Growth of biofilms of G. sulfurreducens on glassy carbon that yield a bioelectrocatalytic response to acetate oxidation is achieved using a fixed applied potential, with current density for acetate oxidation scaling with applied potential. In contrast biofilms grown under electron acceptor-limiting conditions display redox signals shifted to lower potentials and do not oxidise acetate.

Engineering bioelectronic components and set-ups that mimic natural systems is extremely challenging. Here we report the design of a protein-only redox film inspired by the architecture of bacterial electroactive biofilms. The nanowire scaffold is formed using a chimeric protein that results from the attachment of a prion domain to a rubredoxin (Rd) that acts as an electron carrier. The prion domain self-assembles into stable fibres and provides a suitable arrangement of redox metal centres in Rd to permit electron transport. This results in highly organized films, able to transport electrons over several micrometres through a network of bionanowires. We demonstrate that our bionanowires can be used as electron-transfer mediators to build a bioelectrode for the electrocatalytic oxygen reduction by laccase. This approach opens opportunities for the engineering of protein-only electron mediators (with tunable redox potentials and optimized interactions with enzymes) and applications in the field of protein-only bioelectrodes.

Access to safe drinking water is a human right, crucial to combat inequalities, reduce poverty and allow sustainable development. In many areas of the world, however, this right is not guaranteed, in part because of the lack of easily deployable diagnostic tools. Low-cost and simple methods to test water supplies onsite can protect vulnerable communities from the impact of contaminants in drinking water. Ideally such devices would also be easy to dispose of so as to leave no trace, or have a detrimental effect on the environment. To this aim, we here report the first paper microbial fuel cell (pMFC) fabricated by screen-printing biodegradable carbon-based electrodes onto a single sheet of paper, and demonstrate its use as a shock sensor for bioactive compounds (e.g. formaldehyde) in water. We also show a simple route to enhance the sensor performance by folding back-to-back two pMFCs electrically connected in parallel. This promising proof of concept work can lead to a revolutionizing way of testing water at point of use, which is not only green, easy-to-operate and rapid, but is also affordable to all.

Biofilms of the electroactive bacterium Geobacter sulfurreducens were induced to grow on graphite-rod electrodes under a potential of 0 V (vs Ag/AgCl) in the presence of acetate as an electron donor. Increased anodic currents for bioelectrocatalytic oxidation of acetate were obtained when the electrodes were incubated for longer periods with periodic electron-donor feeding. The maximum current density for acetate oxidation increased 2.8-fold, and the biofilm thickness increased by 4.25-fold, over a time period of 83-147 h. Cyclic voltammetry in the presence of acetate supports a model of heterogeneous electron transfer, one electron at time, from biofilm to electrode through a dominant redox species centered at -0.41 V vs Ag/AgCl. Voltammetry performed under nonturnover conditions provided an estimate of the surface coverage of the redox species of 25 nmol/cm(2). This value was used to estimate a redox species concentration of 7.3 mM within the 34-μm-thick biofilm and a charge-transport diffusion coefficient of 3.6 × 10(-7) cm(2)/s. This value of diffusion coefficient is greater than that observed in traditional thin-film voltammetric studies with redox polymer films containing much higher surface concentrations of redox species and might be associated with proton transport to ensure electroneutrality within the biofilm upon electrolysis.

No abstract

No abstract

Layer-by-layer (LBL) assembly of alternate osmium redox polymers and glucose oxidase, at anode, and laccase, at cathode, using graphite electrodes form a membrane-less glucose/O2 enzymatic fuel cell providing a power density of 103 μW cm−2 at pH 5.5.

Self-assembled redox protein nanowires have been exploited as efficient electron shuttles for an oxygen-tolerant hydrogenase. An intra/inter-protein electron transfer chain has been achieved between the iron-sulfur centers of rubredoxin and the FeS cluster of [NiFe] hydrogenases. [NiFe] Hydrogenases entrapped in the intricated matrix of metalloprotein nanowires achieve a stable, mediated bioelectrocatalytic oxidation of H at low-overpotential.