No abstract

No abstract

Chassis mounted structure is a base component for shelters or containers mounted on heavy transport vehicles. When the vehicle is driven in rough terrains or during off-road transportation this structure has a significant role in protecting the sophisticated cargo and intelligent tracking systems placed inside the shelters. During off-road transportation or warhead conditions the vehicle is subjected to large unevenness in load due to road or soil irregularities in rough terrains, which causes vibrations to be induced in the vehicle. As the nature of vibrations induced in vehicle during travel on off-road or cross-country terrains is random and unpredictable, there is a concern to analyse the vibration response of chassis and chassis mounted structures is needed. Present work deals with vibration measurement and spectral analysis of a chassis mounted structure designed for off-road and commercial transport vehicles. The road profile on which the vibration measurement has been carried out includes paved road and cross-country terrain segments. The vibration measurement has been carried at three different vehicle speeds. Signal analysis procedure for the acquired test data is discussed. The chassis mounted structure under concern is intended to hold two shelters or containers. From the vibration measurement at critical locations, g-(RMS) and g-(peak) values for paved and cross-country roads have been found out. Power spectral density values have also been found on chassis and structure for the same transport situations. Major inferences include the evaluation of minimum and maximum g-values (peak and RMS) on chassis and chassis mounted structure. Power spectral density graphs are constructed from which the dominant frequency for both road profiles is found out.

No abstract

Chassis mounted platform is an intermediate component between vehicle chassis and chassis mounted shelter, and is intended to act as a levelled base for shelters. Shelters in combat vehicles provide a closed stipulated environment to computerized tracking systems, sophisticated defense combat equipments to suit the operational and environmental requirements during warhead situations. Platform carries transfers and sustains unevenness in load arising from the road or soil irregularities during off-road vehicle travel. Present work deals with development, evaluation and improvement of one such platform for 8x8 vehicles. In this work, the platform under consideration is designed to accommodate two shelters, each being secured to the platform using standard twist locking arrangements. Securing locations are dependent on the size and weight of the commodity to be placed inside shelter. Major design ruminations of the platform include nature and pattern of load, flange orientations of channel sections, span between webs of consecutive channels, axle load distribution and vehicle geometry constraints as ground clearance and departure angle. Finite element analysis is carried out in to order evaluate stress and deflection in the present platform configuration. Experimental strain measurement at critical locations on the platform is carried at Automotive Research Association of India (ARAI) to evaluate the performance of the platform under specified load-speed conditions. Relation between experimental stress values and strain gauge locations on the platform is assessed for different load magnitudes.

This paper deals with the design evaluation of chassis integrated structure intended to carry tractor trolleys. This structure is either bolted along with tractor trailer chassis or attached to the trolley using special attachments. Such structure is located in between the trolley chassis and tractor trolley. The role of this structure is to provide a support to the trolley during transportation in agricultural terrains. This structure transmits and upholds the load variations during tractor travel in agricultural terrains. Present work deals with design evaluation of one such structure. In this work, the structure under consideration is designed to house and support one axle semi-trailer trolley. Locations of attachment of the structure to the chassis or trolley depend upon the weight and size restrictions mentioned in Indian Standards. Major design considerations for the structure include height of the semi-trailer trolley, nature of load or cargo placed inside the trolley, restrictions on axle load and tractor geometry parameters as departure angle and ground clearance. In order to evaluate structure characteristics of stress and deflection computer simulation is carried for the road-load conditions. Road profiles for structure simulation and analysis include typical Indian agricultural terrains comprising of black cotton soil and soil lumps

Present work deals with evaluation of dynamic characteristics of a bus body structure. The bus under consideration is a sleeper non-air conditioned vehicle for a passenger capacity of thirty and it is designed adhering to automotive industry standards. Modal analysis of the proposed bus design is carried using Ansys Workbench. With the aid of modal analysis ten mode shapes of the bus are postulated, corresponding frequencies and deflections are estimated. Mesh generator is used to mesh the complex bus model. The deflection and frequency magnitudes of proposed bus model is found with the help of Finite Element Analysis (FEA) technique and they are in good agreement with experimental results available in literature. Engine being the prime source of excitation, it’s frequency is compared with the frequencies determined by FEA of the proposed bus body and it is observed that the frequencies of the bus body for ten different modes are far less than the minimum resonant engine frequency.

No abstract