NiO nanostructures with three distinct morphologies were fabricated by a sol-gel method and their morphology-dependent supercapacitor properties were exploited. The nanoflower- shaped NiO with a distinctive three-dimensional (3D) network and the highest pore volume shows the best supercapacitor properties. The nanopores in flower-shaped nanostructures, offering advantages in contact with and transport of the electrolyte, allow for 3D nanochannels in NiO structure, providing longer electron pathways. The XPS and EIS data of the NiO nanostructure confirm that the flower-shaped NiO, which has the lowest surface area among the three morphologies, was effectively optimized as a superior electrode and yielded the greatest pseudocapacitance. This study indicates that forming a 3D nanonetwork is a straightforward means of improving the electrochemical properties of a supercapacitor.
A mass-producible mesoporous graphene nanoball (MGB) was fabricated via a precursor-assisted chemical vapor deposition (CVD) technique for supercapacitor application. Polystyrene balls and reduced iron created under high temperature and a hydrogen gas environment provide a solid carbon source and a catalyst for graphene growth during the precursor-assisted CVD process, respectively. Carboxylic acid and sulfonic acid functionalization of the polystyrene ball facilitates homogeneous dispersion of the hydrophobic polymer template in the metal precursor solution, thus, resulting in a MGB with a uniform number of graphene layers. The MGB is shown to have a specific surface area of 508 m(2)/g and is mesoporous with a mean mesopore diameter of 4.27 nm. Mesopores are generated by the removal of agglomerated iron domains, permeating down through the soft polystyrene spheres and providing the surface for subsequent graphene growth during the heating process in a hydrogen environment. This technique requires only drop-casting of the precursor/polystyrene solution, allowing for mass-production of multilayer MGBs. The supercapacitor fabricated by the use of the MGB as an electrode demonstrates a specific capacitance of 206 F/g and more than 96% retention of capacitance after 10,000 cycles. The outstanding characteristics of the MGB as an electrode for supercapacitors verify the strong potential for use in energy-related areas.
A gold nanoparticle-coated and surface-textured TiO2 inverse opal (Au/st-TIO) structure that provides a dramatic improvement of photoelectrochemical hydrogen generation has been fabricated by nano-patterning of TiO2 precursors on TiO2 inverse opal (TIO) and subsequent deposition of gold NPs. The surface-textured TiO2 inverse opal (st-TIO) maximizes the photon trapping effects triggered by the large dimensions of the structure while maintaining the adequate surface area achieved by the small dimensions of the structure. Au NPs are incorporated to further improve photoconversion efficiency in the visible region via surface plasmon resonance. st-TIO and Au/st-TIO exhibit a maximum photocurrent density of ∼0.58 mA cm(-2) and ∼0.8 mA cm(-2), which is 2.07 and 2.86 times higher than that of bare TIO, respectively, at an applied bias of +0.5 V versus an Ag/AgCl electrode under AM 1.5 G simulated sunlight illumination via a photocatalytic hydrogen generation reaction. The excellent performance of the surface plasmon-enhanced mesoporous st-TIO structure suggests that tailoring the nanostructure to proper dimensions, and thereby obtaining excellent light absorption, can maximize the efficiency of a variety of photoconversion devices.
A highly-porous, binder free 3D-NiCo2O4/Ni nanostructure on the Ni-wire was fabricated for flexible fiber supercapacitors. The fabricated device exhibited enhanced capacitance, high efficiency, good cycling stability, and flexibility.
We report a novel approach to synthesize chemical vapor deposition-grown three-dimensional graphene nano-networks (3D-GNs) that can be mass produced with large-area coverage. Annealing of a PVA/iron precursor under a hydrogen environment, infiltrated into 3D-assembled-colloidal silicas reduces iron ions and generates few-layer graphene by precipitation of carbon on the iron surface. The 3D-GN can be grown on any electronic device-compatible substrate, such as Al2O3, Si, GaN, or Quartz. The conductivity and surface area of a 3D-GN are 52 S/cm and 1,025 m2/g, respectively, which are much better than the previously reported values. Furthermore, electrochemical double-layer capacitors based on the 3D-GN have superior supercapacitor performance with a specific capacitance of 245 F/g and 96.5% retention after 6,000 cycles due to the outstanding conductivity and large surface area. The excellent performance of the 3D-GN as an electrode for supercapacitors suggests the great potential of interconnected graphene networks in nano-electronic devices and energy-related materials.
By coupling α-Fe2O3 with a 3D graphene inverse opal (3D-GIO) conducting electrode, the short diffusion length of carriers and low absorption coefficient in α-Fe2O3 for photoelectrochemical applications were successfully addressed. GIO was directly grown on FTO substrate under low temperature conditions, removing the need for a graphene transfer process. α-Fe2O3 nanoparticles (NPs) were hydrothermally deposited on the surface of GIO, creating α-Fe2O3/GIO. The photocurrent density of α-Fe2O3/GIO in water splitting reactions reached 1.62 mA/cm(2) at 1.5 V vs RHE, which is 1.4 times greater than that of optimized α-Fe2O3. The EIS and IPCE data confirm reduced electron-hole recombination and fast electron transfer processes due to the short distance between active materials and the conducting electrode in the α-Fe2O3/GIO system. Our result may pave the way for designing devices in advanced energy conversion applications as well as a high efficiency hematite-based PEC system.
Dual-scale diamond-shaped gold nanostructures (d-DGNs) with larger scale diamond-shaped gold nanoposts (DGNs) coupled to smaller scale gold nanoparticles have been fabricated via interference lithography as a highly reliable and efficient substrate for surface enhanced Raman scattering (SERS). The inter- and intra-particle plasmonic fields of d-DGNs are varied by changing the periodicity of the DGNs and the density of gold nanoparticles. Because of the two different length scales in the nanostructures, d-DGNs show multipole plasmonic peaks as well as dipolar plasmonic peaks, leading to a SERS enhancement factor of greater than 10(9). Simulations are carried out by finite-difference time-domain (FDTD) methods to evaluate the dependence of the inter- and intra-particle plasmonic field and the results are in good agreement with the experimentally obtained data. Our studies reveal that the combination of two different length scales is a straightforward approach for achieving reproducible and great SERS enhancement by light trapping in the diamond-shaped larger scale structures as well as efficient collective plasmon oscillation in the small size particles.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.