of operator-selectable controls would result in a thorough examination of the intervertebral disks. There were 20 normal subjects, 8 with degenerative lumbar disk disease, 27 with both degeneration and herniation, 5 with stenosis of the spinal canal, and 5 with disk space infection. T2 was significantly longer in the normal nucleus pulposus than in the degenerated disk. Based on plots of in vivo signal intensity vs. repetition time (TR) for various echo times (TE), a sagittal 30-msec. TE and a 0.25-sec. TR were used for anatomical delineation and rapid localization, while sagittal and/or axial 120-msec. TE/3-sec. TR images were used to evaluate the cerebrospinal fluid and disk. Comparison with radiographs, high-resolution CT scans, and myelograms showed that MR was the most sensitive for identification of degeneration and disk space infection, separating the normal nucleus pulposus from the annulus and degenerated disk. Herniation, stenosis of the canal, and scarring can be identified as accurately with MR as with CT or myelography.

No abstract