Graphene[1] -a flat monolayer of carbon atoms tightly packed into a two-dimensional (2D) honeycomb lattice -is the basal building block in all graphitic materials. [2] Since it was first reported in 2004, [1] graphene has attracted great interest because of the unique electronic, [3][4][5][6][7][8][9][10] thermal, [11] and mechanical properties [12,13] arising from its strictly 2D structure, and to its potential technical applications. [2,[13][14][15][16] However, producing graphene on a large scale using existing mechanical methods is still unfeasible. Searching for alternative chemical approaches is an urgent matter. [17] However, the hydrophobic nature of graphene and its strong tendency to agglomerate in solvents [13] present a great challenge to the development of fabrication methods, and severely restrict its promising applications. Although the mechanism involved remains unproven, [18] the chemical reduction of readily available exfoliated graphite oxide (GO) with reducing agents such as hydrazine and dimethylhydrazine is a promising strategy in the large-scale production of graphene. [13,18,19] Unfortunately, the reducing agents involved are very hazardous, and the graphene obtained presents irreversibly agglomerated features in solvents that do not contain polymer surfactants.[13] Here, we report a new green route for the synthesis of processable graphene on a large scale. We observed that a stable graphene suspension could be quickly prepared by simply heating an exfoliated-GO suspension under strongly alkaline conditions at moderate temperatures (50-90 8C) (Figure 1a). Our initial purpose was to introduce functional groups to exfoliated GO by free-radical addition.[20] Surprisingly, the addition of NaOH to the GO suspension -to improve the solubility of the alkyl free-radical initiator, which is carboxyl-terminated -was accompanied by a fast, unexpected color change (from yellow-brown to homogeneous black). Careful experiments revealed that exfoliated GO can undergo fast deoxygenation in strongly alkaline solutions, resulting in stable aqueous graphene suspensions (Figure 1b). Typically, 150 mL of exfoliated-GO suspension (0.5-1 mL mg À1 ) and 1-2 mL NaOH or KOH solution (8 M) were loaded into a jacketed vessel, with hot water circulating through the outer chamber ( Figure 1S, Supporting Information). The temperature of the circulating water was constantly controlled by a temperature circulator, and the whole vessel was subjected to mild sonication (25 W, 40 KHz). The yellow-brown exfoliated-GO suspension became black after it was kept at the desired temperature (e.g. 80 8C) for a few minutes. The 13 C NMR spectrum of the GO (Figure 2a) confirms the presence of abundant epoxide and hydroxyl groups, [21] which should align perpendicular to the basal-plane carbon atoms. The carboxyl groups, which are located at the edges of the basal plane, are too few for 13 C NMR detection, in agreement with previous studies [21] on GO prepared by the Hummers method.[22] After the reaction, however, the exfoliated GO (...

Continuous ongoing development of dense integrated circuits requires significant advancements in nanoscale patterning technology. As a key process in semiconductor high volume manufacturing (HVM), high resolution lithography is crucial in keeping with Moore's law. Currently, lithography technology for the sub-7 nm node and beyond has been actively investigated approaching atomic level patterning. EUV technology is now considered to be a potential alternative to HVM for replacing in some cases ArF immersion technology combined with multi-patterning. Development of innovative resist materials will be required to improve advanced fabrication strategies. In this article, advancements in novel resist materials are reviewed to identify design criteria for establishment of a next generation resist platform. Development strategies and the challenges in next generation resist materials are summarized and discussed.

Acid catalysts are essential for various chemical reactions in the industrial hydrocarbon chemistry. Sulfonated carbon has shown promising application as a new, cheap and environmentally friendly solid acid catalyst. In this study, we prepared the sulfonated graphene acid catalyst, and it was characterized by electron microscopy, Raman spectroscopy, solid state 13 C MAS NMR, energy dispersive spectroscopy (EDS) and X-ray photoelectron spectroscopy (XPS). Catalytic hydrolysis of ethyl acetate shows that the sulfonated graphene has highly catalytic activity and can be repetitively used as a water-tolerant solid acid catalyst.

Graphene has been successfully modified with palladium nanoparticles in a facile manner by reducing palladium acetate [Pd(OAc) 2 ] in the present of sodium dodecyl sulfate (SDS), which is used as both surfactant and the reducing agent. The palladium nanoparticle-graphene hybrids (Pd-graphene hybrids) are characterized by highresolution transmission electron microscopy, atomic force microscopy, Raman spectroscopy, X-ray photoelectron spectroscopy, X-ray diffraction, and energy dispersive X-ray spectroscopy. We demonstrate that the Pd-graphene hybrids can act as an efficient catalyst for the Suzuki reaction under aqueous and aerobic conditions, with the reaction reaching completion in as little as 5 min. The influence of the preparation conditions on the catalytic activities of the hybrids is also investigated.

No abstract

No abstract

No abstract

Two-dimensional materials with abundant in-plane pores (porous 2D materials) have shown high performances as catalysts, especially for photocatalysis and electrocatalysis, owing to their distinct microstructural advantages originating from both 2D materials and porous materials. Here, the recent progress in porous 2D materials in photocatalysis and electrocatalysis is reviewed. We first highlight the influence of their special structural merits on the processes of photocatalysis and electrocatalysis, including transport of ion and/or charge carriers, surface active sites, stability, modifications, electronic band structure, and light absorption properties. Representative synthetic methods for porous 2D materials are also introduced classified by top-down and bottom-up routes. In addition, their applications in different aspects of photocatalysis and electrocatalysis are presented systematically. In conclusion, we propose some opportunities and challenges for the development of porous 2D materials, with the hope of further facilitating the applications of these emerging advanced materials in photocatalysis and electrolysis.