Surface engineering of implantable devices involving polymeric biomaterials has become an essential aspect for medical implants. A surface enhancement technique can provide an array of unique surface properties that improve its biocompatibility and functionality as an implant. Polyurethane-based implants that have found extensively acclaimed usage as an implant in biomedical applications, especially in the area of cardiovascular devices, still lack any mechanism to ward off bacterial or platelet adhesion. To bring out such a defense mechanism we are proposing a surface modification technique. Graphene oxide (GO) in very thin film form was wrapped onto the electrospun fibroporous polycarbonate urethane (PCU) membrane (GOPCU) by a simple method of electrospraying. In the present study, we have developed a simple single-step method for coating a polymeric substrate with a thin GO film and evaluated the novel antiadhesive activity of these films. SEM micrographs after coating showed the presence of very thin GO films over the PCU membrane. On the GOPCU surface, the contact angle was shifted by ∼30°, making the hydrophobic PCU surface slightly hydrophilic, while Raman spectral characterization and mapping showed the presence and distribution of GO over 75% of the membrane. A reduced platelet adhesion on the GOPCU surface was observed; meanwhile, bacterial adhesion also got reduced by 85% for Staphylococcus aureus (Gram positive, cocci) and 64% for Pseudomonas aeruginosa (Gram negative, bacilli). A cell adhesion study conducted using mammalian fibroblast cells projected its proliferation percentage in a MTT assay, with 82% cell survival on PCU and 86% on GOPCU after 24 h culture, while a study for an extended period of 72 h showed 87% of survival on PCU and 88% on GOPCU. This plethora of functionalities by a simple modification technique makes thin GO films a self-sufficient surface engineering material for future biomedical applications.

Physiological pressure measurement is one of the most common applications of sensors in healthcare. Particularly, continuous pressure monitoring provides key information for early diagnosis, patient-specific treatment, and preventive healthcare. This paper presents a thin-film flexible wireless pressure sensor for continuous pressure measurement in a wide range of medical applications but mainly focused on interface pressure monitoring during compression therapy to treat venous insufficiency. The sensor is based on a pressure-dependent capacitor (C) and printed inductive coil (L) that form an inductor-capacitor (LC) resonant circuit. A matched reader coil provides an excellent coupling at the fundamental resonance frequency of the sensor. Considering varying requirements of venous ulceration, two versions of the sensor, with different sizes, were finalized after design parameter optimization and fabricated using a cost-effective and simple etching method. A test setup consisting of a glass pressure chamber and a vacuum pump was developed to test and characterize the response of the sensors. Both sensors were tested for a narrow range (0–100 mmHg) and a wide range (0–300 mmHg) to cover most of the physiological pressure measurement applications. Both sensors showed good linearity with high sensitivity in the lower pressure range <100 mmHg, providing a wireless monitoring platform for compression therapy in venous ulceration.

Fabrication of a surface-engineered electrospun scaffold having biomimetic properties like the extracellular matrix (ECM) is essential for neural tissue engineering. An electroconductive and elastomeric scaffold with aligned fibers acting as a substrate may have a great impact on the directional outgrowth of neurites. In this study, we have electrospun electrically conductive, polyurethane-based elastomeric and topographically aligned fibro-porous neural scaffolds. Adhesive proteins of the ECM are documented to have an important role in controlling neuronal cell behavior, including cell adhesion, proliferation, and neurite outgrowth. These bio-adhesion proteins or nanomaterials mimicking their action, if used for surface modification of neural scaffolds, may have the potential to accelerate the nerve repair process. Thus, electrospun scaffolds fabricated were surface-engineered using a unique and modified single-step electrospraying technique to coat the scaffold surface with an exploratory bio-adhesion agent, a thin layer of graphene oxide (GO) films. The study was then carried out to determine if the GO-coated electrospun electroconductive polycarbonate urethane (PCU) substrate can improve the bio-interface attributes of these scaffolds or may alter the neurite outgrowth of PC-12 cells like any other bio-adhesion proteins. Therefore, the hybrid scaffolds with GO coatings were compared with similar scaffolds coated with poly-l-lysine (PLL) for neural cell adhesion, proliferation, and neurite extension. Neurite outgrowth studies showed that although the average neurite length was comparable on both GO- and PLL-coated surfaces, the length profile of neurites, when categorized based on length, showed an increased number of lengthier neurites on the GO-coated hybrid scaffolds. In particular, the study brings out an innovative surface engineering technique for the coating of GO on polymeric scaffolds. It may be further put together in designing of hybrid surfaces with nanotopographical biophysical cues on three-dimensional neural scaffolds, which in turn may stimulate an accelerated neuronal regeneration via providing an enhanced ECM like milieu.

In this article, we report the development of graphene oxide (GO) reinforced electrospun poly(carbonate urethane) (PCU) nanocomposite membranes intended for biomedical applications. In this study, we aimed to improve the mechanical properties of PCU fibroporous electrospun membranes through fiber alignment and GO incorporation. Membranes with 1, 1.5, and 3% loadings of GO were evaluated for their morphology, mechanical properties, crystallinity, biocompatibility, and hemocompatibility. The mechanical properties were assessed under both static and dynamic conditions to explore the tensile characteristics and viscoelastic properties. The results show that GO presented a good dispersion and exfoliation in the PCU matrix, contributing to an increase in the mechanical performance. The static mechanical properties indicated a 55% increase in the tensile strength, a 127% increase in toughness for 1.5 wt % GO loading and the achievement of a maximum strength reinforcement efficiency value at the same loading. Crystallinity changes in membranes were examined by X-ray diffraction analysis. In vitro cytotoxicity tests with L-929 fibroblast cells and percentage hemolysis tests with fresh venous blood displayed the membranes to be cytocompatible with acceptable levels of hemolytic characteristics. Accordingly, these results highlight the potential of this mechanically improved composite membrane's application in the biomedical field.

Nanosheet type fillers apart from their size and surface functional groups may have numerous attributes affecting the mechanical properties of polymeric nanocomposites.