The growth of high quality epitaxial beta-gallium oxide (β-Ga2O3) using a compound source by molecular beam epitaxy has been demonstrated on c-plane sapphire (Al2O3) substrates. The compound source provides oxidized gallium molecules in addition to oxygen when heated from an iridium crucible in a high temperature effusion cell enabling a lower heat of formation for the growth of Ga2O3, resulting in a more efficient growth process. This source also enabled the growth of crystalline β-Ga2O3 without the need for additional oxygen. The influence of the substrate temperatures on the crystal structure and quality, chemical bonding, surface morphology, and optical properties has been systematically evaluated by x-ray diffraction, scanning transmission electron microscopy, x-ray photoelectron spectroscopy, atomic force microscopy, spectroscopic ellipsometry, and UV-vis spectroscopy. Under optimized growth conditions, all films exhibited pure 2¯01  oriented β-Ga2O3 thin films with six-fold rotational symmetry when grown on a sapphire substrate. The thin films demonstrated significant absorption in the deep-ultraviolet (UV) region with an optical bandgap around 5.0 eV and a refractive index of 1.9. A deep-UV photodetector fabricated on the high quality β-Ga2O3 thin film exhibits high resistance and small dark current (4.25 nA) with expected photoresponse for 254 nm UV light irradiation suggesting that the material grown using the compound source is a potential candidate for deep-ultraviolet photodetectors.

Epitaxial beta-gallium oxide (β-Ga2O3) has been deposited on c-plane sapphire by plasma-assisted molecular-beam epitaxy technique using two methods. One method relied on a compound Ga2O3 source with oxygen plasma while the second used elemental Ga source with oxygen plasma. A side-by-side comparison of the growth parameters between these two methods has been demonstrated. With various substrate temperatures, pure phase (2¯01) oriented β-Ga2O3 thin films were obtained using both sources. Reflection high energy electron diffraction patterns displayed a threefold reconstruction during the growth. X-ray photoelectron spectroscopy analysis showed a shift in the binding energy of the Ga 2p peaks consistent with a Ga being in a +3 oxidation state. For transparent oxide like β-Ga2O3, it is important to determine the index of refraction (n) and its functional dependence on the wavelength. The Cauchy dispersion relation was employed to evaluate the refractive index, film thickness, roughness values, and extinction coefficient. The band gap energies of the thin films were calculated to be ∼5.02 eV by extrapolating the linear portion of Tauc-plot analysis and the refractive index is ∼1.89 at the wavelength (λ) of 6328 Å, suggesting high structural quality and packing density of the oxide films.

No abstract

β-Ga2O3 thin films were grown on c-plane sapphire substrates by plasma-assisted molecular beam epitaxy. The films were grown using an elemental gallium source and oxygen supplied by an RF plasma source. Reflection high-energy electron diffraction (RHEED) was used to monitor the surface quality in real time. Both in situ RHEED and ex situ X-ray diffraction confirmed the formation of single crystal β-phase films with excellent crystallinity on c-plane sapphire. Spectroscopic ellipsometry was used to determine the film thicknesses, giving values in the 11.6–18.8 nm range and the refractive index dispersion curves. UV-Vis transmittance measurements revealed that strong absorption of β-Ga2O3 starts at ∼270 nm. Top metal contacts were deposited by thermal evaporation for I-V characterization, which has been carried out in dark, as well as under visible and UV light illumination. The optical and electrical measurements showed that the grown thin films of β-Ga2O3 are excellent candidates for deep-ultraviolet detection and sensing.

SrTiO3 films on GaAs, grown by molecular beam epitaxy, serve as buffer layers for epitaxial growth of ferromagnetic or multiferroic films using pulsed laser deposition.