No abstract

Intense axisymmetric oscillations driven by suprathermal ions injected in the direction counter to the toroidal plasma current are observed in the DIII-D tokamak. The modes appear at nearly half the ideal geodesic acoustic mode frequency, in plasmas with comparable electron and ion temperatures and elevated magnetic safety factor (q_{min}>or=2). Strong bursting and frequency chirping are observed, concomitant with large (10%-15%) drops in the neutron emission. Large electron density fluctuations (n[over ]_{e}/n_{e} approximately 1.5%) are observed with no detectable electron temperature fluctuations, confirming a dominant compressional contribution to the pressure perturbation as predicted by kinetic theory. The observed mode frequency is consistent with a recent theoretical prediction for the energetic-particle-driven geodesic acoustic mode.

In the absence of any auxiliary torque input, the DIII-D plasma consists of nonzero toroidal angular momentum, in other words, it rotates. This effect is commonly observed in tokamaks, being referred to as intrinsic rotation. Measurements of intrinsic rotation profiles have been made in DIII-D ͓J. Luxon, Nucl. Fusion 42, 614 ͑2002͔͒ H-mode discharges, with both Ohmic heating ͑OH͒ and electron cyclotron heating ͑ECH͒ in which there is no auxiliary torque. Recently, the H-mode data set has been extended with the newly configured DIII-D simultaneous co-and counter-directed neutral beam injection ͑NBI͒ capability resulting in control of the local torque deposition, where co and counter refer to the direction relative to the toroidal plasma current. Understanding intrinsic rotation is important for projection toward burning plasma performance where any NBI torque will be relatively small. The toroidal velocity is recognizably important regarding issues of stability and confinement. In DIII-D ECH H-modes the rotation profile is hollow, co-directed at large minor radius and depressed, or actually counter-directed, nearer the magnetic axis. This profile varies with the ECH power deposition profile to some extent. In contrast, OH H-modes have a relatively flat co-directed rotation profile. There is a scaling of the DIII-D intrinsic toroidal velocity with W / I p , as seen in intrinsic rotation in Alcator C-Mod ͓J. Rice, Nucl. Fusion 39, 1175 ͑1999͔͒, where W is the total plasma thermal energy and I p is the magnitude of the toroidal plasma current. This common scaling resulted in a dimensionless similarity experiment between DIII-D and Alcator C-Mod on intrinsic rotation, obtaining a single spatial point match in the toroidal velocity normalized to the ion thermal velocity. The balanced NBI capability in DIII-D is a useful tool to push scaling studies to higher values of the plasma normalized energy, notwithstanding the details of torque deposition for co-NBI versus counter-NBI. There are theories which address intrinsic rotation, both extensions of neoclassical theory and related to turbulent transport. At this time, the comparisons with theory are qualitative.

Recent QH-mode research on DIII-D [J. L. Luxon et al., Plasma Physics and Controlled Nuclear Fusion Research 1996 (International Atomic Energy Agency, Vienna, 1987), Vol. I, p. 159] has used the peeling-ballooning modes model of edge magnetohydrodynamic stability as a working hypothesis to organize the data; several predictions of this theory are consistent with the experimental results. Current ramping results indicate that QH modes operate near the edge current limit set by peeling modes. This operating point explains why QH mode is easier to get at lower plasma currents. Power scans have shown a saturation of edge pressure with increasing power input. This allows QH-mode plasmas to remain stable to edge localized modes (ELMs) to the highest powers used in DIII-D. At present, the mechanism for this saturation is unknown; if the edge harmonic oscillation (EHO) is playing a role here, the physics is not a simple amplitude dependence. The increase in edge stability with plasma triangularity predicted by the peeling-ballooning theory is consistent with the substantial improvement in pedestal pressure achieved by changing the plasma shape from a single null divertor to a high triangularity double null. Detailed ELITE calculations for the high triangularity plasmas have demonstrated that the plasma operating point is marginally stable to peeling-ballooning modes. Comparison of ELMing, coinjected and quiescent, counterinjected discharges with the same shape, current, toroidal field, electron density, and electron temperature indicates that the edge radial electric field or the edge toroidal rotation are also playing a role in edge stability. The EHO produces electron, main ion, and impurity particle transport at the plasma edge which is more rapid than that produced by ELMs under similar conditions. The EHO also decreases the edge rotation while producing little change in the edge electron and ion temperatures. Other edge electromagnetic modes also produce particle transport; this includes the incoherent, broadband activity seen at high triangularity. Pedestal values of ν* and βT bracketing, those required for International Experimental Thermonuclear Reactor [Nucl. Fusion 39, 2137 (1999)] have been achieved in DIII-D, demonstrating the QH-mode edge densities are sufficient for future devices.

The application of static, non-axisymmetric, nonresonant magnetic fields (NRMFs) to high beta DIII-D plasmas has allowed sustained operation with a quiescent H-mode (QH-mode) edge and both toroidal rotation and neutral beam injected torque near zero. Previous studies have shown that QH-mode operation can be accessed only if sufficient radial shear in the plasma flow is produced near the plasma edge. In past experiments, this flow shear was produced using neutral beam injection (NBI) to provide toroidal torque. In recent experiments, this torque was nearly completely replaced by the torque from applied NRMFs. The application of the NRMFs does not degrade the global energy confinement of the plasma. Conversely, the experiments show that the energy confinement quality increases with lower plasma rotation. Furthermore, the NRMF torque increases plasma resilience to locked modes at low rotation. These results open a path towards QH-mode utilization as an edge-localized mode (ELM)-stable H-mode in the self-heated burning plasma scenario, where toroidal momentum input from NBI may be small or absent.