The prediction of landslides and other events associated with slope movement is a very serious issue in many national parks around the world. This article deals with the territory of the Malá Studená Dolina (Little Cold Valley, High Tatras National Park-Slovakia), where there are extensive talus cones, through which seasonally heavy hiking trails lead. In the last few years particularly, there have been frequent falls and landslides in the mountainous environment, which also caused several fatal injuries in 2018. For the above reasons, efforts are being made to develop a methodology for monitoring the changes of the talus cones in this specific alpine area, to determine the size, speed, and character of the morphological changes of the soil. Non-contact methods of mass data collection (laser scanning with Leica P40 and aerial photogrammetry with unmanned aerial system (UAS) DJI Phantom 4 Pro) have been used. The results of these measurements were compared and the overall suitability of both methods for measurement in such terrain evaluated. The standard deviation of the difference of surface determination (represented by the point cloud) is about 0.03 m. As such accuracy is sufficient for the purpose of monitoring talus cones and the use of UAS is easier and associated with lower risk of damage of expensive equipment, we conclude that this method is more suitable for mapping and for repeated monitoring of such terrain. The properties of the outputs of the individual measurement methods, the degree of measurement difficulty and specific measurement conditions in the mountainous terrain, as well as the economy of the individual methods, are discussed in detail.

A frequently recurring problem in the extraction of mineral resources (especially heterogeneous mineral resources) is the rapid operative determination of the extracted quantity of raw material in a surface quarry. This paper deals with testing and analyzing the possibility of using unconventional methods such as digital close-range photogrammetry and terrestrial laser scanning in the process of determining the bulk density of raw material under in situ conditions. A model example of a heterogeneous deposit is the perlite deposit Lehôtka pod Brehmi (Slovakia). Classical laboratory methods for determining bulk density were used to verify the results of the in situ method of bulk density determination. Two large-scale samples (probes) with an approximate volume of 7 m 3 and 9 m 3 were realized in situ. 6 point samples (LITH) were taken for laboratory determination. By terrestrial laser scanning (TLS) measurement from 2 scanning stations, point clouds with approximately 163,000/143,000 points were obtained for each probe. For Structure-from-Motion (SfM) photogrammetry, 49/55 images were acquired for both probes, with final point clouds containing approximately 155,000/141,000 points. Subsequently, the bulk densities of the bulk samples were determined by the calculation from in situ measurements by TLS and SfM photogrammetry. Comparison of results of the field in situ measurements (1841 kg·m −3 ) and laboratory measurements (1756 kg·m −3 ) showed only a 4.5% difference in results between the two methods for determining the density of heterogeneous raw materials, confirming the accuracy of the used in situ methods. For the determination of the loosening coefficient, the material from both large-scale samples was transferred on a horizontal surface. Their volumes were determined by TLS. The loosening coefficient for the raw material of 1.38 was calculated from the resulting values.

No abstract

No abstract

The Pannonian basin is a major geothermal heat system in Central Europe. Its peripheral basin, the East Slovakian basin, is an example of a geothermal structure with a linear, directed heat flow ranging from 90 to 100 mW/m2 from west to east. However, the use of the geothermal source is limited by several critical tectono-geologic factors: (a) Tectonics, and the associated disintegration of the aquifer block by multiple deformations during the pre-Paleogene, mainly Miocene, period. The main discontinuities of NW-SE and N-S direction negatively affect the permeability of the aquifer environment. For utilization, minor NE-SW dilatation open fractures are important, which have been developed by sinistral transtension on N–S faults and accelerated normal movements to the southeast. (b) Hydrogeologically, the geothermal structure is accommodated by three water types, namely, Na-HCO3 with 10.9 g·L−1 mineralization (in the north), the Ca-Mg-HCO3 with 0.5–4.5 g·L−1 mineralization (in the west), and Na-Cl water type containing 26.8–33.4 g·L−1 mineralization (in the southwest). The chemical composition of the water is influenced by the Middle Triassic dolomite aquifer, as well as by infiltration of saline solutions and meteoric waters along with open fractures/faults. (c) Geothermally anomalous heat flow of 123–129 °C with 170 L/s total flow near the Slanské vchy volcanic chain seems to be the perspective for heat production.

No abstract

The article presents the first description of a complete and continuous series from berthierite to garavellite sulphosalts in the Western Carpathians. Berthierite is a common main or accessory phase of Sb mineralizations in the Western Carpathians, and occurs at many localities and ore deposits as well. On the other side, garavellite or Bi-rich berthierite is a relatively rare accessory phase. The highest Bi content in garavellite reaches up to 38.04 wt. % which represents 0.90 apfu, and its crystallochemical formula can be written as Fe0.97Sb1.07Bi0.90S3.98. Raman band shifts were observed in the isomorphic berthierite–garavellite series. Garavellite occurs in the younger stages of sulphidic mineralization, and associates with tetrahedrite, berthierite, Bi-chalcostibite, Sb-bismuthinite, Bi-stibnite, ullmanite and cinnabarite. It creates irregular grains and veinlets in pre-existing tetrahedrite, or forms myrmekite intergrowths with chalcopyrite in tetrahedrite. Bi content in chalcostibite is up to 0.20 apfu. Besides the tetrahedrite, pre-existing sulphosalts are the members of the tintinaite–kobellite series, Bi-jamesonite and bournonite. The Sb/(Sb+Bi) ratio of minerals of the tintinaite–kobellite series varies from 0.37 to 0.80. The maximum content of Bi in jamesonite is up to 1.22 apfu. A vertical zonation at the ore vein body (mining levels 6 / 180 a.s.l., 8 / 80 a.s.l., 10 / 20 b.s.l.) is represented by the Sb decrease along with the Bi increase with increasing depth. Bi content continuously decreases during the older ore mineralization stage and Sb increases at the younger mineralization stage. Both of the stages have been enriched by Sb as well.

Argentiferous Strieborna vein of the Rožňava ore field occurs at the southwestern margin of the Gemeric Unit (Slovakia). The hydrothermal mineralization of the vein closely related to the Early Cretaceous tectonometamorphic shortening of the Western Carpathians. For their emplacement, the vein used the steeply dipping, fan-like cleavage and dislocation set of the Alpine regional structure. Successively the vein was integrated into the sinistral transpressional regime of the Transgemeric shear zone. A polyphase vein filling comprises Variscan metasomatic siderite remnants and the Early Cretaceous syntectonic hydrothermal mineralization, the latter consisting of two mineralization phases, quartz-siderite and quartz-sulphidic. During Cretaceous shear zone transpressional events, the vein was segmented into five individual bodies and redistributed to kinematically and geometrically different tensional and compressional boudins. The vein asymmetry increase, different vertical mineralization content and spatial distribution of mineral phases representing individual mineralization periods directly relate to a rheological contrast between the vein and surrounding rocks stress and pressure shadows distribution. The actual form and distribution of the Strieborna vein segments is the product of four boudin evolution stages: (1) pre-deformation, (2) initial, (3) boudin-forming and (4) boudin-differentiation stage that controlled vertical mineralization distribution. The sulphidic mineralization is dominated by two generations of argentiferous tetrahedrite and two youngest sulphosalts associations enriched by Sb and Bi. The youngest sulphosalts of the stibnite phase at the Strieborna vein resemble contemporaneous mineral associations at the nearby Čučma stibnite vein lode. Both vein occurrences located within the Transgemeric shear zone belong to the Rožňava ore field and they are cut by the same diagonal strike-slip fault. These analogies indicate a similar genesis of terminal associations at both these vein deposits. Results of the Strieborna vein sulphosalts spatial analysis confirm their vertical zonation. The Sb and Ag contents decrease, while Bi contents increase, with depth and conserve boudin evolution stages created in distinct rheological environments. The vertical boudin arrangement concentrates economically most prospective parts into asymmetric boudin tension shadows.