No abstract

The influence of cooling rate on the structure and resulting mechanical performance is explored for a set of isotactic polypropylenes with varying molecular weight, insertion of counits, and addition of a nucleating agent. A continuous variation of crystal type (α–mesomorphic phase competition) and structural features is obtained with cooling rate. These variations are discussed in relation to the strain rate‐ and temperature‐dependent yield stress and time‐to‐failure kinetics. The deformation kinetics, characterized by constant activation volumes and energies in the Ree–Eyring theory, prove to be the same for various structures. Differences in thermal history are solely captured by two rate constants that are function of the structure. © 2012 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2012

The mechanical performance of semicrystalline polymers is strongly dependent on their underlying microstructure, consisting of crystallographic lamellae and amorphous layers. In line with that, semicrystalline polymers have previously been modeled as two and three‐phase composites, consisting of a crystalline and an amorphous phase and, in case of the three‐phase composite, a rigid‐amorphous phase between the other two, having a somewhat ordered structure and a constant thickness. In this work, the ability of two‐phase and three‐phase composite models to predict the elastic modulus of semicrystalline polymers is investigated. The three‐phase model incorporates an internal length scale through crystalline lamellar and interphase thicknesses, whereas no length scales are included in the two‐phase model. Using linear elastic behavior for the constituent phases, a closed form solution for the average stiffness of the inclusion is obtained. A hybrid inclusion interaction model has been used to compute the effective elastic properties of polyethylene. The model results are compared with experimental data to assess the capabilities of the two‐ or three‐phase composite inclusion model. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2010

It is shown that predictions of local mechanical properties in a product can be made from the orientation only using an anisotropic viscoplastic model. Due to processing‐induced crystalline orientations, the mechanical properties of injection‐molded polymer products are anisotropic and exhibit strong variations within a product. The tensile response and the mechanical lifetime under static loading depend strongly on the direction of loading and the location. The deformation kinetics are described with an anisotropic viscoplastic model, and quantitative predictions are made based on coupling of the orientation factor in direction of loading and model parameters. A limited characterization of the morphology within a product is sufficient to determine its local mechanical performance.

No abstract