Optical spectroscopy is increasingly used for cancer diagnostics. Tumor detection feasibility in human kidney samples using mid- and near-infrared (NIR) spectroscopy, fluorescence spectroscopy, and Raman spectroscopy has been reported (Artyushenko et al., Spectral fiber sensors for cancer diagnostics in vitro. In Proceedings of the European Conference on Biomedical Optics, Munich, Germany, 21–25 June 2015). In the present work, a simplification of the NIR spectroscopic analysis for cancer diagnostics was studied. The conventional high-resolution NIR spectroscopic method of kidney tumor diagnostics was replaced by a compact optical sensing device constructively represented by a set of four light-emitting diodes (LEDs) at selected wavelengths and one detecting photodiode. Two sensor prototypes were tested using 14 in vitro clinical samples of 7 different patients. Statistical data evaluation using principal component analysis (PCA) and partial least-squares discriminant analysis (PLS-DA) confirmed the general applicability of the LED-based sensing approach to kidney tumor detection. An additional validation of the results was performed by means of sample permutation.

GaN thin films were grown by electron cyclotron resonance molecular beam epitaxy on Si(111) wafers. X-ray diffraction and transmission electron microscopy revealed that the thin films were single crystals with a hexagonal symmetry and a clear textured structure. The average column size was determined to be close to 100 nm in diameter. Despite the large defect density, a strong room temperature photoluminescence signal with a full width at half maximum of 138 meV was observed from these samples. The surface exhibited random array of sharp tips at the microscopic level with about 5×109 tips/cm2 density. The field emission characteristics of the as-grown thin films were measured, and a threshold electric field as low as 30–40 V/μm and an emission current density of more than 100 mA/cm2 were obtained.

No abstract

No abstract

No abstract