Along with the development of organic electronics, conductive polymer of PEDOT:PSS has been attracting more and more attention because they possess various novel electrical, optical, and mechanical properties, which render them useful in modern organic optoelectronic devices. Due to its organic nature, it is lightweight and can be fabricated into flexible devices. For better device processing and integrating, it is essential to tune their surface morphologies, and photolithography is the best choice at present. In this paper, current PEDOT:PSS patterning approaches using photolithography are reviewed, and some of our works are also briefly introduced. Appropriate photolithographic patterning process for PEDOT:PSS will enable its application in future organic electronics.

No abstract

No abstract

Photolithographically patterned highly conductive (∼1400 S/cm) poly(3,4‐ethylenedioxythio‐phene):poly(styrenesulfonate) (PEDOT:PSS) films are demonstrated as electrodes for organic light emitting diodes (OLEDs). With the assistance of hydrofluoroether (HFE) solvents and fluorinated photoresists, high‐resolution passive‐matrix OLEDs with PEDOT:PSS electrodes are fabricated, in which the OLEDs show comparable performance to those devices prepared on the indium tin oxide (ITO) electrodes. This photolithographic patterning process for PEDTO:PSS has great potential for applications which require flexible electrodes. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2014, 52, 1221–1226

A high directional backlight system that combined a composite microstructure light guide plate (LGP) with a collimated light source was proposed for eco-displays. The collimated planar light was expanded from a point light source and guided towards the normal direction by utilizing the micro-prism array on LGP. High uniformity of spatial luminous, 91%, with a narrow viewing cone of ± 4° can be achieved without additional optical films. Moreover, compared to the conventional backlight, only 5% of power consumption was needed to keep the same luminance, hence, the optical efficiency increased by a factor of 1.47.