No abstract

The influence of quadrature phase shift on the measured displacement error was experimentally investigated using a two-detector polarizing homodyne laser interferometer with a quadrature detection system. Common nonlinearities, including the phase-shift error, were determined and effectively corrected by a robust data-processing algorithm. The measured phase-shift error perfectly agrees with the theoretically determined phase-shift error region. This error is systematic, periodic and severely asymmetrical around the nominal displacement value. The main results presented in this paper can also be used to assess and correct the detector errors of other interferometric and non-interferometric displacement-measuring devices based on phase-quadrature detection.

The choice of fitting methods for elliptically scattered data obtained with displacement-measuring homodyne quadrature laser interferometers significantly influences the accuracy of the interferometer. This is especially important when the data contain a lot of noise or provide only a segment of the ellipse. The ellipse parameters extracted by the fitting are used either to correct the data or the basic arctangent phase-unwrapping function in order to enhance the accuracy of the measured displacement by reducing the common nonlinearities. We propose the use of linear, ellipse-specific, least-squares fitting that is further bias-corrected using a linear algorithm. This stable fitting method provides a good balance between the accuracy of the fit and the computational efficiency, and never returns corrupt, non-ellipse parameters. It is therefore applicable for an online, uniform fringe subdivision when there is a demand for sub-nanometric resolution. An experimental confirmation of the improvement over traditional fitting methods was carried out with a single-pass, two-detector homodyne quadrature laser interferometer. We were able to operate the interferometer with nanometric accuracy, provided the data draw out at least a quarter-arc of an ellipse.

Electromagnetic momentum carried by light is observable through the mechanical effects radiation pressure exerts on illuminated objects. Momentum conversion from electromagnetic fields to elastic waves within a solid object proceeds through a string of electrodynamic and elastodynamic phenomena, collectively bound by momentum and energy continuity. The details of this conversion predicted by theory have yet to be validated by experiments, as it is difficult to distinguish displacements driven by momentum from those driven by heating due to light absorption. Here, we have measured temporal variations of the surface displacements induced by laser pulses reflected from a solid dielectric mirror. Ab initio modelling of momentum flow describes the transfer of momentum from the electromagnetic field to the dielectric mirror, with subsequent creation/propagation of multicomponent elastic waves. Complete consistency between predictions and absolute measurements of surface displacements offers compelling evidence of elastic transients driven predominantly by the momentum of light.

Precise control over light-matter interactions is critical for many optical manipulation and material characterization methodologies, further playing a paramount role in a host of nanotechnology applications. Nonetheless, the fundamental aspects of interactions between electromagnetic fields and matter have yet to be established unequivocally in terms of an electromagnetic momentum density. Here, we use tightly focused pulsed laser beams to detect bulk and boundary optical forces in a dielectric fluid. From the optical convoluted signal, we decouple thermal and nonlinear optical effects from the radiation forces using a theoretical interpretation based on the Microscopic Ampère force density. It is shown, for the first time, that the time-dependent pressure distribution within the fluid chiefly originates from the electrostriction effects. Our results shed light on the contribution of optical forces to the surface displacements observed at the dielectric air-water interfaces, thus shedding light on the long-standing controversy surrounding the basic definition of electromagnetic momentum density in matter.

During the interaction of a laser pulse with the surface of a solid object, the object always gains momentum. The delivered force impulse is manifested as propulsion. Initially, the motion of the object is composed of elastic waves that carry and redistribute the acquired momentum as they propagate and reflect within the solid. Even though only ablation- and light-pressure-induced mechanical waves are involved in propulsion, they are always accompanied by the ubiquitous thermoelastic waves. This paper describes 1D elastodynamics of pulsed optical manipulation and presents two diametrical experimental observations of elastic waves generated in the confined ablation and in the radiation pressure regime.

No abstract

The reflection of light from the surface of an elastic solid gives rise to various types of elastic waves that propagate inside the solid. The weakest waves are generally those that are generated by the radiation pressure acting during the reflection of the light. Here, we present the first quantitative measurement of such light-pressure-induced elastic waves inside an ultrahigh-reflectivity mirror. Amplitudes of a few picometers were observed at the rear side of the mirror with a displacement-measuring conical piezoelectric sensor when laser pulses with a fluence of 1 J/cm(2) were reflected from the front side of the mirror.