Microorganisms synthesise a wide range of surface-active compounds (SAC), generally called biosurfactants. These compounds are mainly classified according to their molecular weight, physico-chemical properties and mode of action. The low-molecular-weight SACs or biosurfactants reduce the surface tension at the air/water interfaces and the interfacial tension at oil/water interfaces, whereas the high-molecular-weight SACs, also called bioemulsifiers, are more effective in stabilising oil-in-water emulsions. Biosurfactants are attracting much interest due to their potential advantages over their synthetic counterparts in many fields spanning environmental, food, biomedical, and other industrial applications. Their large-scale application and production, however, are currently limited by the high cost of production and by limited understanding of their interactions with cells and with the abiotic environment. In this paper, we review the current knowledge and the latest advances in biosurfactant applications and the biotechnological strategies being developed for improving production processes and future potential.

technology and intensified production often involve a greater need for commercial fertilizer nutrients to avoid Nutrient inputs in crop production systems have come under innutrient depletion and ensure soil quality and crop procreased scrutiny in recent years because of the potential for environductivity. The need for increased inputs correctly raises mental impact from inputs such as N and P. The benefits of nutrient inputs are often minimized in discussions of potential risk. The purpose questions about associated risks. Potential risks are ofof this article is to examine existing data and approximate the effects ten widely publicized while the associated benefits of of nutrient inputs, specifically from commercial fertilizers, on crop an abundant, affordable, and healthful food supply can yield. Several long-term studies in the USA, England, and the tropics, be overlooked or understated. To judge any such pracalong with the results from an agricultural chemical use study and tice or system, the risks must be evaluated in comparison nutrient budget information, were evaluated. A total of 362 seasons with the benefits. While misuses of agricultural fertilizof crop production were included in the long-term study evaluations. ers have undoubtedly occurred and concerns about how Crops utilized in these studies included corn (Zea mays L.), wheat fertilizers affect the environment have sometimes been (Triticum aestivum L.), soybean [Glycine max (L.) Merr.], rice (Oroverstated, the purpose of this article is not to address yza sativa L.), and cowpea [Vigna unguiculata (L.) Walp.]. The these issues but to provide evidence of the impact comaverage percentage of yield attributable to fertilizer generally ranged from about 40 to 60% in the USA and England and tended to be mercial fertilizers have had on agricultural production. much higher in the tropics. Recently calculated budgets for N, P, and Several attempts have previously been made to esti-K indicate that commercial fertilizer makes up the majority of nutrient mate how much of the crop production in the USA is inputs necessary to sustain current crop yields in the USA. The results attributable to commercial nutrient inputs. These estiof this investigation indicate that the commonly cited generalizationmates usually range from about 30 to 50% for major that at least 30 to 50% of crop yield is attributable to commercial grain crops (Nelson, 1990). Determining these estimates fertilizer nutrient inputs is a reasonable, if not conservative estimate. W.M. Stewart, Potash and Phosphate Inst., 2423 Rogers Key, San CHEMICAL USE STUDY Antonio, TX 78258; D.W. Dibb, Potash and Phosphate Inst., 655 Engineering Dr., Suite 110, Norcross, GA 30092; A.E. Johnston, Ro-The impact of eliminating the use of several chemical thamsted Research, Harpenden AL5 2JQ, England; and T.J. Smyth, inputs, including inorganic N fertilizer, on corn, cotton

No abstract

The self-assembly in solution and adsorption at the air-water interface, measured by small-angle neutron scattering, SANS, and neutron reflectivity, NR, of the monorhamnose and dirhamnose rhamnolipids (R1, R2) and their mixtures, are discussed. The production of the deuterium-labeled rhamnolipids (required for the NR studies) from a Pseudomonas aeruginosa culture and their separation into the pure R1 and R2 components is described. At the air-water interface, R1 and R2 exhibit Langmuir-like adsorption isotherms, with saturated area/molecule values of about 60 and 75 Å(2), respectively. In R1/R2 mixtures, there is a strong partitioning of R1 to the surface and R2 competes less favorably because of the steric or packing constraints of the larger R2 dirhamnose headgroup. In dilute solution (<20 mM), R1 and R2 form small globular micelles, L(1), with aggregation numbers of about 50 and 30, respectively. At higher solution concentrations, R1 has a predominantly planar structure, L(α) (unilamellar, ULV, or bilamellar, BLV, vesicles) whereas R2 remains globular, with an aggregation number that increases with increasing surfactant concentration. For R1/R2 mixtures, solutions rich in R2 are predominantly micellar whereas solutions rich in R1 have a more planar structure. At an intermediate composition (60 to 80 mol % R1), there are mixed L(α)/L(1) and L(1)/L(α) regions. However, the higher preferred curvature associated with R2 tends to dominate the mixed R1/R2 microstructure and its associated phase behavior.

The objective of this study was to investigate the effect of key extraction parameters of extraction time (5-25 min), acid concentration (0-0.06 M HCl) and ultrasound amplitude (22.8-114 μm) on yields of bioactive compounds (total phenolics, fucose and uronic acid) from Ascophyllumnodosum. Response surface methodology was employed to optimize the extraction variables for bioactive compounds' yield. A second order polynomial model was fitted well to the extraction experimental data with (R(2)>0.79). Extraction yields of 143.12 mgGAE/gdb, 87.06 mg/gdb and 128.54 mg/gdb were obtained for total phenolics, fucose and uronic acid respectively at optimized extraction conditions of extraction time (25 min), acid concentration (0.03 M HCl) and ultrasonic amplitude (114 μm). Mass spectroscopy analysis of extracts show that ultrasound enhances the extraction of high molecular weight phenolic compounds from A. nodosum. This study demonstrates that ultrasound assisted extraction (UAE) can be employed to enhance extraction of bioactive compounds from seaweed.

The role of organic acids in aluminum (Al) tolerance has been the object of intensive research. In the present work, we evaluated the roles of organic acid exudation and concentrations at the root tip on Al tolerance of soybean. Exposing soybean seedlings to Al3+ activities up to 4.7 &mgr;M in solution led to different degrees of restriction of primary root elongation. Al tolerance among genotypes was associated with citrate accumulation and excretion into the external media. Citrate and malate efflux increased in all genotypes during the first 6 h of Al exposure, but only citrate efflux in Al-tolerant genotypes was sustained for an extended period. Tolerance to Al was correlated with the concentration of citrate in root tips of 8 genotypes with a range of Al sensitivities (r2=0.75). The fluorescent stain lumogallion indicated that more Al accumulated in root tips of the Al-sensitive genotype Young than the Al-tolerant genotype PI 416937, suggesting that the sustained release of citrate from roots of the tolerant genotype was involved in Al exclusion. The initial stimulation of citrate and malate excretion and accumulation in the tip of all genotypes suggested the involvement of additional tolerance mechanisms. The experiments included an examination of Al effects on lateral root elongation. Extension of lateral roots was more sensitive to Al than that of tap roots, and lateral root tips accumulated more Al and had lower levels of citrate.

No abstract

Phlorotannins are a group of complex polymers of phloroglucinol (1,3,5-trihydroxybenzene) unique to macroalgae. These phenolic compounds are integral structural components of the cell wall in brown algae, but also play many secondary ecological roles such as protection from UV radiation and defense against grazing. This study employed Ultra Performance Liquid Chromatography (UPLC) with tandem mass spectrometry to investigate isomeric complexity and observed differences in phlorotannins derived from macroalgae harvested off the Irish coast (Fucus serratus, Fucus vesiculosus, Himanthalia elongata and Cystoseira nodicaulis). Antioxidant activity and total phenolic content assays were used as an index for producing phlorotannin fractions, enriched using molecular weight cut-off dialysis with subsequent flash chromatography to profile phlorotannin isomers in these macroalgae. These fractions were profiled using UPLC-MS with multiple reaction monitoring (MRM) and the level of isomerization for specific molecular weight phlorotannins between 3 and 16 monomers were determined. The majority of the low molecular weight (LMW) phlorotannins were found to have a molecular weight range equivalent to 4–12 monomers of phloroglucinol. The level of isomerization within the individual macroalgal species differed, resulting in substantially different numbers of phlorotannin isomers for particular molecular weights. F. vesiculosus had the highest number of isomers of 61 at one specific molecular mass, corresponding to 12 phloroglucinol units (PGUs). These results highlight the complex nature of these extracts and emphasize the challenges involved in structural elucidation of these compounds.