Microgrids are emerging as an important constituent of large-scale smart grids. They are equipped with the controls necessary for managing the operation in islanded or grid connected mode and serve the loads with clean, reliable, and uninterruptible power. Microgrid must be equipped with a robust grid synchronization (GS) algorithm so as to allow a smooth transfer from islanded mode to grid tied mode. This gets even more critical when the availability of the power grid is irregular or the power grid is weak. This paper proposes a simple yet highly reliable GS technique based on controller area network (CAN) communication. The grid synchronizer block senses the three phase grid voltages, derives the phase angle (θ) using synchronously rotating reference frame-based phase lock loop, and transmits this information on the CAN network to all microsources (MS). The local controller associated with each MS receives the data with small but known and definite time latencies. This allows each MS to energize simultaneously in synchronization with the grid, facilitating easy GS of all the MS, minimizing the time required for GS of the complete microgrid. All the analytical, simulation, and hardware results related to this paper are presented.Index Terms-Black-start, controller area network (CAN), grid synchronization (GS), island mode, microgrid, smart grid.
1949-3053
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.