Optical phantoms are widely used for evaluating the performance of biomedical optical modalities, and hence, absorbing and scattering materials are required for the construction of optical phantoms. Towards that aim, new readily available and inexpensive black Ink (Parker) as a simulating absorber as well as Intralipid 20% as a simulating scatterer are thoroughly investigated. Broadband Transmittance and Diffuse reflectance spectroscopic measurements were performed in the visible range 400 -700 nm. Optical properties of the phantom materials are determined. Analytical expressions for absorption and scattering coefficient related to the concentrations and wavelength of the Parker ink and Intralipid are also presented and discussed. The results show nonlinear trend in the absorption coefficient of Parker ink over the examined visible spectral range. Furthermore, Intralipid scattering coefficient variation across the mentioned spectral range shows a tissue-like scattering trend. The findings demonstrate the capability of the broadband transmission and diffuse reflectance for characterizing tissue-like phantom materials in the examined spectral range.
Introduction: The purpose of this project is to develop a mathematical model to investigate light distribution and study effective parameters such as laser power and irradiated time to get the optimal laser dosage to control hyperthermia. This study is expected to have a positive impact and a better simulation on laser treatment planning of biological tissues. Moreover, it may enable us to replace animal tests with the results of a COMSOL predictive model. Methods: We used in this work COMSOL5 model to simulate the light diffusion and bio-heat equation of the mouse tissue when irradiated by 980 nm laser diode and the effect of different parameters (laser power, and irradiated time) on the surrounding tissue of the tumor treatment in order to prevent damage from excess heat Results: The model was applied to study light propagation and several parameters (laser power, irradiated time) and their impact on light-heat distribution within the tumor in the mouse back tissue The best result is at laser power 0.5 W and time irradiation 0.5 seconds in order to get the maximum temperature hyperthermia at 52°C. Conclusion:The goal of this study is to simulate a mouse model to control excess heating of tissue and reduce the number of animals in experimental research to get the best laser parameters that was safe for use in living animals and in human subjects.
The aim of this study is to characterize the optical properties of Intralipid20% using two methods modified Kubelka-Munk model and Mie theory and to test the applicability of a modified Kubelka-Munk model with a single integrating sphere system over a wide wavelength range 470 – 725nm. Scattering coefficients which estimated by these two methods were matched and the absorption effect was observed and quantified. Finally, the imaginary part of the refractive index was estimated besides scattering, absorption and anisotropy coefficients. Full Text: PDF ReferencesB.W. Pogue, and M.S. Patterson, "Review of tissue simulating phantoms for optical spectroscopy, imaging and dosimetry", J. Biomed. Opt. 11, 4(2006). CrossRef J. Hwang, C. Ramella-Roman, and R. Nordstrom, "Introduction: Feature Issue on Phantoms for the Performance Evaluation and Validation of Optical Medical Imaging Devices", Biomed. Opt. Express. 3, 6(2012). CrossRef P. Ninni, F. Martelli, and G. Zaccanti, "Intralipid: towards a diffusive reference standard for optical tissue phantoms", Phys. Med. Biol 56, 2(2011). CrossRef S. Flock, S. Jacques, B. Wilson, W. Star, and J.C. van Gemert, "Optical properties of intralipid: A phantom medium for light propagation studies", Lasers. Surg. Med 4, 12(1992). CrossRef R. Michels, F. Foschum, and A. Kienle, "Optical properties of fat emulsions", Opt. Express. 16, 8(2008). CrossRef L. Spinelli et al. "Calibration of scattering and absorption properties of a liquid diffusive medium at NIR wavelengths. Time-resolved method", Opt. Express. 15, 11(2007). CrossRef L. Spinelli et al. "Determination of reference values for optical properties of liquid phantoms based on Intralipid and India ink", Biomed. Opt. Express. 5, 7(2014). CrossRef H. van Staveren, C. Moes, J. van Marle, S. Prahl, and J. van Gemert, "Light scattering in lntralipid-10% in the wavelength range of 400–1100 nm", Appl. Opt. 30, 31(1991). CrossRef B. Wilson, M. Patterson, and S. Flock, "Indirect versus direct techniques for the measurement of the optical properties of tissues", Photochem. Photobiol. 46, 5(1987). CrossRef H. Soleimanzad, H. Gurden, and F. Pain, "Optical properties of mice skull bone in the 455- to 705-nm range", J. Biomed. Opt. 22, 1(2017). CrossRef C. Holmer et al. "Optical properties of adenocarcinoma and squamous cell carcinoma of the gastroesophageal junction", J. Biomed. Opt. 12, 1(2007). CrossRef S. Thennadil, "Relationship between the Kubelka–Munk scattering and radiative transfer coefficients", OSA. 25, 7(2008). CrossRef L. Yang, and B. Kruse, "Qualifying the arguments used in the derivation of the revised Kubelka–Munk theory: reply", OSA. 21, 10(2004). CrossRef W. Vargas, and G. Niklasson, "Applicability conditions of the Kubelka–Munk theory", Appl. Opt. 36, 22(1997). CrossRef A. Krainov, A. Mokeeva, E. Segeeva, P. Agrba, and M. Kirillin, "Optical properties of mouse biotissues and their optical phantoms", Opt. Spec. 115, 2(2013). CrossRef H.C. van de Hulst, Light Scattering by Small Particles. (New York, Dover Publication 1981). CrossRef C. Matzler, Matlab Functions for Mie Scattering and Absorption. (Bern, Bern university 2002). DirectLink C. Matzler, Matlab Functions for Mie Scattering and Absorption, version 2 (Bern, Bern university 2002). DirectLink G. Segelstein, The complex refractive index of water [dissertation]. (Kansas, university of Missouri-Kansas city 1981). DirectLink A. Shahin, and W. Bachir, Pol. J. Med. Phys. Eng. 21, 4(2017). CrossRef
Debonding of the ceramic brackets with the aid of laser technology has become a certified technique in the field of orthodontics, as the use of a laser eliminates the problems of debonding that are associated with the traditional method. These problems may include enamel cracking and broken ceramic brackets, as well as the pain experienced by the patient during the removal of ceramic brackets [1]. Moreover, the use of a laser reduced the efforts and time needed for brackets debonding through thermal annealing of orthodontic brackets [2]. However, the effects of different lasers on the teeth and pulp tissue have not been fully determined. AbstractBackground. Deboning of ceramic brackets using a Er:YAG laser has become an acceptable method to facilitate the removal of such type of brackets. Therefore, research has been conducted to establish safer and more effective techniques. The pulse duration is one of the most critical parameters with respect to thermal effect on the pulp vitality. Objectives. The goal of the current research is to evaluate the thermal effect of different Er:YAG laser pulse durations in order to establish safe and effective protocols of debonding ceramic brackets. Material and Methods. The sample consisted of 45 premolars extracted for orthodontic purposes. A ceramic bracket was bonded to each tooth. The sample was divided into three groups: 15 teeth for pulse duration of 50 µs, 15 teeth for pulse duration of 100 µs, and 15 teeth for pulse duration of 300 µs. All the ceramic brackets were exposed to the Er:YAG laser for 6 s by laser scanning method, with the same air and water conditions, as well as the same pulse energy and repetition rate. The tooth temperature was monitored during debonding the brackets by a thermal camera, and the ceramic bracket was debonded after 18 s. Then, the samples were examined under a microscope to evaluate the presence of the adhesive material. Results. The results showed the absence of a statistically significant difference between the pulse duration of 50, 100 and 300 µs in relation to the rise in temperature of the tooth. However, a statistically significant difference was found in relation to the presence of adhesive materials between pulse duration 50 µs and both 100 and 300 µs, with no statistically significant difference between 100 and 300 µs. Conclusions. Within the limits of this study, both Er: YAG pulse durations of 100 and 300 µs are preferred during ceramic brackets debonding using the laser scanning method (Dent. Med. Probl. 2016, 53, 3, 352-357).
Estimating tissue hypoxia using diffuse reflectance spectroscopy has been a tough challenge. In this work, a novel approach for extracting tissue oxygen saturation (StO2) from diffuse reflectance spectra is presented. The devised method is based on the second derivative of visible light diffuse reflectance of tissue over 100 nm ranged from 500 nm to 600 nm. The theoretical predictions of the method were confirmed by estimating StO2 from simulated diffuse reflectance generated by Monte Carlo based look-up tables. Effect of scattering and blood volume fraction on the StO2 estimation are quantified. Validation was also tested on clinical measurements from oral mucosal tissue. The devised second derivative Diffuse reflectance spectroscopy (SD-DRS) shows a potential application for detecting tumor hypoxia, in particular, the differentiation between healthy and cancerous tissue.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.