No abstract

Citric acid (CA) can be found naturally in fruits and vegetables, particularly citrus fruit. CA is widely used in many fields but its usage as a green modifying agent and binder for wood is barely addressed. Esterification is one of the most common chemical reactions applied in wood modification. CA contains three carboxyl groups, making it possible to attain at least two esterification reactions that are required for crosslinking when reacting with the hydroxyl groups of the cell wall polymers. In addition, the reaction could form ester linkages to bring adhesivity and good bonding characteristics, and therefore CA could be used as wood binder too. This paper presents a review concerning the usage of CA as a wood modifying agent and binder. For wood modification, the reaction mechanism between wood and CA and the pros and cons of using CA are discussed. CA and its combination with various reactants and their respective optimum parameters are also compiled in this paper. As for the major wood bonding component, the bonding mechanism and types of wood composites bonded with CA are presented. The best working conditions for the CA in the fabrication of wood-based panels are discussed. In addition, the environmental impacts and future outlook of CA-treated wood and bonded composite are also considered.

The depletion of petroleum-based resources and the adverse environmental problems, such as pollution, have stimulated considerable interest in the development of environmentally sustainable materials, which are composed of natural fiber–reinforced polymer composites. These materials could be tailored for a broad range of sustainable industrial applications with new surface functionalities. However, there are several challenges and drawbacks, such as composites processing production and fiber/matrix adhesion, that need to be addressed and overcome. This review could provide an overview of the technological challenges, processing techniques, characterization, properties, and potential applications of NFRPC for sustainable industrial applications. Interestingly, a roadmap for NFRPC to move into Industry 4.0 was highlighted in this review.

Wood is a versatile material that is used for various purposes due to its good properties, such as its aesthetic properties, acoustic properties, mechanical properties, thermal properties, etc. Its poor dimensional stability and low natural durability are the main obstacles that limit its use in mechanical applications. Therefore, modification is needed to improve these properties. The hydrothermal modification of wood exposes wood samples to elevated temperatures and pressure levels by using steam, water, or a buffer solution as the treating medium, or by using superheated steam. Abundant studies regarding hydrothermally treated wood were carried out, but the negative effect on the wood’s strength is one of the limitations. This is a method that boosts the dimensional stability and improves the decay resistance of wood with minimal decrements of the strength properties. As an ecofriendly and cost-effective method, the hydrothermal modification of wood is also a promising alternative to conventional chemical techniques for treating wood. Researchers are attracted to the hydrothermal modification process because of its unique qualities in treating wood. There are many scientific articles on the hydrothermal modification of wood, and many aspects of hydrothermal modification are summarized in review papers in this field. This paper reviews the hydrothermally modified mechanical properties of wood and their potential applications. Furthermore, this article reviews the effects of hydrothermal modification on the various properties of wood, such as the dimensional stability, chemical properties, and durability against termites and fungi. The merits and demerits of hydrothermal wood modification, the effectiveness of using different media in hydrothermal modification, and its comparison with other treating techniques are discussed.

A systematic evaluation tool for natural fibers' capabilities based on moisture content criterion (MCC) was developed and introduced as a new evaluation method. This MCC evaluation tool is designed to predict the behavior of the available natural fibers regarding distinctive desirable characteristics under the effect of the moisture absorption phenomenon. Here, the capabilities of different natural fiber types commonly used in industry, in addition to date palm fibers, were systematically investigated based on MCC. The results demonstrated that MCC is capable of predicting the relative reduction of fiber performance regarding a particular beneficial property because of the effect of moisture absorption. The strong agreements between the predicted values of MCC and results reported in the literature verify its usefulness as an evaluation tool and demonstrate its added value steps in predicting the relative behavior of fibers with a minimal range of errors compared with experimental measurements. Therefore, MCC is capable of better evaluating natural fibers regarding distinctive criteria in a systematic manner, leading to more realistic decisions about their capabilities and therefore enhancing the selection process for both better sustainable design possibilities and industrial product development.

No abstract

No abstract

Medicinal and aromatic plants (MAPs) are widely valued for their aromas, tastes, and treatments for various human illnesses. The chemical constituents and toxicity content of three aromatic plant species, Syzygium polyanthum Wight (Walp.), Monocarpia marginalis (Scheff.) J. Sinclair, and Chromolaena odorata (L.) R.M. King & H. Rob, were determined, via gas chromatography (GC) with mass spectrometry (MS), and flame ionization detector (FID). Altogether, 116 compounds were identified in the essential oils and hexane and methanol extracts. Toxicity evaluations were carried out on human peripheral blood mononuclear cells (PBMCs). Three plant samples were found toxic to human PBMCs. The essential oils of M. marginalis and C. odorata, and the hexane extract of C. odorata yielded IC50 and LD50 values of 76 mg/mL and 6,913 mg/kg, 14 mg/mL and 3,684 mg/kg, and 2.45 mg/mL and 1,927 mg/kg, respectively. Based on the LD50 values, M. marginalis and C. odorata can be classified as slightly and moderately hazardous, respectively. A detailed toxicity evaluation via comet assay showed that M. marginalis and C. odorata induced significant DNA damage (p < 0.05). As for S. polyanthum, the species did not give any cytotoxic or genotoxic evidences.