We first report AlGaN-based deep ultraviolet light-emitting diodes (UV-LEDs) grown on nano-patterned sapphire substrates (NPSS) prepared through a nanosphere lithography technique. The AlN coalescence thickness on NPSS is only 3 μm due to AlN's nano-scaled lateral growth, which also leads to low dislocation densities in AlN and epi-layers above. On NPSS, the light-output power of a 282-nm UV-LED reaches 3.03 mW at 20 mA with external quantum efficiency of 3.45%, exhibiting 98% better performance than that on flat sapphire. Temperature-dependent photoluminescence reveals this significant enhancement to be a combination of higher internal quantum efficiency and higher light extraction efficiency.

The growth of single‐crystal III‐nitride films with a low stress and dislocation density is crucial for the semiconductor industry. In particular, AlN‐derived deep‐ultraviolet light‐emitting diodes (DUV‐LEDs) have important applications in microelectronic technologies and environmental sciences but are still limited by large lattice and thermal mismatches between the epilayer and substrate. Here, the quasi‐van der Waals epitaxial (QvdWE) growth of high‐quality AlN films on graphene/sapphire substrates is reported and their application in high‐performance DUV‐LEDs is demonstrated. Guided by density functional theory calculations, it is found that pyrrolic nitrogen in graphene introduced by a plasma treatment greatly facilitates the AlN nucleation and enables fast growth of a mirror‐smooth single‐crystal film in a very short time of ≈0.5 h (≈50% decrease compared with the conventional process), thus leading to a largely reduced cost. Additionally, graphene effectively releases the biaxial stress (0.11 GPa) and reduces the dislocation density in the epilayer. The as‐fabricated DUV‐LED shows a low turn‐on voltage, good reliability, and high output power. This study may provide a revolutionary technology for the epitaxial growth of AlN films and provide opportunities for scalable applications of graphene films.

Single-crystalline GaN-based light-emitting diodes (LEDs) with high efficiency and long lifetime are the most promising solid-state lighting source compared with conventional incandescent and fluorescent lamps. However, the lattice and thermal mismatch between GaN and sapphire substrate always induces high stress and high density of dislocations and thus degrades the performance of LEDs. Here, the growth of high-quality GaN with low stress and a low density of dislocations on graphene (Gr) buffered sapphire substrate is reported for high-brightness blue LEDs. Gr films are directly grown on sapphire substrate to avoid the tedious transfer process and GaN is grown by metal-organic chemical vapor deposition (MOCVD). The introduced Gr buffer layer greatly releases biaxial stress and reduces the density of dislocations in GaN film and In Ga N/GaN multiple quantum well structures. The as-fabricated LED devices therefore deliver much higher light output power compared to that on a bare sapphire substrate, which even outperforms the mature process derived counterpart. The GaN growth on Gr buffered sapphire only requires one-step growth, which largely shortens the MOCVD growth time. This facile strategy may pave a new way for applications of Gr films and bring several disruptive technologies for epitaxial growth of GaN film and its applications in high-brightness LEDs.

One of the major challenges for the application of GaN-based light emitting diodes (LEDs) in solid-state lighting lies in the low light output power (LOP). Embedding nanostructures in LEDs has attracted considerable interest because they may improve the LOP of GaN-based LEDs efficiently. Recent advances in nanostructures derived from monolayer colloidal crystal (MCC) have made remarkable progress in enhancing the performance of GaN-based LEDs. In this review, the current state of the art in this field is highlighted with an emphasis on the fabrication of ordered nanostructures using large-area, high-quality MCCs and their demonstrated applications in enhancement of LOP from GaN-based LEDs. We describe the remarkable achievements that have improved the internal quantum efficiency, the light extraction efficiency, or both from LEDs by taking advantages of diverse functions that the nanostructures provided. Finally, a perspective on the future development of enhancement of LOP by using the nanostructures derived from MCC is presented.

We report the growth of high-quality AlN films on nano-patterned sapphire substrates (NPSSs) by graphene-assisted quasi-van der Waals epitaxy, which enables rapid coalescence to shorten the growth time. Due to the presence of graphene (Gr), AlN tends to be two-dimensional laterally expanded on the NPSS, leading to the reduction of dislocation density and strain release in the AlN epitaxial layer. Using first-principles calculations, we confirm that Gr can reduce the surface migration barrier and promote the lateral migration of metal Al atoms. Furthermore, the electroluminescence results of deep ultraviolet light emitting diodes (DUV-LEDs) have exhibited greatly enhanced emission located at 280 nm by inserting the Gr interlayer. The present work may provide the potential to solve the bottleneck of high efficiency DUV-LED.

No abstract

Polarization-doping via graded AlGaN layer on N-face (0001¯) GaN has been demonstrated as an inspiring p-type doping method for wide-band-gap nitrides. However, the polarity of III-nitrides grown by metal organic chemical vapor deposition is metal-face typically. In this paper, we show that three-dimensional mobile hole gas induced by polarization can be formed in (0001)-oriented metal-face III-nitride structure. The hole concentration of a Mg-doped AlxGa1−xN layer with graded Al composition from x=0.3 to 0 grown on AlN buffer layer is remarkably enhanced, compared with that of a Mg-doped GaN layer grown under the same conditions. In addition, the hole concentration in the graded AlGaN layer is absence of freezeout as the temperature decreases, indicating that the hole is induced by polarization. This p-type doping method paves a way for achieving high-efficiency in wide-band-gap semiconductor light-emitting devices with p-type doping problem.

For III‐nitride‐based devices, such as high‐brightness light‐emitting diodes (LEDs), the poor heat dissipation of the sapphire substrate is deleterious to the energy efficiency and restricts many of their applications. Herein, the role of vertically oriented graphene (VG) nanowalls as a buffer layer for improving the heat dissipation in AlN films on sapphire substrates is studied. It is found that VG nanowalls can effectively enhance the heat dissipation between an AlN film and a sapphire substrate in the longitudinal direction because of their unique vertical structure and good thermal conductivity. Thus, an LED fabricated on a VG‐sapphire substrate shows a 37% improved light output power under a high injection current (350 mA) with an effective 3.8% temperature reduction. Moreover, the introduction of VG nanowalls does not degrade the quality of the AlN film, but instead promotes AlN nucleation and significantly reduces the epilayer strain that is generated during the cooling process. These findings suggest that the VG nanowalls can be a good buffer layer candidate in III‐nitride semiconductor devices, especially for improving the heat dissipation in high‐brightness LEDs.