In this study, polysulfone (PSf) nanocomposite membranes (NCM) have been fabricated by reinforcement with silica-modified zeolite (SiO2-MZ) and polyimide (PI)-SiO2-MZ as inorganic nanocomposite (NC) fillers. To evaluate the improvement in structural, mechanical, and thermal properties of PSf matrix, these nanofillers were incorporated systematically from 1 wt% to 10 wt%. Morphological analysis using transmission electron microscopy and scanning electron microscopy shows better compatibility between PI-SiO2-MZ as the inorganic nanofiller and polymer matrix as compared to SiO2-MZ filler. Physical characteristics of NCMs were studied by Fourier transform infrared spectroscopy and X-ray diffraction analysis. The appropriate ratio of PI-SiO2-MZ as nanofiller in PSf matrix was found through structural analysis. Thermal analysis using differential scanning calorimetry revealed an increase in glass transition temperature ( Tg) with increasing filler concentration. Young’s modulus of PSf/SiO2-MZ NCM (10 wt%) was found to be 1109 MPa, which was improved to 1438 MPa for PSf/PI-SiO2-MZ (10 wt%) NCM. Membrane properties like swelling degree and porosity were also calculated. The degree of swelling of NCMs decreases with decrease in the hydrophilicity of the solvent. Antibacterial properties of NCMs were explored against four bacterial strains namely Klebsella pneumonia, Salmonella typhi, Bacillus subtilis, and Staphylococcus aureus. Good antibacterial activities were obtained for PSf membranes reinforced with PSf/PI-SiO2-MZ NC filler.
Wastewater treatment is indispensable as wastewater can lead to adverse health effects and deteriorate the quality of life on earth. Photocatalysis is a facile methodology to address this issue. In this study, nanocomposites (NCs) of manganese oxide (Mn3O4) and nickel oxide (NiO) were synthesized in different weight ratios via the solid-state reaction route. Structural properties, optical properties, surface morphology, and functional group analysis of the synthesized nanomaterials were conducted using X-ray diffraction (XRD), UV– Vis spectroscopy, scanning electron microscopy (SEM) along with energy-dispersive X-ray (EDX) analysis, and Fourier-transform infrared (FTIR) spectroscopy, respectively. The bandgap of the nanocomposite decreases significantly from 2.35 eV for the Mn3O4 NPs to 1.65 eV for the Mn3O4/NiO nanocomposite (NC). Moreover, adsorption studies followed by the photocatalytic performance of the Mn3O4/NiO NCs were evaluated to determine the removal of methylene blue (MB) dye from wastewater. The photocatalytic performance of the nanocomposite enhances as the ratio of Mn3O4 in the composite increases from one weight percentage to three weight percentage. The photocatalytic degradation efficiency was calculated to be 95%. The results show that the synthesized NCs could play an important role in photocatalytic wastewater purification and environmental remediation.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.