The process of plastic deformation in semicrystalline polymers is complicated due to the operation of a variety of mechanisms at different levels and is strongly dependent on their underlying microstructure. The objective of this work is to establish a quantitative relation between the microstructure and the mechanical performance of semicrystalline polymers, as characterized by elasto-viscoplastic deformation. To do that, a micromechanically based constitutive model is used. The model describes the material as an aggregate of two-phase layered composite inclusions, consisting of crystalline lamellae and amorphous layers. The starting point for adding quantitative abilities to the model, in particular for the yield kinetics, is formed by experimental observations on both the yield kinetics and the time-to-failure of polyethylene at different temperatures, which reveal the contribution of two relaxation processes. To predict the thermo-rheologically complex short-term and long-term failure behavior, the crystallographic slip kinetics and the amorphous yield kinetics are re-evaluated, and the Eyring flow rule is modified by adding a temperature shift function. To enable the prediction of both tension and compression, a non-Schmid effect is added to the constitutive relation of each slip system. The creep behavior of polyethylene is then simulated directly using the multiscale, micromechanical model, predicting the time-tofailure, controlled by plastic deformation.

The mechanical performance of semicrystalline polymers is strongly dependent on their underlying microstructure, consisting of crystallographic lamellae and amorphous layers. In line with that, semicrystalline polymers have previously been modeled as two and three‐phase composites, consisting of a crystalline and an amorphous phase and, in case of the three‐phase composite, a rigid‐amorphous phase between the other two, having a somewhat ordered structure and a constant thickness. In this work, the ability of two‐phase and three‐phase composite models to predict the elastic modulus of semicrystalline polymers is investigated. The three‐phase model incorporates an internal length scale through crystalline lamellar and interphase thicknesses, whereas no length scales are included in the two‐phase model. Using linear elastic behavior for the constituent phases, a closed form solution for the average stiffness of the inclusion is obtained. A hybrid inclusion interaction model has been used to compute the effective elastic properties of polyethylene. The model results are compared with experimental data to assess the capabilities of the two‐ or three‐phase composite inclusion model. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2010

The mechanical behavior of semicrystalline polymers is strongly dependent on their crystallinity level, the initial underlying microstructure, and the evolution of this structure during deformation. A previously developed micromechanical constitutive model is used to capture the elasto‐viscoplastic deformation and texture evolution in semicrystalline polymers. The model represents the material as an aggregate of two‐phase layered composite inclusions, consisting of crystalline lamellae and amorphous layers. This work focuses on adding quantitative abilities to the multiscale constitutive model, in particular for the stress‐dependence of the rate of plastic deformation, referred to as the slip kinetics. To do that, the previously used viscoplastic power law relation is replaced with an Eyring flow rule. The slip kinetics are then re‐evaluated and characterized using a hybrid numerical/experimental procedure, and the results are validated for uniaxial compression data of HDPE, at various strain rates. A double yield phenomenon is observed in the model prediction. Texture analysis shows that the double yield point in the model is due to morphological changes during deformation, that induce a change of deformation mechanism. © 2011 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 49: 1297–1310, 2011

No abstract

No abstract