Traditional heavy-ion testing for single-event effects is carried out in cyclotron facilities with energies around 10 MeV/n. Despite their capability of providing a broad range of linear energy transfer (LET) values, the main limitations are related to the need of testing in a vacuum and with the sensitive region of the components accessible to the low range ions. In this paper, we explore the use of ultrahigh energy (UHE) (5-150 GeV/n) ions in the CERN accelerator complex for radiation effects on electronics testing. At these energies, we show, both through simulations and experimental data, the significant impact of the ion energy on the ionization track structure and associated volume-restricted LET value, highlighting the possible limitations for radiation hardness assurance for highenergy accelerator applications. In addition, we show that from a nuclear interaction perspective, UHE ions behave similar to protons independently of their significantly larger mass.
Single event effect (SEE) testing with ultrahigh energy (UHE) heavy ions, such as the beams provided at CERN, presents advantages related to their long ranges with a constant linear energy transfer value. In the present work, the possibility to test components in parallel is being examined, and results from the CERN 2018 UHE Pb test campaigns are studied. Furthermore, the generation of multibit upsets by the UHE Pb ions is evaluated, and the contribution of possible fragments to the SEE measurements is discussed.
The aim of this work is the dosimetric characterization of a plane parallel ionization chamber under defined beam setups at the CERN Linear Electron Accelerator for Research (CLEAR). A laser driven electron beam with energy of 200 MeV at two different field sizes of approximately 3.5 mm FWHM and approximately 7 mm FWHM were used at different pulse structures. Thereby the dose-per-pulse range varied between approximately 0.2 and 12 Gy per pulse. This range represents approximately conventional dose rate range beam conditions up to ultra-high dose rate (UHDR) beam conditions. The experiment was based on a water phantom which was integrated into the horizontal beamline and radiochromic films and an Advanced Markus ionization chamber was positioned in the water phantom. In addition, the experimental setup were modelled in the Monte Carlo simulation environment FLUKA. In a first step the radiochromic film measurements were used to verify the beamline setup. Depth dose distributions and dose profiles measured by radiochromic film were compared with Monte Carlo simulations to verify the experimental conditions. Second, the radiochromic films were used for reference dosimetry to characterize the ionization chamber. In particular, polarity effects and the ion collection efficiency of the ionization chamber were investigated for both field sizes and the complete dose rate range. As a result of the study, significant polarity effects and recombination loss of the ionization chamber were shown and characterized. However, the work shows that the behavior of the ionization chamber at the laser driven beam line at the CLEAR facility is comparable to classical high dose-per-pulse electron beams. This allows the use of ionization chambers on the CLEAR system and thus enables active dose measurement during the experiment. Compared to passive dose measurement with film, this is an important step forward in the experimental equipment of the facility.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.