Dye and nitro-compound pollution has become a significant issue worldwide. The adsorption and degradation of dyes and nitro-compounds have recently become important areas of study. Different methods, such as precipitation, flocculation, ultra-filtration, ion exchange, coagulation, and electro-catalytic degradation have been adopted for the adsorption and degradation of these organic pollutants. Apart from these methods, adsorption, photocatalytic degradation, and chemical degradation are considered the most economical and efficient to control water pollution from dyes and nitro-compounds. In this review, different kinds of dyes and nitro-compounds, and their adverse effects on aquatic organisms and human beings, were summarized in depth. This review article covers the comprehensive analysis of the adsorption of dyes over different materials (porous polymer, carbon-based materials, clay-based materials, layer double hydroxides, metal-organic frameworks, and biosorbents). The mechanism and kinetics of dye adsorption were the central parts of this study. The structures of all the materials mentioned above were discussed, along with their main functional groups responsible for dye adsorption. Removal and degradation methods, such as adsorption, photocatalytic degradation, and chemical degradation of dyes and nitro-compounds were also the main aim of this review article, as well as the materials used for such degradation. The mechanisms of photocatalytic and chemical degradation were also explained comprehensively. Different factors responsible for adsorption, photocatalytic degradation, and chemical degradation were also highlighted. Advantages and disadvantages, as well as economic cost, were also discussed briefly. This review will be beneficial for the reader as it covers all aspects of dye adsorption and the degradation of dyes and nitro-compounds. Future aspects and shortcomings were also part of this review article. There are several review articles on all these topics, but such a comprehensive study has not been performed so far in the literature.

No abstract

Bacteria inhabiting non-polar glaciers are exposed to large variations in temperature, which significantly affects the fluidity of bacterial cell membranes. In order to maintain normal functions of the cell membranes, psychrophilic bacteria adapt by changing the composition of cell membrane fatty acids. However, information on the exact pattern of cell membrane adaptability in non-polar low-temperature habitats is scarce. In the present study, 42 bacterial strains were isolated from the Ghulmet, Ghulkin, and Hopar glaciers of the Hunza Valley in the Karakoram Mountain Range, Pakistan and their cell membrane fatty acid distributions studied, using gas chromatography/mass spectrometry (GC-MS) for the analysis of fatty acid methyl esters (FAMEs) liberated by acid-catalyzed methanolysis. Furthermore, Gram-negative and Gram-positive groups were grown under different temperature settings (5, 15, 25, and 35 • C) in order to determine the effect of temperature on cell membrane (CM) fatty acid distribution. The analyses identified the major groups of cell membrane fatty acids (FA) as straight-chain monounsaturated fatty acids (n-MUFAs) and branched fatty acids (br-FAs), accounting for more than 70% of the fatty acids analyzed. The distribution of br-FAs and n-FAs in bacterial cell membranes was significantly affected by temperature, with the level of br-FAs decreasing relative to n-FAs with increasing temperature. Notably, the production of polyunsaturated fatty acids (PUFAs) was only seen at lower temperatures. This study contributes to understanding, for the first time, the role of br-FAs in the maintenance of cell membrane fluidity of bacteria inhabiting non-polar habitats.

No abstract

In recent years, tremendous efforts have been made to investigate tribomaterials for triboelectric nanogenerators (TENGs), but due to their low performance there is still need of tribomaterials with new mechanisms for performance enhancement. Therefore, in this study, the potential of conducting polyaniline and tribonegative graphene oxide is exploited for performance enhancement of tribopositive material through a new mechanism of disturbing the equilibrium state inside the tribopositive material under an impact force. Thus, a TENG device made up of polymer with 700 µL polyaniline and 4 mg mL−1 graphene oxide as tribopositive and polydimethylsiloxane as a tribonegative layer with a dimension of 1 × 2 cm2 is able to produce an open‐circuit voltage of 314.92 V and a current density of 37.81 mA m−2 with a peak power density of 10.43 W m−2, which can directly power ON more than 175 white light‐emitting diodes. Amine group of polyaniline and its pathway to mobilize electrons inside the tribopositive material due to electron accepting ability of graphene oxide upon physical contact under external force are the main contributing factors toward performance enhancement. This work introduces a low cost, easy fabrication process with a new method for performance enhancement of tribopositive material to acquire a high performance TENGs.